Regarding Datastage Installation
Posted: Mon Jun 16, 2014 11:41 pm
Hi All,
In the morning today I have installed DS8.5 in my desktop(Windows).I created a job as RowGen---> Transformer---->Peek.
To Check whether parallel jobs are working fine.
The following error were encountered during the compilation of the job.
{ Name of the Job:Test2}
Find the error message below:
Output from transformer compilation follows:
##I IIS-DSEE-TFCN-00001 10:39:03(000) <main_program>
IBM WebSphere DataStage Enterprise Edition 8.5.0.5746
Copyright (c) 2001, 2005-2008 IBM Corporation. All rights reserved
##I IIS-DSEE-TFCN-00006 10:39:03(001) <main_program> conductor uname: -s=Windows_NT; -r=1; -v=6; -n=NAVEEN-PC; -m=Pentium
##I IIS-DSEE-TOSH-00002 10:39:03(002) <main_program> orchgeneral: loaded
##I IIS-DSEE-TOSH-00002 10:39:03(003) <main_program> orchsort: loaded
##I IIS-DSEE-TOSH-00002 10:39:03(004) <main_program> orchstats: loaded
##W IIS-DSEE-TOSH-00049 10:39:03(007) <main_program> Parameter specified but not used in flow: DSPXWorkingDir
##E IIS-DSEE-TBLD-00076 10:39:05(000) <main_program> Error when checking composite operator: Subprocess command failed with exit status 256.
##E IIS-DSEE-TFSR-00019 10:39:05(001) <main_program> Could not check all operators because of previous error(s)
##W IIS-DSEE-TFTM-00012 10:39:05(002) <transform> Error when checking composite operator: The number of reject datasets "0" is less than the number of input datasets "1".
##I IIS-DSEE-TBLD-00079 10:39:05(003) <transform> Error when checking composite operator: cxx -O -IC:/IBM/InformationServer/Server/PXEngine/include -W/TP -W/EHa -DAPT_USE_ANSI_IOSTREAMS -c -W/Zc:wchar_t- C:/IBM/InformationServer/Server/Projects/dstage1/RT_BP3.O/V0S3_Test2_Transformer_3.C -o C:/IBM/InformationServer/Server/Projects/dstage1/RT_BP3.O/V0S3_Test2_Transformer_3.tmp.o.
##I IIS-DSEE-TBLD-00000 10:39:05(004) <main_program> Error when checking composite operator: Output from subprocess: Compiler "cl" not found.
##E IIS-DSEE-TCOS-00029 10:39:05(005) <main_program> Creation of a step finished with status = FAILED. (Test2.Transformer_3)
*** Internal Generated Transformer Code follows:
0001: //
0002: // Generated file to implement the V0S3_Test2_Transformer_3 transform operator.
0003: //
0004:
0005: // define our input/output link names
0006: inputname 0 DSLink2;
0007: outputname 0 DSLink5;
0008:
0009: initialize {
0010: // define our control variables
0011: int8 RowRejected0;
0012: int8 NullSetVar0;
0013:
0014: }
0015:
0016: mainloop {
0017:
0018: // initialise the rejected row variable
0019: RowRejected0 = 1;
0020:
0021: // evaluate columns (no constraints) for link: DSLink5
0022: writerecord 0;
0023: RowRejected0 = 0;
0024: }
0025:
0026: finish {
0027: }
0028:
*** End of Internal Generated Transformer Code
Does anyone had the same problem ??????
Questions:
1.Do we need to change any compiler setting in 8.5 after the installation of datastage8.5 ?
In the morning today I have installed DS8.5 in my desktop(Windows).I created a job as RowGen---> Transformer---->Peek.
To Check whether parallel jobs are working fine.
The following error were encountered during the compilation of the job.
{ Name of the Job:Test2}
Find the error message below:
Output from transformer compilation follows:
##I IIS-DSEE-TFCN-00001 10:39:03(000) <main_program>
IBM WebSphere DataStage Enterprise Edition 8.5.0.5746
Copyright (c) 2001, 2005-2008 IBM Corporation. All rights reserved
##I IIS-DSEE-TFCN-00006 10:39:03(001) <main_program> conductor uname: -s=Windows_NT; -r=1; -v=6; -n=NAVEEN-PC; -m=Pentium
##I IIS-DSEE-TOSH-00002 10:39:03(002) <main_program> orchgeneral: loaded
##I IIS-DSEE-TOSH-00002 10:39:03(003) <main_program> orchsort: loaded
##I IIS-DSEE-TOSH-00002 10:39:03(004) <main_program> orchstats: loaded
##W IIS-DSEE-TOSH-00049 10:39:03(007) <main_program> Parameter specified but not used in flow: DSPXWorkingDir
##E IIS-DSEE-TBLD-00076 10:39:05(000) <main_program> Error when checking composite operator: Subprocess command failed with exit status 256.
##E IIS-DSEE-TFSR-00019 10:39:05(001) <main_program> Could not check all operators because of previous error(s)
##W IIS-DSEE-TFTM-00012 10:39:05(002) <transform> Error when checking composite operator: The number of reject datasets "0" is less than the number of input datasets "1".
##I IIS-DSEE-TBLD-00079 10:39:05(003) <transform> Error when checking composite operator: cxx -O -IC:/IBM/InformationServer/Server/PXEngine/include -W/TP -W/EHa -DAPT_USE_ANSI_IOSTREAMS -c -W/Zc:wchar_t- C:/IBM/InformationServer/Server/Projects/dstage1/RT_BP3.O/V0S3_Test2_Transformer_3.C -o C:/IBM/InformationServer/Server/Projects/dstage1/RT_BP3.O/V0S3_Test2_Transformer_3.tmp.o.
##I IIS-DSEE-TBLD-00000 10:39:05(004) <main_program> Error when checking composite operator: Output from subprocess: Compiler "cl" not found.
##E IIS-DSEE-TCOS-00029 10:39:05(005) <main_program> Creation of a step finished with status = FAILED. (Test2.Transformer_3)
*** Internal Generated Transformer Code follows:
0001: //
0002: // Generated file to implement the V0S3_Test2_Transformer_3 transform operator.
0003: //
0004:
0005: // define our input/output link names
0006: inputname 0 DSLink2;
0007: outputname 0 DSLink5;
0008:
0009: initialize {
0010: // define our control variables
0011: int8 RowRejected0;
0012: int8 NullSetVar0;
0013:
0014: }
0015:
0016: mainloop {
0017:
0018: // initialise the rejected row variable
0019: RowRejected0 = 1;
0020:
0021: // evaluate columns (no constraints) for link: DSLink5
0022: writerecord 0;
0023: RowRejected0 = 0;
0024: }
0025:
0026: finish {
0027: }
0028:
*** End of Internal Generated Transformer Code
Does anyone had the same problem ??????
Questions:
1.Do we need to change any compiler setting in 8.5 after the installation of datastage8.5 ?