creating Routine in IIS 8.0.1

Post questions here relative to DataStage Enterprise/PX Edition for such areas as Parallel job design, Parallel datasets, BuildOps, Wrappers, etc.

Moderators: chulett, rschirm, roy

Post Reply
Geetha_M
Participant
Posts: 13
Joined: Fri Oct 31, 2008 12:12 am

creating Routine in IIS 8.0.1

Post by Geetha_M »

Hi,

I want to create a routine for Datastage 8.0 version.
I have followed the steps given for datastage7.5 as specified inone of the posts of this forum.
Im getting the following error :

NuTCRACKER not properly installed. The pathname:
C:/PROGRA~1/MKSTOO~1/include
is missing from the 'INCLUDE' environment variable.

Please let me know if have to follow the same steps,if so how to resolve this problem or let me know the steps to be follwed for 8.0

Other problem is in 8.0 version there is no manager so, how to create the routines.

Thanks in advance...
Top
hamzaqk
Participant
Posts: 249
Joined: Tue Apr 17, 2007 5:50 am
Location: islamabad

Post by hamzaqk »

its seems like the nutcracker is going nuts :D.. not installed properly ?
Teradata Certified Master V2R5
Top
hamzaqk
Participant
Posts: 249
Joined: Tue Apr 17, 2007 5:50 am
Location: islamabad

Post by hamzaqk »

its seems like the nutcracker is going nuts :D.. not installed properly ?
Teradata Certified Master V2R5
Top
chulett
Charter Member
Charter Member
Posts: 43085
Joined: Tue Nov 12, 2002 4:34 pm
Location: Denver, CO

Post by chulett »

Yes, a search for "NuTCRACKER not properly installed" here seems to imply a faulty installation that needs to be repeated.
-craig

"You can never have too many knives" -- Logan Nine Fingers
Top
4friends
Participant
Posts: 71
Joined: Tue May 01, 2007 12:51 pm
Location: Mumbai

Re: creating Routine in IIS 8.0.1

Post by 4friends »

hi In DS8, U had manager merged with designer and u got the routines inside the repository in the designer so u can create ur custom routines in that
thanks & regards
kk
Top
ray.wurlod
Participant
Posts: 54607
Joined: Wed Oct 23, 2002 10:52 pm
Location: Sydney, Australia
Contact:
Contact ray.wurlod

Post by ray.wurlod »

I happen to know that U is currently involved in a server-only project, so that your advice is not appropriate.
IBM Software Services Group
Any contribution to this forum is my own opinion and does not necessarily reflect any position that IBM may hold.
Top
Geetha_M
Participant
Posts: 13
Joined: Fri Oct 31, 2008 12:12 am

Post by Geetha_M »

Now im able to create routines and but getting following error when trying to compile the job.

Output from transformer compilation follows:

##I IIS-DSEE-TFCN-00001 12:01:40(000) <main_program>
IBM WebSphere DataStage Enterprise Edition 8.0.1.4665
Copyright (c) 2001, 2005-2007 IBM Corporation. All rights reserved



##I IIS-DSEE-TOSH-00002 12:01:40(001) <main_program> orchgeneral: loaded
##I IIS-DSEE-TOSH-00002 12:01:40(002) <main_program> orchsort: loaded
##I IIS-DSEE-TOSH-00002 12:01:40(003) <main_program> orchstats: loaded
##W IIS-DSEE-TOSH-00049 12:01:40(006) <main_program> Parameter specified but not used in flow: DSPXWorkingDir
##E IIS-DSEE-TBLD-00076 12:01:44(000) <main_program> Error when checking composite operator: Subprocess command failed with exit status 40,192.
##E IIS-DSEE-TFSR-00019 12:01:44(001) <main_program> Could not check all operators because of previous error(s)
##W IIS-DSEE-TFTM-00012 12:01:44(002) <transform> Error when checking composite operator: The number of reject datasets "0" is less than the number of input datasets "1".
##I IIS-DSEE-TBLD-00000 12:01:44(003) <main_program> Error when checking composite operator: Output from subprocess: C:\IBM\InformationServer\Server\PXEngine\include\apt_util\keylookup.h(1148) : warning C4251: 'APT_KeyLookupRange::rangeOptions_' : class 'std::vector<_Ty>' needs to have dll-interface to be used by clients of class 'APT_KeyLookupRange'
with
[
_Ty=APT_KeyLookupRange::rangeOption
]
C:\IBM\InformationServer\Server\Projects\demo_geetha\RT_BP29.O\V0S1_routine_test_Transformer_1.C(316) : warning C4244: '=' : conversion from 'APT_Int64' to 'int', possible loss of data

##I IIS-DSEE-TBLD-00079 12:01:44(004) <transform> Error when checking composite operator: cxx -LC:/IBM/InformationServer/Server/Projects/demo_geetha/RT_BP29.O/ -LC:/IBM/InformationServer/Server/PXEngine/lib -LC:/IBM/InformationServer/Server/PXEngine/user_lib -s -W/dll -W/base:0x50000000 -lliborchnt -lliborchcorent -lliborchbuildopnt D:/geetha/mike.obj.o C:/IBM/InformationServer/Server/Projects/demo_geetha/RT_BP29.O/V0S1_routine_test_Transformer_1.tmp.o -o C:/IBM/InformationServer/Server/Projects/demo_geetha/RT_BP29.O/V0S1_routine_test_Transformer_1.dll.
##I IIS-DSEE-TBLD-00000 12:01:44(005) <main_program> Error when checking composite operator: Output from subprocess: LINK : fatal error LNK1181: cannot open input file 'D:\geetha\mike.obj.o'

##E IIS-DSEE-TCOS-00029 12:01:44(006) <main_program> Creation of a step finished with status = FAILED. (routine_test.Transformer_1)

*** Internal Generated Transformer Code follows:
0001: //
0002: // Generated file to implement the V0S1_routine_test_Transformer_1 transform operator.
0003: //
0004:
0005: // define external functions used
0006: extern uint32 mike(uint32 mike);
0007:
0008: // define our input/output link names
0009: inputname 0 DSLink3;
0010: outputname 0 DSLink4;
0011:
0012: initialize {
0013: // define our row rejected variable
0014: int8 RowRejected0;
0015:
0016: // define our null set variable
0017: int8 NullSetVar0;
0018:
0019: }
0020:
0021: mainloop {
0022: // initialise our row rejected variable
0023: RowRejected0 = 1;
0024:
0025: // declare our intermediate variables for this section
0026: uint32 InterVar0_0;
0027:
0028: // evaluate columns (no constraints) for link: DSLink4
0029: InterVar0_0 = DSLink3.id;
0030: DSLink4.id = mike(InterVar0_0);
0031: writerecord 0;
0032: RowRejected0 = 0;
0033: }
0034:
0035: finish {
0036: }
0037:
*** End of Internal Generated Transformer Code
Top
Geetha_M
Participant
Posts: 13
Joined: Fri Oct 31, 2008 12:12 am

Post by Geetha_M »

Now im able to create routines and but getting following error when trying to compile the job.

Output from transformer compilation follows:

##I IIS-DSEE-TFCN-00001 12:01:40(000) <main_program>
IBM WebSphere DataStage Enterprise Edition 8.0.1.4665
Copyright (c) 2001, 2005-2007 IBM Corporation. All rights reserved



##I IIS-DSEE-TOSH-00002 12:01:40(001) <main_program> orchgeneral: loaded
##I IIS-DSEE-TOSH-00002 12:01:40(002) <main_program> orchsort: loaded
##I IIS-DSEE-TOSH-00002 12:01:40(003) <main_program> orchstats: loaded
##W IIS-DSEE-TOSH-00049 12:01:40(006) <main_program> Parameter specified but not used in flow: DSPXWorkingDir
##E IIS-DSEE-TBLD-00076 12:01:44(000) <main_program> Error when checking composite operator: Subprocess command failed with exit status 40,192.
##E IIS-DSEE-TFSR-00019 12:01:44(001) <main_program> Could not check all operators because of previous error(s)
##W IIS-DSEE-TFTM-00012 12:01:44(002) <transform> Error when checking composite operator: The number of reject datasets "0" is less than the number of input datasets "1".
##I IIS-DSEE-TBLD-00000 12:01:44(003) <main_program> Error when checking composite operator: Output from subprocess: C:\IBM\InformationServer\Server\PXEngine\include\apt_util\keylookup.h(1148) : warning C4251: 'APT_KeyLookupRange::rangeOptions_' : class 'std::vector<_Ty>' needs to have dll-interface to be used by clients of class 'APT_KeyLookupRange'
with
[
_Ty=APT_KeyLookupRange::rangeOption
]
C:\IBM\InformationServer\Server\Projects\demo_geetha\RT_BP29.O\V0S1_routine_test_Transformer_1.C(316) : warning C4244: '=' : conversion from 'APT_Int64' to 'int', possible loss of data

##I IIS-DSEE-TBLD-00079 12:01:44(004) <transform> Error when checking composite operator: cxx -LC:/IBM/InformationServer/Server/Projects/demo_geetha/RT_BP29.O/ -LC:/IBM/InformationServer/Server/PXEngine/lib -LC:/IBM/InformationServer/Server/PXEngine/user_lib -s -W/dll -W/base:0x50000000 -lliborchnt -lliborchcorent -lliborchbuildopnt D:/geetha/mike.obj.o C:/IBM/InformationServer/Server/Projects/demo_geetha/RT_BP29.O/V0S1_routine_test_Transformer_1.tmp.o -o C:/IBM/InformationServer/Server/Projects/demo_geetha/RT_BP29.O/V0S1_routine_test_Transformer_1.dll.
##I IIS-DSEE-TBLD-00000 12:01:44(005) <main_program> Error when checking composite operator: Output from subprocess: LINK : fatal error LNK1181: cannot open input file 'D:\geetha\mike.obj.o'

##E IIS-DSEE-TCOS-00029 12:01:44(006) <main_program> Creation of a step finished with status = FAILED. (routine_test.Transformer_1)

*** Internal Generated Transformer Code follows:
0001: //
0002: // Generated file to implement the V0S1_routine_test_Transformer_1 transform operator.
0003: //
0004:
0005: // define external functions used
0006: extern uint32 mike(uint32 mike);
0007:
0008: // define our input/output link names
0009: inputname 0 DSLink3;
0010: outputname 0 DSLink4;
0011:
0012: initialize {
0013: // define our row rejected variable
0014: int8 RowRejected0;
0015:
0016: // define our null set variable
0017: int8 NullSetVar0;
0018:
0019: }
0020:
0021: mainloop {
0022: // initialise our row rejected variable
0023: RowRejected0 = 1;
0024:
0025: // declare our intermediate variables for this section
0026: uint32 InterVar0_0;
0027:
0028: // evaluate columns (no constraints) for link: DSLink4
0029: InterVar0_0 = DSLink3.id;
0030: DSLink4.id = mike(InterVar0_0);
0031: writerecord 0;
0032: RowRejected0 = 0;
0033: }
0034:
0035: finish {
0036: }
0037:
*** End of Internal Generated Transformer Code
Top
ray.wurlod
Participant
Posts: 54607
Joined: Wed Oct 23, 2002 10:52 pm
Location: Sydney, Australia
Contact:
Contact ray.wurlod

Post by ray.wurlod »

Please advise how this issue was Resolved
IBM Software Services Group
Any contribution to this forum is my own opinion and does not necessarily reflect any position that IBM may hold.
Top
Geetha_M
Participant
Posts: 13
Joined: Fri Oct 31, 2008 12:12 am

Post by Geetha_M »

when i used the command
cxx -W/TP -W/EHa -DAPT_USE_ANSI_IOSTREAMS -c mike.c
to compile it gave the following error :
NuTCRACKER not properly installed. The pathname:
C:/PROGRA~1/MKSTOO~1/include
is missing from the 'INCLUDE' environment variable.

But when i tried compiling with command CC -O -c mike.c -o mike
the object code mike.obj was generated.
From the IIS designer ->routines ->right click ->new->parallel routines
Icould create the routine .
Top
Post Reply

Return to “IBM<sup>®</sup> DataStage Enterprise Edition (Formerly Parallel Extender/PX)”