Problem with the installation
Posted: Mon Jul 03, 2006 6:52 am
Hi,
Installing px on Windows XP service pack 2
I am having problem with the installation.
##I TFCN 000001 17:27:08(000) <main_program>
Ascential DataStage(tm) Enterprise Edition 7.5
Copyright (c) 2004, 1997-2004 Ascential Software Corporation.
All Rights Reserved
##I TOSH 000002 17:27:08(001) <main_program> orchgeneral: loaded
##I TOSH 000002 17:27:08(002) <main_program> orchsort: loaded
##I TOSH 000002 17:27:08(003) <main_program> orchstats: loaded
##W TCOS 000049 17:27:08(004) <main_program> Parameter specified but not used in
flow: DSProjectMapName
##I TFSC 000001 17:27:08(009) <main_program> APT configuration file:
C:/Ascential/DataStage/Configurations/default.apt
Toolkit\mksnt\sh.exe: Toolkit\mksnt\sh.exe: not found
>##E TFPM 000152 17:27:38(000) <main_program> Accept timed out retries = 4
>##E TFPM 000153 17:27:38(001) <main_program> The section leader on HSTTD027
died
>##E TFPM 000356 17:27:38(002) <main_program>
>
>**** Parallel startup failed ****
>
>This is usually due to a configuration error, such as
>not having the Orchestrate install directory properly
>mounted on all nodes, rsh permissions not correctly
>set (via /etc/hosts.equiv or .rhosts), or running from
>a directory that is not mounted on all nodes. Look for
>error messages in the preceding output.
>
>
##I TFPM 000177 17:27:38(003) <main_program> Step started on node HSTTD027; it
uses 1 nodes.
The program running the step is /C=/Ascential/DataStage/PXEngine/bin/osh.exe.
##I TFPM 000178 17:27:38(004) <main_program> The ORCHESTRATE startup program in
/C=/Ascential/DataStage/PXEngine/etc/standalone.sh is being used.
##I TFPM 000181 17:27:38(005) <main_program> A startup script is not being used.
##I TFPM 000183 17:27:39(000) <main_program> The TCP port being used for startup
is 10000; the associated socket number is 3.
##I TFPM 000184 17:27:39(001) <main_program>
Node status:
##I TFPM 000185 17:27:39(002) <main_program> HSTTD027 -
##I TFPM 000187 17:27:39(003) <main_program> rsh issued, no response received
>##E TFPM 000247 17:27:39(004) <main_program> Unable to contact one or more
Section Leaders.
>Probable configuration problem; contact Orchestrate system administrator.
>
>##E TFSR 000011 17:27:39(005) <main_program> Step execution finished with
status = FAILED.
##I TCOS 000026 17:27:39(006) <main_program> Startup Time 0:30 Production Run
Time 0:00
Kindly give some inputs on solving this.
Regards,
Prabu
Installing px on Windows XP service pack 2
I am having problem with the installation.
##I TFCN 000001 17:27:08(000) <main_program>
Ascential DataStage(tm) Enterprise Edition 7.5
Copyright (c) 2004, 1997-2004 Ascential Software Corporation.
All Rights Reserved
##I TOSH 000002 17:27:08(001) <main_program> orchgeneral: loaded
##I TOSH 000002 17:27:08(002) <main_program> orchsort: loaded
##I TOSH 000002 17:27:08(003) <main_program> orchstats: loaded
##W TCOS 000049 17:27:08(004) <main_program> Parameter specified but not used in
flow: DSProjectMapName
##I TFSC 000001 17:27:08(009) <main_program> APT configuration file:
C:/Ascential/DataStage/Configurations/default.apt
Toolkit\mksnt\sh.exe: Toolkit\mksnt\sh.exe: not found
>##E TFPM 000152 17:27:38(000) <main_program> Accept timed out retries = 4
>##E TFPM 000153 17:27:38(001) <main_program> The section leader on HSTTD027
died
>##E TFPM 000356 17:27:38(002) <main_program>
>
>**** Parallel startup failed ****
>
>This is usually due to a configuration error, such as
>not having the Orchestrate install directory properly
>mounted on all nodes, rsh permissions not correctly
>set (via /etc/hosts.equiv or .rhosts), or running from
>a directory that is not mounted on all nodes. Look for
>error messages in the preceding output.
>
>
##I TFPM 000177 17:27:38(003) <main_program> Step started on node HSTTD027; it
uses 1 nodes.
The program running the step is /C=/Ascential/DataStage/PXEngine/bin/osh.exe.
##I TFPM 000178 17:27:38(004) <main_program> The ORCHESTRATE startup program in
/C=/Ascential/DataStage/PXEngine/etc/standalone.sh is being used.
##I TFPM 000181 17:27:38(005) <main_program> A startup script is not being used.
##I TFPM 000183 17:27:39(000) <main_program> The TCP port being used for startup
is 10000; the associated socket number is 3.
##I TFPM 000184 17:27:39(001) <main_program>
Node status:
##I TFPM 000185 17:27:39(002) <main_program> HSTTD027 -
##I TFPM 000187 17:27:39(003) <main_program> rsh issued, no response received
>##E TFPM 000247 17:27:39(004) <main_program> Unable to contact one or more
Section Leaders.
>Probable configuration problem; contact Orchestrate system administrator.
>
>##E TFSR 000011 17:27:39(005) <main_program> Step execution finished with
status = FAILED.
##I TCOS 000026 17:27:39(006) <main_program> Startup Time 0:30 Production Run
Time 0:00
Kindly give some inputs on solving this.
Regards,
Prabu