Compilation Error!
Posted: Wed Jul 01, 2009 1:29 am
Hi,
I am getting fllowing compilation error in the transformer stage:-
Output from transformer compilation follows:
##I TFCN 000001 12:55:04(000) <main_program>
IBM DataStage(tm) Parallel Extender 7.5.3
Copyright (c) 2004, 1997-2004 Ascential Software Corporation.
All Rights Reserved
##I TUTL 000031 12:55:04(001) <main_program> The open files limit is 2000; raising to 2147483647.
##I TOSH 000002 12:55:04(002) <main_program> orchgeneral: loaded
##I TOSH 000002 12:55:04(003) <main_program> orchsort: loaded
##I TOSH 000002 12:55:04(004) <main_program> orchstats: loaded
##I TFSC 000001 12:55:04(007) <main_program> APT configuration file: /dshome/Ascential/DataStage/Configurations/default.apt
##W TCOS 000049 12:55:04(008) <main_program> Parameter specified but not used in flow: DSPXWorkingDir
##E TBLD 000000 12:55:38(000) <main_program> Error when checking composite operator: Subprocess command failed with exit status 256.
##E TFSR 000019 12:55:38(001) <main_program> Could not check all operators because of previous error(s)
##W TFCP 000000 12:55:38(002) <transform> Error when checking composite operator: The number of reject datasets "0" is less than the number of input datasets "1".
##W TBLD 000000 12:55:38(003) <main_program> Error when checking composite operator: Output from subprocess: 1540-5216 (S) No licenses available. Please install the licenses that accompany the licensed product. If you have obtained a Try and Buy version, please contact your program supplier to obtain a fully licensed product.
##I TFCP 000000 12:55:38(004) <transform> Error when checking composite operator: /usr/vacpp/bin/xlC_r -O -I/dshome/Ascential/DataStage/PXEngine/include -O -c -qspill=32704 /dshome/Ascential/DataStage/Projects/IRPMIS/RT_BP246.O/V0S4_TEST_PREPAID_GROSS_ADDS_Transformer_4.C -o /dshome/Ascential/DataStage/Projects/IRPMIS/RT_BP246.O/V0S4_TEST_PREPAID_GROSS_ADDS_Transformer_4.tmp.o.
##E TCOS 000029 12:55:38(005) <main_program> Creation of a step finished with status = FAILED. (TEST_PREPAID_GROSS_ADDS.Transformer_4)
*** Internal Generated Transformer Code follows:
0001: //
0002: // Generated file to implement the V0S4_repos_Transformer_4 transform operator.
0003: //
0004:
0005: // define our input/output link names
0006: inputname 0 DSLink5;
0007: outputname 0 DSLink6;
0008:
0009: initialize {
0010: // define our row rejected variable
0011: int8 RowRejected0;
0012:
0013: // define our null set variable
0014: int8 NullSetVar0;
0015:
0016: }
0017:
0018: mainloop {
0019: // initialise our row rejected variable
0020: RowRejected0 = 1;
0021:
0022: // evaluate columns (no constraints) for link: DSLink6
0023: writerecord 0;
0024: RowRejected0 = 0;
0025: }
0026:
0027: finish {
0028: }
0029:
*** End of Internal Generated Transformer Code
But those transformers which are already compiled,those are not getting problem.
So please help me to resolve this problem.
Regards
Prasoon Kumar
I am getting fllowing compilation error in the transformer stage:-
Output from transformer compilation follows:
##I TFCN 000001 12:55:04(000) <main_program>
IBM DataStage(tm) Parallel Extender 7.5.3
Copyright (c) 2004, 1997-2004 Ascential Software Corporation.
All Rights Reserved
##I TUTL 000031 12:55:04(001) <main_program> The open files limit is 2000; raising to 2147483647.
##I TOSH 000002 12:55:04(002) <main_program> orchgeneral: loaded
##I TOSH 000002 12:55:04(003) <main_program> orchsort: loaded
##I TOSH 000002 12:55:04(004) <main_program> orchstats: loaded
##I TFSC 000001 12:55:04(007) <main_program> APT configuration file: /dshome/Ascential/DataStage/Configurations/default.apt
##W TCOS 000049 12:55:04(008) <main_program> Parameter specified but not used in flow: DSPXWorkingDir
##E TBLD 000000 12:55:38(000) <main_program> Error when checking composite operator: Subprocess command failed with exit status 256.
##E TFSR 000019 12:55:38(001) <main_program> Could not check all operators because of previous error(s)
##W TFCP 000000 12:55:38(002) <transform> Error when checking composite operator: The number of reject datasets "0" is less than the number of input datasets "1".
##W TBLD 000000 12:55:38(003) <main_program> Error when checking composite operator: Output from subprocess: 1540-5216 (S) No licenses available. Please install the licenses that accompany the licensed product. If you have obtained a Try and Buy version, please contact your program supplier to obtain a fully licensed product.
##I TFCP 000000 12:55:38(004) <transform> Error when checking composite operator: /usr/vacpp/bin/xlC_r -O -I/dshome/Ascential/DataStage/PXEngine/include -O -c -qspill=32704 /dshome/Ascential/DataStage/Projects/IRPMIS/RT_BP246.O/V0S4_TEST_PREPAID_GROSS_ADDS_Transformer_4.C -o /dshome/Ascential/DataStage/Projects/IRPMIS/RT_BP246.O/V0S4_TEST_PREPAID_GROSS_ADDS_Transformer_4.tmp.o.
##E TCOS 000029 12:55:38(005) <main_program> Creation of a step finished with status = FAILED. (TEST_PREPAID_GROSS_ADDS.Transformer_4)
*** Internal Generated Transformer Code follows:
0001: //
0002: // Generated file to implement the V0S4_repos_Transformer_4 transform operator.
0003: //
0004:
0005: // define our input/output link names
0006: inputname 0 DSLink5;
0007: outputname 0 DSLink6;
0008:
0009: initialize {
0010: // define our row rejected variable
0011: int8 RowRejected0;
0012:
0013: // define our null set variable
0014: int8 NullSetVar0;
0015:
0016: }
0017:
0018: mainloop {
0019: // initialise our row rejected variable
0020: RowRejected0 = 1;
0021:
0022: // evaluate columns (no constraints) for link: DSLink6
0023: writerecord 0;
0024: RowRejected0 = 0;
0025: }
0026:
0027: finish {
0028: }
0029:
*** End of Internal Generated Transformer Code
But those transformers which are already compiled,those are not getting problem.
So please help me to resolve this problem.
Regards
Prasoon Kumar