Transformerstage error
Posted: Thu Oct 25, 2007 1:20 pm
HI,
when i am running the parallel job by using transformer stage in Datastage 7.5x2 i got this error.
Output from transformer compilation follows:
##I TFCN 000001 15:15:34(000) <main_program>
Ascential DataStage(tm) Enterprise Edition 7.5
Copyright (c) 2004, 1997-2004 Ascential Software Corporation.
All Rights Reserved
##I TOSH 000002 15:15:34(001) <main_program> orchgeneral: loaded
##I TOSH 000002 15:15:34(002) <main_program> orchsort: loaded
##I TOSH 000002 15:15:34(003) <main_program> orchstats: loaded
##E TBLD 000000 15:15:37(000) <main_program> Error when checking composite operator: Subprocess command failed with exit status 256
##E TFSR 000019 15:15:37(001) <main_program> Could not check all operators because of previous error(s)
##W TFCP 000000 15:15:37(002) <transform> Error when checking composite operator: The number of reject datasets "0"is less than the number of input datasets "1".
##W TBLD 000000 15:15:37(003) <main_program> Error when checking composite operator: Output from subprocess: cxx: file 'F:/PROGRA~1/MKSTOO~1/etc/cxx.ccg': The system cannot find the file specified.
##I TFCP 000008 15:15:37(004) <transform> Error when checking composite operator: cxx -W/TP -W/EHa -DAPT_USE_ANSI_IOSTREAMS -c -O -IF:/PXEngine/include f:/Projects/Sai/RT_BP437.O/V0S7_modify_Transformer_7.C -o f:/Projects/Sai/RT_BP437.O/V0S7_modify_Transformer_7.tmp.o
##E TCOS 000029 15:15:37(005) <main_program> Creation of step finished with status = FAILED (modify.Transformer_7)
*** Internal Generated Transformer Code follows:
0001: //
0002: // Generated file to implement the V0S7_repos_Transformer_7 transform operator.
0003: //
0004:
0005: // define our input/output link names
0006: inputname 0 DSLink3;
0007: outputname 0 DSLink4;
0008:
0009: initialize {
0010: // define our row rejected variable
0011: int8 RowRejected0;
0012:
0013: // define our null set variable
0014: int8 NullSetVar0;
0015:
0016: }
0017:
0018: mainloop {
0019: // initialise our row rejected variable
0020: RowRejected0 = 1;
0021:
0022: // evaluate columns (no constraints) for link: DSLink4
0023: writerecord 0;
0024: RowRejected0 = 0;
0025: }
0026:
0027: finish {
0028: }
0029:
*** End of Internal Generated Transformer Code
Could you please advice me on this regard?
Thanks & regards
Sasi
when i am running the parallel job by using transformer stage in Datastage 7.5x2 i got this error.
Output from transformer compilation follows:
##I TFCN 000001 15:15:34(000) <main_program>
Ascential DataStage(tm) Enterprise Edition 7.5
Copyright (c) 2004, 1997-2004 Ascential Software Corporation.
All Rights Reserved
##I TOSH 000002 15:15:34(001) <main_program> orchgeneral: loaded
##I TOSH 000002 15:15:34(002) <main_program> orchsort: loaded
##I TOSH 000002 15:15:34(003) <main_program> orchstats: loaded
##E TBLD 000000 15:15:37(000) <main_program> Error when checking composite operator: Subprocess command failed with exit status 256
##E TFSR 000019 15:15:37(001) <main_program> Could not check all operators because of previous error(s)
##W TFCP 000000 15:15:37(002) <transform> Error when checking composite operator: The number of reject datasets "0"is less than the number of input datasets "1".
##W TBLD 000000 15:15:37(003) <main_program> Error when checking composite operator: Output from subprocess: cxx: file 'F:/PROGRA~1/MKSTOO~1/etc/cxx.ccg': The system cannot find the file specified.
##I TFCP 000008 15:15:37(004) <transform> Error when checking composite operator: cxx -W/TP -W/EHa -DAPT_USE_ANSI_IOSTREAMS -c -O -IF:/PXEngine/include f:/Projects/Sai/RT_BP437.O/V0S7_modify_Transformer_7.C -o f:/Projects/Sai/RT_BP437.O/V0S7_modify_Transformer_7.tmp.o
##E TCOS 000029 15:15:37(005) <main_program> Creation of step finished with status = FAILED (modify.Transformer_7)
*** Internal Generated Transformer Code follows:
0001: //
0002: // Generated file to implement the V0S7_repos_Transformer_7 transform operator.
0003: //
0004:
0005: // define our input/output link names
0006: inputname 0 DSLink3;
0007: outputname 0 DSLink4;
0008:
0009: initialize {
0010: // define our row rejected variable
0011: int8 RowRejected0;
0012:
0013: // define our null set variable
0014: int8 NullSetVar0;
0015:
0016: }
0017:
0018: mainloop {
0019: // initialise our row rejected variable
0020: RowRejected0 = 1;
0021:
0022: // evaluate columns (no constraints) for link: DSLink4
0023: writerecord 0;
0024: RowRejected0 = 0;
0025: }
0026:
0027: finish {
0028: }
0029:
*** End of Internal Generated Transformer Code
Could you please advice me on this regard?
Thanks & regards
Sasi