SEQUENTIAL FILE STAGE - GETTING STUCK :-(
Moderators: chulett, rschirm, roy
-
- Participant
- Posts: 23
- Joined: Wed Jan 18, 2006 10:43 am
SEQUENTIAL FILE STAGE - GETTING STUCK :-(
Hi all,
We are using DS Parallel 7.5.1.A
when i create a new job with a SEQUENTIAL FILE STAGE or even try to open an existing job - all other stages are working fine - but when i double click the Seq file stage - the whole Designer jus hangs - it doesnt even open...(and i've to kill it thru Windows Task manager)
When i tried doing the same thing as a Server job - it works fine...but i need to work on a Parallel job...
[the new job doesnt even contain data - it hangs at the starting step only - only seq file stage --> transformer, when i try to open seq file stage for even giving the file name - it doesn't open - It JUST HANGS!!!)
this happened last week - when we tried to re-install the client - we did everything (cleaning registry keys and installing it again)...but didnt work, at last one of our IT helpdesk person re-created my Windows profile (of my machine) and I re-installed the client - it started working...but alas...only for a week, again since today mrng - the same issue is being repeated.
Has anyone seen this before? Is it something to do with my System files? or the Designer??? This is happening only in my Parallel jobs....
And a very imp point...when i try to open my jobs on my colleague's m/c with my own id - im able to access that stage - but when i try to do it on my m/c with my id as well as my colleague's id - all other stages, manager,director everything work....except just this SEQUENTIAL FILE STAGE.....(already checked out the files and profiled thru Dependency Walker for both mine and my colleague's m/cs)
Please let me know, if i need to change somefiles or something...Because of this i'm not able to do any of my work (all my jobs - have atleast one sequential file stage )
thank u so much...
Usha
We are using DS Parallel 7.5.1.A
when i create a new job with a SEQUENTIAL FILE STAGE or even try to open an existing job - all other stages are working fine - but when i double click the Seq file stage - the whole Designer jus hangs - it doesnt even open...(and i've to kill it thru Windows Task manager)
When i tried doing the same thing as a Server job - it works fine...but i need to work on a Parallel job...
[the new job doesnt even contain data - it hangs at the starting step only - only seq file stage --> transformer, when i try to open seq file stage for even giving the file name - it doesn't open - It JUST HANGS!!!)
this happened last week - when we tried to re-install the client - we did everything (cleaning registry keys and installing it again)...but didnt work, at last one of our IT helpdesk person re-created my Windows profile (of my machine) and I re-installed the client - it started working...but alas...only for a week, again since today mrng - the same issue is being repeated.
Has anyone seen this before? Is it something to do with my System files? or the Designer??? This is happening only in my Parallel jobs....
And a very imp point...when i try to open my jobs on my colleague's m/c with my own id - im able to access that stage - but when i try to do it on my m/c with my id as well as my colleague's id - all other stages, manager,director everything work....except just this SEQUENTIAL FILE STAGE.....(already checked out the files and profiled thru Dependency Walker for both mine and my colleague's m/cs)
Please let me know, if i need to change somefiles or something...Because of this i'm not able to do any of my work (all my jobs - have atleast one sequential file stage )
thank u so much...
Usha
-
- Participant
- Posts: 23
- Joined: Wed Jan 18, 2006 10:43 am
Usha, the problem is odd from your explanation; meaning that even though you have reinstalled DS on your workstation the error persists. Did you actually un-install your software and then re-install it or just overwrite the existing installation - if the latter then try a clean install by deleting the old version first.
Also, do you have the deadlock daemon running on your engine and if not, get it running just to be on the safe side. If this is a lightly used server then one suggestion is to stop and start DataStage if your deadlock daemon is not running - you might conceivably have some errant lock set in your engine which is causing your process to hang.
You can get your workstation to hang and then identify the associated unix process (this would be a dsapi_slave with your userid) and try doing a "truss -p {pid}" on it and seeing if you can identify any system calls. If you see something like "_select" in there you probably do have a lock.
I have left this post as a visible one, but remember that as a non-charter member you would normally not see responses like this one.
Is this problem only happening to your user id or at anyone logging into your workstation then you should re-install your client.
Also, do you have the deadlock daemon running on your engine and if not, get it running just to be on the safe side. If this is a lightly used server then one suggestion is to stop and start DataStage if your deadlock daemon is not running - you might conceivably have some errant lock set in your engine which is causing your process to hang.
You can get your workstation to hang and then identify the associated unix process (this would be a dsapi_slave with your userid) and try doing a "truss -p {pid}" on it and seeing if you can identify any system calls. If you see something like "_select" in there you probably do have a lock.
I have left this post as a visible one, but remember that as a non-charter member you would normally not see responses like this one.
Is this problem only happening to your user id or at anyone logging into your workstation then you should re-install your client.
<a href=http://www.worldcommunitygrid.org/team/ ... TZ9H4CGVP1 target="WCGWin">
</a>
</a>
-
- Participant
- Posts: 23
- Joined: Wed Jan 18, 2006 10:43 am
Yes ArndW....
i uninstalled the client - removed all registry keys...in Sys
and again re-installed it...
but nothing worked....
We've opened a ticket with IBM last week when this first happened - they also suggested the same thing, and walked over all the steps - and i did everything for 2days - but when nothing got fixed - as i told u - one of our IT help desk re-created my windows profile and as usual we re-installed the client again, then it started working normally, and now again this problem started since today mrng....
Since 2months ive been using the same system and Designer - everything worked fine....
i uninstalled the client - removed all registry keys...in Sys
and again re-installed it...
but nothing worked....
We've opened a ticket with IBM last week when this first happened - they also suggested the same thing, and walked over all the steps - and i did everything for 2days - but when nothing got fixed - as i told u - one of our IT help desk re-created my windows profile and as usual we re-installed the client again, then it started working normally, and now again this problem started since today mrng....
Since 2months ive been using the same system and Designer - everything worked fine....
I had something similar happen with my workstation and it turned out that the automatic software update package had kicked in overnight and installed some package which had messed up my libraries on my PC. Please post your answers once you get them sorted out so that others can benefit from your pains.
<a href=http://www.worldcommunitygrid.org/team/ ... TZ9H4CGVP1 target="WCGWin">
</a>
</a>
-
- Participant
- Posts: 23
- Joined: Wed Jan 18, 2006 10:43 am
-
- Participant
- Posts: 54607
- Joined: Wed Oct 23, 2002 10:52 pm
- Location: Sydney, Australia
- Contact:
Is that patch unique to 7.5.1A or does 7.5.2 need it as well? Some of our clients are on W2000 and some are on XP. My machine is on XP SP1, but I would not be surprised if we get bumped up to SP2 in the near future. If 7.5.2 als has this issue, I need to warn our Infrastructure and Network groups prior to the upgrade.
Thanks for the info!
Brad.
Thanks for the info!
Brad.