Custom rule sets
-
- Participant
- Posts: 248
- Joined: Fri Jul 30, 2010 9:04 am
asked the admin and got the current database files which are used for the reference.
so when I use CASS stage to correct the address the input from a file should
be addr1,addr2,addr3,city,state,zip
In the properties of CASS stage
there is a folder form3553 under this folder there are 3 fields to be filled.
one is company name,list identifier,output file.
Is there any specific file from which the date is taken.?
so when I use CASS stage to correct the address the input from a file should
be addr1,addr2,addr3,city,state,zip
In the properties of CASS stage
there is a folder form3553 under this folder there are 3 fields to be filled.
one is company name,list identifier,output file.
Is there any specific file from which the date is taken.?
Regards,
Kenny
Kenny
ISD Job? what is an ISD Job? and how do you specify the parameter to 10000?
please advice
[quote="JRodriguez"]Kennyapril,
Reading through your post look like you just need a QS job with a CASS std stage exposed as a service using ISD
CASS don't return all addresses from the USPS reference database that match the address provided. It just return the input address with the enhancement from the process when a match is found in the reference database
Also be aware that when using CASS in a ISD job you must set the maximum runtime parameter to 10000 for the job. This allow to restart the job every 2 1/2 hours and ensures that the job retrieves the most current CASS data that is installed. (CASS data expired every 105 days)
The good news is that an ISD job could use expired data (This is the only way to reuse an expired database ) :D[/quote]
please advice
[quote="JRodriguez"]Kennyapril,
Reading through your post look like you just need a QS job with a CASS std stage exposed as a service using ISD
CASS don't return all addresses from the USPS reference database that match the address provided. It just return the input address with the enhancement from the process when a match is found in the reference database
Also be aware that when using CASS in a ISD job you must set the maximum runtime parameter to 10000 for the job. This allow to restart the job every 2 1/2 hours and ensures that the job retrieves the most current CASS data that is installed. (CASS data expired every 105 days)
The good news is that an ISD job could use expired data (This is the only way to reuse an expired database ) :D[/quote]
-
- Participant
- Posts: 248
- Joined: Fri Jul 30, 2010 9:04 am
-
- Participant
- Posts: 248
- Joined: Fri Jul 30, 2010 9:04 am
-
- Participant
- Posts: 527
- Joined: Thu Apr 19, 2007 1:25 am
- Location: Melbourne
-
- Participant
- Posts: 248
- Joined: Fri Jul 30, 2010 9:04 am
Thanks for the Information.
In the job I used CASS stage for correcting the address,So is it something when the input is any address the output will be a correct address.
Coming to standardized stage,After using the CASS stage the next stage I use is standardize stage to standardize the correct address.
please suggest me is this the right flow to get the output required?
(output required is- the addresses which are standardized from the correct address)
In the job I used CASS stage for correcting the address,So is it something when the input is any address the output will be a correct address.
Coming to standardized stage,After using the CASS stage the next stage I use is standardize stage to standardize the correct address.
please suggest me is this the right flow to get the output required?
(output required is- the addresses which are standardized from the correct address)
Regards,
Kenny
Kenny
-
- Participant
- Posts: 54607
- Joined: Wed Oct 23, 2002 10:52 pm
- Location: Sydney, Australia
- Contact:
-
- Participant
- Posts: 248
- Joined: Fri Jul 30, 2010 9:04 am
Actually first I designed a service using only CASS stage,i.e only to correct the address.
so when I test his service with soap UI tool
the request which I sent is
<addr_line1>1800 holand dr</addr_line1>
<city>somerset</city>
<state>NJ</state>
<zip>08873</zip>
and the response I received is
<addr_line1>1800 holand dr</addr_line1>
<city>somerset</city>
<state>NJ</state>
<zip>8873</zip>
<zip5_cass xsi:nil="true"/>
<zip4_cass xsi:nil="true"/>
<deliverypoint_cass xsi:nil="true"/>
<deliverypointchkdigit_cass xsi:nil="true"/>
<carrierroute_cass xsi:nil="true"/>
<city_cass xsi:nil="true"/>
<state_cass xsi:nil="true"/>
<urbanization_cass xsi:nil="true"/>
<recipient_cass xsi:nil="true"/>
<deliveryaddressline1_cass>1800 holand dr</deliveryaddressline1_cass>
<deliveryaddressline2_cass xsi:nil="true"/>
<lacindicator_cass xsi:nil="true"/>
<dpvmatchflag_cass xsi:nil="true"/>
<dpvcommflag_cass xsi:nil="true"/>
<dpvfpflag_cass xsi:nil="true"/>
<dpvcode1_cass>A1</dpvcode1_cass>
<dpvcode2_cass xsi:nil="true"/>
<dpvcode3_cass xsi:nil="true"/>
<lacsflag_cass xsi:nil="true"/>
<lacsreturncode_cass xsi:nil="true"/>
I dont see any difference in the address given,that was a wrong address with spelling mistake in the street name and did not get the correct response.
please rectify my mistake!!
Thanks,
so when I test his service with soap UI tool
the request which I sent is
<addr_line1>1800 holand dr</addr_line1>
<city>somerset</city>
<state>NJ</state>
<zip>08873</zip>
and the response I received is
<addr_line1>1800 holand dr</addr_line1>
<city>somerset</city>
<state>NJ</state>
<zip>8873</zip>
<zip5_cass xsi:nil="true"/>
<zip4_cass xsi:nil="true"/>
<deliverypoint_cass xsi:nil="true"/>
<deliverypointchkdigit_cass xsi:nil="true"/>
<carrierroute_cass xsi:nil="true"/>
<city_cass xsi:nil="true"/>
<state_cass xsi:nil="true"/>
<urbanization_cass xsi:nil="true"/>
<recipient_cass xsi:nil="true"/>
<deliveryaddressline1_cass>1800 holand dr</deliveryaddressline1_cass>
<deliveryaddressline2_cass xsi:nil="true"/>
<lacindicator_cass xsi:nil="true"/>
<dpvmatchflag_cass xsi:nil="true"/>
<dpvcommflag_cass xsi:nil="true"/>
<dpvfpflag_cass xsi:nil="true"/>
<dpvcode1_cass>A1</dpvcode1_cass>
<dpvcode2_cass xsi:nil="true"/>
<dpvcode3_cass xsi:nil="true"/>
<lacsflag_cass xsi:nil="true"/>
<lacsreturncode_cass xsi:nil="true"/>
I dont see any difference in the address given,that was a wrong address with spelling mistake in the street name and did not get the correct response.
please rectify my mistake!!
Thanks,
Regards,
Kenny
Kenny
-
- Participant
- Posts: 527
- Joined: Thu Apr 19, 2007 1:25 am
- Location: Melbourne
Looking at that, it has obviously said it can't verify the address.
But you should know that, based on DPV code 1, and the fact that you should have the doco for the CASS stage and will understand the output codes.
I did a quick online check of that using QAS and it verified it fine. So maybe there is an issue with your CASS setup. ?
Is that the only test you have done? Does it verify other addresses that are entered correctly? Others that have minor mistakes?
But you should know that, based on DPV code 1, and the fact that you should have the doco for the CASS stage and will understand the output codes.
I did a quick online check of that using QAS and it verified it fine. So maybe there is an issue with your CASS setup. ?
Is that the only test you have done? Does it verify other addresses that are entered correctly? Others that have minor mistakes?
-
- Participant
- Posts: 248
- Joined: Fri Jul 30, 2010 9:04 am
In the documentation given by IBM along with the tool I did not find the CASS stage document in quality stage guide.
Some of the addresses entered return with the zip code with addition of 4
but none of the entered wrong address is not giving the response as the correct address.
I changed the datatype for zip to varchar but no change in the output.
any suggestions please?
Some of the addresses entered return with the zip code with addition of 4
but none of the entered wrong address is not giving the response as the correct address.
I changed the datatype for zip to varchar but no change in the output.
any suggestions please?
Regards,
Kenny
Kenny