.rhost file location
Moderators: chulett, rschirm, roy
-
- Premium Member
- Posts: 729
- Joined: Tue Apr 28, 2009 10:49 pm
.rhost file location
Hi All,
I have installed datastage 7.5x2 on windows 7 ultimate OS. I have desig
ned my first job as below.
seqfile ---> filter ---> seqfile
when i click 'view data' in sequential file....i am getting the below error message.
------------------------------------------------------------------------------
##I TOSH 000002 23:58:03(001) <main_program> orchgeneral: loaded
##I TOSH 000002 23:58:03(002) <main_program> orchsort: loaded
##I TOSH 000002 23:58:03(003) <main_program> orchstats: loaded
##W TCOS 000049 23:58:03(004) <main_program> Parameter specified but not used in flow: DSProjectMapName
##I TFSC 000001 23:58:03(009) <main_program> APT configuration file: C:/Ascential/DataStage/Configurations/default.apt
>##E TFPM 000050 23:58:04(000) <main_program> APT_PMListenerPort: socket call failed, errno = 13
>##E TFPM 000151 23:58:04(001) <main_program> APT_PMConnectionRecord::start: unable to create connection port
>##E TFPM 000356 23:58:04(002) <main_program>
>
>**** Parallel startup failed ****
>
>This is usually due to a configuration error, such as
>not having the Orchestrate install directory properly
>mounted on all nodes, rsh permissions not correctly
>set (via /etc/hosts.equiv or .rhosts), or running from
>a directory that is not mounted on all nodes. Look for
>error messages in the preceding output.
>
>
##I TFPM 000177 23:58:04(003) <main_program> Step started on node ; it uses 1 nodes.
The program running the step is /C=/Ascential/DataStage/PXEngine/bin/osh.exe.
##I TFPM 000178 23:58:04(004) <main_program> The ORCHESTRATE startup program in /C=/Ascential/DataStage/PXEngine/etc/standalone.sh is being used.
##I TFPM 000181 23:58:04(005) <main_program> A startup script is not being used.
##I TFPM 000183 23:58:04(006) <main_program> The TCP port being used for startup is 1919967086; the associated socket number is 95067240.
##I TFPM 000184 23:58:04(007) <main_program>
Node status:
##I TFPM 000185 23:58:04(008) <main_program> karthigana-PC -
##I TFPM 000191 23:58:04(009) <main_program> unanticipated failure; please save output and contact Ascential Software.
>##E TFPM 000247 23:58:04(010) <main_program> Unable to contact one or more Section Leaders.
>Probable configuration problem; contact Orchestrate system administrator.
>
>##E TFSR 000011 23:58:04(011) <main_program> Step execution finished with status = FAILED.
##I TCOS 000026 23:58:04(012) <main_program> Startup Time 0:00 Production Run Time 0:00
-------------------------------------------------------------------------------------------
I have read lot of posts about this error message. it seems like .rhosts file should exists in the datastage directory. But i am unable to find that file
anywhere under datastage directory. if it doesn't exists...
Do we need to create that file?
what is the content that i need to include in .rhosts file?
Note: I just checked the configuration file by using tools --> configuration. i got the same above error message.
I have installed datastage 7.5x2 on windows 7 ultimate OS. I have desig
ned my first job as below.
seqfile ---> filter ---> seqfile
when i click 'view data' in sequential file....i am getting the below error message.
------------------------------------------------------------------------------
##I TOSH 000002 23:58:03(001) <main_program> orchgeneral: loaded
##I TOSH 000002 23:58:03(002) <main_program> orchsort: loaded
##I TOSH 000002 23:58:03(003) <main_program> orchstats: loaded
##W TCOS 000049 23:58:03(004) <main_program> Parameter specified but not used in flow: DSProjectMapName
##I TFSC 000001 23:58:03(009) <main_program> APT configuration file: C:/Ascential/DataStage/Configurations/default.apt
>##E TFPM 000050 23:58:04(000) <main_program> APT_PMListenerPort: socket call failed, errno = 13
>##E TFPM 000151 23:58:04(001) <main_program> APT_PMConnectionRecord::start: unable to create connection port
>##E TFPM 000356 23:58:04(002) <main_program>
>
>**** Parallel startup failed ****
>
>This is usually due to a configuration error, such as
>not having the Orchestrate install directory properly
>mounted on all nodes, rsh permissions not correctly
>set (via /etc/hosts.equiv or .rhosts), or running from
>a directory that is not mounted on all nodes. Look for
>error messages in the preceding output.
>
>
##I TFPM 000177 23:58:04(003) <main_program> Step started on node ; it uses 1 nodes.
The program running the step is /C=/Ascential/DataStage/PXEngine/bin/osh.exe.
##I TFPM 000178 23:58:04(004) <main_program> The ORCHESTRATE startup program in /C=/Ascential/DataStage/PXEngine/etc/standalone.sh is being used.
##I TFPM 000181 23:58:04(005) <main_program> A startup script is not being used.
##I TFPM 000183 23:58:04(006) <main_program> The TCP port being used for startup is 1919967086; the associated socket number is 95067240.
##I TFPM 000184 23:58:04(007) <main_program>
Node status:
##I TFPM 000185 23:58:04(008) <main_program> karthigana-PC -
##I TFPM 000191 23:58:04(009) <main_program> unanticipated failure; please save output and contact Ascential Software.
>##E TFPM 000247 23:58:04(010) <main_program> Unable to contact one or more Section Leaders.
>Probable configuration problem; contact Orchestrate system administrator.
>
>##E TFSR 000011 23:58:04(011) <main_program> Step execution finished with status = FAILED.
##I TCOS 000026 23:58:04(012) <main_program> Startup Time 0:00 Production Run Time 0:00
-------------------------------------------------------------------------------------------
I have read lot of posts about this error message. it seems like .rhosts file should exists in the datastage directory. But i am unable to find that file
anywhere under datastage directory. if it doesn't exists...
Do we need to create that file?
what is the content that i need to include in .rhosts file?
Note: I just checked the configuration file by using tools --> configuration. i got the same above error message.
Last edited by karthi_gana on Fri Jun 01, 2012 9:18 pm, edited 1 time in total.
Karthik
-
- Premium Member
- Posts: 729
- Joined: Tue Apr 28, 2009 10:49 pm
Re: .rhost file location
my configuration file content is as below.
Code: Select all
{
node "node1"
{
fastname "karthigana-PC"
pools ""
resource disk "C:/Ascential/DataStage/Datasets" { pools "" }
resource scratchdisk "C:/Ascential/DataStage/Scratch" { pools "" }
}
node "node2"
{
fastname "karthigana-PC"
pools ""
resource disk "C:/Ascential/DataStage/Datasets" { pools "" }
resource scratchdisk "C:/Ascential/DataStage/Scratch" { pools "" }
}
}
Karthik
Re: .rhost file location
I'm not sure how far you are going to get past this:
That version is ancient and specifically architected to run on XP.karthi_gana wrote:I have installed datastage 7.5x2 on windows 7 ultimate OS.
-craig
"You can never have too many knives" -- Logan Nine Fingers
"You can never have too many knives" -- Logan Nine Fingers
-
- Premium Member
- Posts: 729
- Joined: Tue Apr 28, 2009 10:49 pm
Re: .rhost file location
umm...okay...let me try to install microsoft virtual pc and then install windows xp and then datastage on xp.
my laptop config is
inspiron
i5 processor
4 gb ram
my laptop config is
inspiron
i5 processor
4 gb ram
Karthik
-
- Premium Member
- Posts: 729
- Joined: Tue Apr 28, 2009 10:49 pm
Re: .rhost file location
do you mean it is not possible to resolve this issue in windows 7 ? or is it resolvable one?
can you tell me where the .rhosts file will be located by default?
can you tell me where the .rhosts file will be located by default?
Karthik
-
- Premium Member
- Posts: 729
- Joined: Tue Apr 28, 2009 10:49 pm
Re: .rhost file location
i have installed virtual box and installed windows xp sp3. when i try to install datastage now, i am getting the below error message.
"The MKSToolKit component install failed".
I have searched the answer here and came to know that i have to delete c:\programfiles\MKStoolKit folder as well the entries from the below registry.
HKEY_LOCAL_MACHINE/SOFTWARE/Mortice Kens Software key
The things is,
a) I don't see any entry or such name in the registry
b) I don't see MKSToolKit folder under c:\programfiles.
so i think i no need to remove this from my computer.
As far as i know datastage will also try to install MKSToolKit. If we have already installed in our local machine, there may be some incompatabile issue. This is what i read in the "Release Notes". In my case, it is different. Yes, i don't have MKSToolKit installed (checked the installed tools under "Control Panel", registry & folder). But i don't know why i am getting this error message.
my laptop is 32 bit with windows xp, sp 3 installed on virtual box and allocated 2 GB RAM AND 20 GB Hard disk space.
"The MKSToolKit component install failed".
I have searched the answer here and came to know that i have to delete c:\programfiles\MKStoolKit folder as well the entries from the below registry.
HKEY_LOCAL_MACHINE/SOFTWARE/Mortice Kens Software key
The things is,
a) I don't see any entry or such name in the registry
b) I don't see MKSToolKit folder under c:\programfiles.
so i think i no need to remove this from my computer.
As far as i know datastage will also try to install MKSToolKit. If we have already installed in our local machine, there may be some incompatabile issue. This is what i read in the "Release Notes". In my case, it is different. Yes, i don't have MKSToolKit installed (checked the installed tools under "Control Panel", registry & folder). But i don't know why i am getting this error message.
my laptop is 32 bit with windows xp, sp 3 installed on virtual box and allocated 2 GB RAM AND 20 GB Hard disk space.
Karthik
-
- Premium Member
- Posts: 729
- Joined: Tue Apr 28, 2009 10:49 pm
-
- Premium Member
- Posts: 729
- Joined: Tue Apr 28, 2009 10:49 pm
No clue, never played with that ancient verson and because it is so old I doubt there is any level of official support for it. Give whatever you think might help work around the issue a shot and let us know the result. However, I do not believe you can simply 'download' a copy of MKSToolkit, at least not legally... unless perhaps you can find a version on the IBM website.
-craig
"You can never have too many knives" -- Logan Nine Fingers
"You can never have too many knives" -- Logan Nine Fingers
-
- Premium Member
- Posts: 729
- Joined: Tue Apr 28, 2009 10:49 pm
-
- Premium Member
- Posts: 729
- Joined: Tue Apr 28, 2009 10:49 pm
I just went back and designed a server job in windows 7. it works fine.
But when i run the parallel job on windows 7 os i am getting the below error message.
APT_COMPILER = cxx
APT_LINKER = cxx
APT_LINKOPT = -W/TP -W/dll -W/base:0x50000000
is there any changes need to be done above?
PATH environment variable is empty in datastage administrator. Do I need to enter anything ?
what is the use of PATH ?
But when i run the parallel job on windows 7 os i am getting the below error message.
APT_COMPILEROPT = -W/TP -W/EHa -DAPT_USE_ANSI_IOSTREAMS -cmain_program: Internal Error: (socket_ != -1): errlog\errorconfig.C: 1024
APT_COMPILER = cxx
APT_LINKER = cxx
APT_LINKOPT = -W/TP -W/dll -W/base:0x50000000
is there any changes need to be done above?
PATH environment variable is empty in datastage administrator. Do I need to enter anything ?
what is the use of PATH ?
Karthik
-
- Premium Member
- Posts: 1735
- Joined: Thu Mar 01, 2007 5:44 am
- Location: Troy, MI
Re: .rhost file location
I do not think it was architected for XP. XP is for client but the server has to be Windows Server 2003, I think.chulett wrote:I'm not sure how far you are going to get past this:
That version is ancient and specifically architected to run on XP.karthi_gana wrote:I have installed datastage 7.5x2 on windows 7 ultimate OS.
Priyadarshi Kunal
Genius may have its limitations, but stupidity is not thus handicapped.![Wink :wink:](./images/smilies/icon_wink.gif)
Genius may have its limitations, but stupidity is not thus handicapped.
![Wink :wink:](./images/smilies/icon_wink.gif)