Send mail with notification stage error

ArndW · Post by **ArndW** » Thu Aug 23, 2012 1:01 am

Hello Christian,

I think that you can take DataStage out of the equation, at least temporarily.

from your command line in a shell, try to execute

Code: Select all

/usr/lib/sendmail -t -v -i <<//// 
Server: 192.168.1.13 
From: procesos_dwh@pronaca.com 
To: cceron@softconsulting.com.ec 
Subject: Prueba 

Hola esto es una prueba 
////

and you will most likely get the same mailer error. The 550-error tells me that your mailer-daemon isn't configured correctly and that mails can't be forwarded.

What is the contents of your "/etc/mail/sendmail.mc" file?

ArndW · Post by **ArndW** » Mon Aug 27, 2012 9:05 am

I assume that "srvpprodinfsrv.pronaca.com" is the datastage server, correct?
That tells me that the sendmail doesn't have a correct address to the smtp gateway/server for mail.

Can you post the "/etc/sendmail.cf" contents?

chulett · Post by **chulett** » Mon Aug 27, 2012 9:24 am

For UNIX and the Notification Activity stage, just leave the 'server' property empty.

gccc_ceron · Post by **gccc_ceron** » Mon Aug 27, 2012 12:02 pm

This is my sendmail.cf file:

# @(#)24 1.75 src/bos/usr/sbin/sendmail/sendmail.cf, cmdsend, bos61Q, 1050A_61Q 11/25/10 03:46:13
# IBM_PROLOG_BEGIN_TAG
# This is an automatically generated prolog.
#
# bos61Q src/bos/usr/sbin/sendmail/sendmail.cf 1.75
#
# Licensed Materials - Property of IBM
#
# COPYRIGHT International Business Machines Corp. 1985,2010
# All Rights Reserved
#
# US Government Users Restricted Rights - Use, duplication or
# disclosure restricted by GSA ADP Schedule Contract with IBM Corp.
#
# IBM_PROLOG_END_TAG
#
#
# COMPONENT_NAME: CMDSEND sendmail.cf
#
# FUNCTIONS:
#
# ORIGINS: 26 27 220
#
# Copyright (c) 1998-2004, 2009 Sendmail, Inc. and its suppliers.
# All rights reserved.
# Copyright (c) 1983, 1995 Eric P. Allman. All rights reserved.
# Copyright (c) 1988, 1993
# The Regents of the University of California. All rights reserved.
#
# By using this file, you agree to the terms and conditions set
# forth in the LICENSE file which can be found at the top level of
# the sendmail distribution.
#
#

######################################################################
######################################################################
#####
##### SENDMAIL CONFIGURATION FILE
#####
######################################################################
######################################################################

##### $Id: cfhead.m4,v 8.120 2009/01/23 22:39:21 ca Exp $ #####
##### $Id: cf.m4,v 8.32 1999/02/07 07:26:14 gshapiro Exp $ #####

##### $Id: aix5.m4,v 1.1 2000/12/08 21:53:36 ca Exp $ #####

##### $Id: generic.m4,v 8.15 1999/04/04 00:51:09 ca Exp $ #####

##### $Id: redirect.m4,v 8.15 1999/08/06 01:47:36 gshapiro Exp $ #####

##### $Id: use_cw_file.m4,v 8.11 2001/08/26 20:58:57 gshapiro Exp $ #####

##### $Id: genericstable.m4,v 8.23 2002/06/27 23:23:57 gshapiro Exp $ #####

##### $Id: mailertable.m4,v 8.25 2002/06/27 23:23:57 gshapiro Exp $ #####

##### $Id: virtusertable.m4,v 8.23 2002/06/27 23:23:57 gshapiro Exp $ #####

##### $Id: domaintable.m4,v 8.24 2002/06/27 23:23:57 gshapiro Exp $ #####

##### $Id: allmasquerade.m4,v 8.13 2000/09/12 22:00:53 ca Exp $ #####

##### $Id: no_default_msa.m4,v 8.2 2001/02/14 05:03:22 gshapiro Exp $ #####

##### $Id: proto.m4,v 8.741 2009/12/11 00:04:53 ca Exp $ #####

# level 10 config file format
V10/Berkeley

# override file safeties - setting this option compromises system security,
# addressing the actual file configuration problem is preferred
# need to set this before any file actions are encountered in the cf file
#O DontBlameSendmail=safe

# default LDAP map specification
# need to set this now before any LDAP maps are defined
#O LDAPDefaultSpec=-h localhost

##################
# local info #
##################

# my LDAP cluster
# need to set this before any LDAP lookups are done (including classes)
#D{sendmailMTACluster}$m

Cwlocalhost
# file containing names of hosts for which we receive email
# Fw/etc/mail/local-host-names

# my official domain name
# ... define this only if sendmail cannot automatically determine your domain
#Dj$w.Foo.COM

# host/domain names ending with a token in class P are canonical
CP.

# UUCP relay host
#DYrelayhostname
#CPUUCP

# "Smart" relay host (may be null)
DS

# operators that cannot be in local usernames (i.e., network indicators)
CO @ % !

# a class with just dot (for identifying canonical names)
C..

# a class with just a left bracket (for identifying domain literals)
C[[

# Resolve map (to check if a host exists in check_mail)
Kresolve host -a<OKR> -T<TEMP>
C{ResOk}OKR

# Hosts for which relaying is permitted ($=R)
# FR-o /etc/mail/relay-domains

# arithmetic map
Karith arith

# who I send unqualified names to (null means deliver locally)
DR

# who gets all local email traffic ($R has precedence for unqualified names)
DH

# dequoting map
Kdequote dequote

# class E: names that should be exposed as from this host, even if we masquerade
# class L: names that should be delivered locally, even if we have a relay
# class M: domains that should be converted to $M
# class N: domains that should not be converted to $M
#CL root
C{E}root

# who I masquerade as (null for no masquerading) (see also $=M)
DM

# my name for error messages
DnMAILER-DAEMON

CPREDIRECT

# Generics table (mapping outgoing addresses)
#Kgenerics hash /etc/mail/genericstable

# Mailer table (overriding domains)
#Kmailertable hash /etc/mail/mailertable

# Virtual user table (maps incoming users)
#Kvirtuser hash /etc/mail/virtusertable

# Domain table (adding domains)
#Kdomaintable hash /etc/mail/domaintable

# Configuration version number
DZ8.14.4

###############
# Options #
###############

# strip message body to 7 bits on input?
O SevenBitInput=False

# 8-bit data handling
O EightBitMode=pass8

# wait for alias file rebuild (default units: minutes)
O AliasWait=10

# location of alias file
O AliasFile=/etc/mail/aliases

# minimum number of free blocks on filesystem
O MinFreeBlocks=100

# maximum message size
#O MaxMessageSize=1000000

# substitution for space (blank) characters
O BlankSub=.

# avoid connecting to "expensive" mailers on initial submission?
O HoldExpensive=False

# checkpoint queue runs after every N successful deliveries
#O CheckpointInterval=10

# default delivery mode
O DeliveryMode=background

# error message header/file
#O ErrorHeader=/etc/mail/error-header

# error mode
#O ErrorMode=print

# save Unix-style "From_" lines at top of header?
#O SaveFromLine=False

# queue file mode (qf files)
#O QueueFileMode=0600

# temporary file mode
O TempFileMode=0600

# match recipients against GECOS field?
#O MatchGECOS=False

# maximum hop count
#O MaxHopCount=17

# location of help file
# Note: This option is not supported in AIX. All help commands
# are coded into the sendmail program.
O HelpFile=/etc/mail/helpfile

# ignore dots as terminators in incoming messages?
#O IgnoreDots=False

# name resolver options
#O ResolverOptions=+AAONLY

# deliver MIME-encapsulated error messages?
O SendMimeErrors=True

# Forward file search path
O ForwardPath=$z/.forward.$w+$h:$z/.forward+$h:$z/.forward.$w:$z/.forward

# open connection cache size
O ConnectionCacheSize=2

# open connection cache timeout
O ConnectionCacheTimeout=5m

# persistent host status directory
#O HostStatusDirectory=.hoststat

# single thread deliveries (requires HostStatusDirectory)?
#O SingleThreadDelivery=False

# use Errors-To: header?
O UseErrorsTo=False

# log level
O LogLevel=9

# send to me too, even in an alias expansion?
#O MeToo=True

# verify RHS in newaliases?
O CheckAliases=False

# use MB, MG, and MR resource records? (AIX)
#O NameServOpt=False

# default messages to old style headers if no special punctuation?
O OldStyleHeaders=True

# SMTP daemon options
# Name used for error messages and logging
O DaemonPortOptions=Name=MTA

# Sendmail implements RFC 2476 (Message Submission). Turn this on
# to run a Message Submission Agent (MSA)
#O DaemonPortOptions=Port=587, Name=MSA, M=E

# SMTP client options
#O ClientPortOptions=Family=inet, Address=0.0.0.0

# Modifiers to define {daemon_flags} for direct submissions
#O DirectSubmissionModifiers

# Use as mail submission program? See sendmail/SECURITY
#O UseMSP

# privacy flags
O PrivacyOptions=authwarnings

# who (if anyone) should get extra copies of error messages
#O PostmasterCopy=Postmaster

# slope of queue-only function
#O QueueFactor=600000

# limit on number of concurrent queue runners
#O MaxQueueChildren

# maximum number of queue-runners per queue-grouping with multiple queues
#O MaxRunnersPerQueue=1

# priority of queue runners (nice(3))
#O NiceQueueRun

# shall we sort the queue by hostname first?
#O QueueSortOrder=priority

# minimum time in queue before retry
#O MinQueueAge=30m

# how many jobs can you process in the queue?
#O MaxQueueRunSize=0

# perform initial split of envelope without checking MX records
#O FastSplit=1

# queue directory
O QueueDirectory=/var/spool/mqueue

# key for shared memory; 0 to turn off, -1 to auto-select
#O SharedMemoryKey=0

# file to store auto-selected key for shared memory (SharedMemoryKey = -1)
#O SharedMemoryKeyFile

# timeouts (many of these)
#O Timeout.initial=5m
#O Timeout.connect=5m
#O Timeout.aconnect=0s
#O Timeout.iconnect=5m
#O Timeout.helo=5m
#O Timeout.mail=10m
#O Timeout.rcpt=1h
#O Timeout.datainit=5m
#O Timeout.datablock=1h
#O Timeout.datafinal=1h
#O Timeout.rset=5m
#O Timeout.quit=2m
#O Timeout.misc=2m
#O Timeout.command=1h
#O Timeout.ident=5s
#O Timeout.fileopen=60s
#O Timeout.control=2m
O Timeout.queuereturn=5d
#O Timeout.queuereturn.normal=5d
#O Timeout.queuereturn.urgent=2d
#O Timeout.queuereturn.non-urgent=7d
#O Timeout.queuereturn.dsn=5d
O Timeout.queuewarn=4h
#O Timeout.queuewarn.normal=4h
#O Timeout.queuewarn.urgent=1h
#O Timeout.queuewarn.non-urgent=12h
#O Timeout.queuewarn.dsn=4h
#O Timeout.hoststatus=30m
#O Timeout.resolver.retrans=5s
#O Timeout.resolver.retrans.first=5s
#O Timeout.resolver.retrans.normal=5s
#O Timeout.resolver.retry=4
#O Timeout.resolver.retry.first=4
#O Timeout.resolver.retry.normal=4
#O Timeout.lhlo=2m
#O Timeout.auth=10m
#O Timeout.starttls=1h

# time for DeliverBy; extension disabled if less than 0
#O DeliverByMin=0

# should we not prune routes in route-addr syntax addresses?
#O DontPruneRoutes=False

# queue up everything before forking?
O SuperSafe=True

# status file
O StatusFile=/etc/mail/statistics

# time zone handling:
# if undefined, use system default
# if defined but null, use TZ envariable passed in
# if defined and non-null, use that info
O TimeZoneSpec=

# default UID (can be username or userid:groupid)
#O DefaultUser=mailnull

# list of locations of user database file (null means no lookup)
#O UserDatabaseSpec=/etc/mail/userdb

# fallback MX host
#O FallbackMXhost=fall.back.host.net

# fallback smart host
#O FallbackSmartHost=fall.back.host.net

# if we are the best MX host for a site, try it directly instead of config err
#O TryNullMXList=False

# load average at which we just queue messages
#O QueueLA=8

# load average at which we refuse connections
#O RefuseLA=12

# log interval when refusing connections for this long
#O RejectLogInterval=3h

# load average at which we delay connections; 0 means no limit
#O DelayLA=0

# maximum number of children we allow at one time
#O MaxDaemonChildren=12

# maximum number of new connections per second
#O ConnectionRateThrottle=3

# Width of the window
#O ConnectionRateWindowSize=60s

# work recipient factor
#O RecipientFactor=30000

# deliver each queued job in a separate process?
#O ForkEachJob=False

# work class factor
#O ClassFactor=1800

# work time factor
#O RetryFactor=90000

# default character set
#O DefaultCharSet=iso-8859-1

# service switch file (name hardwired on Solaris, Ultrix, OSF/1, others)
# NOTE: This option is also ignored in AIX. AIX uses the
# the /etc/netsvc.conf file.
#O ServiceSwitchFile=/etc/mail/service.switch

# hosts file (normally /etc/hosts)
#O HostsFile=/etc/hosts

# dialup line delay on connection failure
#O DialDelay=0s

# action to take if there are no recipients in the message
#O NoRecipientAction=none

# chrooted environment for writing to files
#O SafeFileEnvironment

# are colons OK in addresses?
#O ColonOkInAddr=True

# how many jobs can you process in the queue?
#O MaxQueueRunSize=0

# shall I avoid expanding CNAMEs (violates protocols)?
#O DontExpandCnames=False

# SMTP initial login message (old $e macro)
O SmtpGreetingMessage=$j Sendmail $b

# UNIX initial From header format (old $l macro)
O UnixFromLine=From $g $d

# From: lines that have embedded newlines are unwrapped onto one line
#O SingleLineFromHeader=False

# Allow HELO SMTP command that does not include a host name
#O AllowBogusHELO=False

# Characters to be quoted in a full name phrase (@,;:\()[] are automatic)
#O MustQuoteChars=.

# delimiter (operator) characters (old $o macro)
O OperatorChars=.:%@!^/[]+

# shall I avoid calling initgroups(3) because of high NIS costs?
#O DontInitGroups=False

# are group-writable :include: and .forward files (un)trustworthy?
# True (the default) means they are not trustworthy.
#O UnsafeGroupWrites=True

# where do errors that occur when sending errors get sent?
#O DoubleBounceAddress=postmaster

# issue temporary errors (4xy) instead of permanent errors (5xy)?
#O SoftBounce=False

# where to save bounces if all else fails
#O DeadLetterDrop=/var/tmp/dead.letter

# what user id do we assume for the majority of the processing?
#O RunAsUser=sendmail

# maximum number of recipients per SMTP envelope
#O MaxRecipientsPerMessage=100
# limit the rate recipients per SMTP envelope are accepted
# once the threshold number of recipients have been rejected
#O BadRcptThrottle=0

# shall we get local names from our installed interfaces?
#O DontProbeInterfaces=False

# Return-Receipt-To: header implies DSN request
#O RrtImpliesDsn=False

# override connection address (for testing)
#O ConnectOnlyTo=0.0.0.0

# Trusted user for file ownership and starting the daemon
#O TrustedUser=root

# Control socket for daemon management
#O ControlSocketName=/var/spool/mqueue/.control

# Maximum MIME header length to protect MUAs
#O MaxMimeHeaderLength=0/0

# Maximum length of the sum of all headers
O MaxHeadersLength=32768

# Maximum depth of alias recursion
#O MaxAliasRecursion=10

# location of pid file
#O PidFile=/var/run/sendmail.pid

# Prefix string for the process title shown on 'ps' listings
#O ProcessTitlePrefix=prefix

# Data file (df) memory-buffer file maximum size
#O DataFileBufferSize=4096

# Transcript file (xf) memory-buffer file maximum size
#O XscriptFileBufferSize=4096

# lookup type to find information about local mailboxes
#O MailboxDatabase=pw

# override compile time flag REQUIRES_DIR_FSYNC
#O RequiresDirfsync=true

# list of authentication mechanisms
#O AuthMechanisms=EXTERNAL GSSAPI KERBEROS_V4 DIGEST-MD5 CRAM-MD5

# Authentication realm
#O AuthRealm

# default authentication information for outgoing connections
#O DefaultAuthInfo=/etc/mail/default-auth-info

# SMTP AUTH flags
#O AuthOptions

# SMTP AUTH maximum encryption strength
#O AuthMaxBits

# SMTP STARTTLS server options
#O TLSSrvOptions

# Input mail filters
#O InputMailFilters

# CA directory
#O CACertPath
# CA file
#O CACertFile
# Server Cert
#O ServerCertFile
# Server private key
#O ServerKeyFile
# Client Cert
#O ClientCertFile
# Client private key
#O ClientKeyFile
# File containing certificate revocation lists
#O CRLFile
# DHParameters (only required if DSA/DH is used)
#O DHParameters
# Random data source (required for systems without /dev/urandom under OpenSSL)
#O RandFile

# Maximum number of "useless" commands before slowing down
#O MaxNOOPCommands=20

# Name to use for EHLO (defaults to $j)
#O HeloName

############################
# QUEUE GROUP DEFINITIONS #
############################
###########################
# Message precedences #
###########################

Pfirst-class=0
Pspecial-delivery=100
Plist=-30
Pbulk=-60
Pjunk=-100

#####################
# Trusted users #
#####################

# this is equivalent to setting class "t"
#Ft/etc/mail/trusted-users
Troot
Tdaemon
Tuucp

#########################
# Format of headers #
#########################

H?P?Return-Path: <$g>
HReceived: $?sfrom $s $.$?_($?s$|from $.$_)
$.$?{auth_type}(authenticated$?{auth_ssf} bits=${auth_ssf}$.)
$.by $j ($v/$Z)$?r with $r$. id $i$?{tls_version}
(version=${tls_version} cipher=${cipher} bits=${cipher_bits} verify=${verify})$.$?u
for $u; $|;
$.$b
H?D?Resent-Date: $a
H?D?Date: $a
H?F?Resent-From: $?x$x <$g>$|$g$.
H?F?From: $?x$x <$g>$|$g$.
H?x?Full-Name: $x
# HPosted-Date: $a
# H?l?Received-Date: $b
H?M?Resent-Message-Id: <$t.$i@$j>
H?M?Message-Id: <$t.$i@$j>

#
######################################################################
######################################################################
#####
##### REWRITING RULES
#####
######################################################################
######################################################################

############################################
### Ruleset 3 -- Name Canonicalization ###
############################################
Scanonify=3

# handle null input (translate to <@> special case)
R$@ $@ <@>

# strip group: syntax (not inside angle brackets!) and trailing semicolon
R$* $: $1 <@> mark addresses
R$* < $* > $* <@> $: $1 < $2 > $3 unmark <addr>
R@ $* <@> $: @ $1 unmark @host:...
R$* [ IPv6 : $+ ] <@> $: $1 [ IPv6 : $2 ] unmark IPv6 addr
R$* :: $* <@> $: $1 :: $2 unmark node::addr
R:include: $* <@> $: :include: $1 unmark :include:...
R$* : $* [ $* ] $: $1 : $2 [ $3 ] <@> remark if leading colon
# Commented out for (AIX)
#R$* : $* <@> $: $2 strip colon if marked
R$* <@> $: $1 unmark
R$* ; $1 strip trailing semi
R$* < $+ :; > $* $@ $2 :; <@> catch <list:;>
R$* < $* ; > $1 < $2 > bogus bracketed semi

# null input now results from list:; syntax
R$@ $@ :; <@>

# strip angle brackets -- note RFC733 heuristic to get innermost item
R$* $: < $1 > housekeeping <>
R$+ < $* > < $2 > strip excess on left
R< $* > $+ < $1 > strip excess on right
R<> $@ < @ > MAIL FROM:<> case
R< $+ > $: $1 remove housekeeping <>

# strip route address <@a,@b,@c:user@d> -> <user@d>
R@ $+ , $+ $2
R@ [ $* ] : $+ $2
R@ $+ : $+ $2

# find focus for list syntax
R $+ : $* ; @ $+ $@ $>Canonify2 $1 : $2 ; < @ $3 > list syntax
R $+ : $* ; $@ $1 : $2; list syntax

# Added for x400 - (AIX)
# detect x400. focus and localize.
R/C=$+@$=w $@/C=$1<@$2.>
R/C=$+ $@</C=$1> x400 route addr

# find focus for @ syntax addresses
R$+ @ $+ $: $1 < @ $2 > focus on domain
R$+ < $+ @ $+ > $1 $2 < @ $3 > move gaze right
R$+ < @ $+ > $@ $>Canonify2 $1 < @ $2 > already canonical

# convert old-style addresses to a domain-based address
R$- ! $+ $@ $>Canonify2 $2 < @ $1 .UUCP > resolve uucp names
R$+ . $- ! $+ $@ $>Canonify2 $3 < @ $1 . $2 > domain uucps
R$+ ! $+ $@ $>Canonify2 $2 < @ $1 .UUCP > uucp subdomains

# Added for (AIX)
# convert node::user addresses into a domain-based address
R$- :: $+ $@ $>96 $2 < @ $1 .DECNET > resolve DECnet names
R$- . $- :: $+ $@ $>96 $3 < @ $1.$2 .DECNET > numeric DECnet addr

# if we have % signs, take the rightmost one
R$* % $* $1 @ $2 First make them all @s.
R$* @ $* @ $* $1 % $2 @ $3 Undo all but the last.
R$* @ $* $@ $>Canonify2 $1 < @ $2 > Insert < > and finish

# else we must be a local name
R$* $@ $>Canonify2 $1

################################################
### Ruleset 96 -- bottom half of ruleset 3 ###
################################################

SCanonify2=96

# handle special cases for local names
R$* < @ localhost > $* $: $1 < @ $j . > $2 no domain at all
R$* < @ localhost . $m > $* $: $1 < @ $j . > $2 local domain
R$* < @ localhost . UUCP > $* $: $1 < @ $j . > $2 .UUCP domain

# check for IPv4/IPv6 domain literal
R$* < @ [ $+ ] > $* $: $1 < @@ [ $2 ] > $3 mark [addr]
R$* < @@ $=w > $* $: $1 < @ $j . > $3 self-literal
R$* < @@ $+ > $* $@ $1 < @ $2 > $3 canon IP addr

# look up domains in the domain table
#R$* < @ $+ > $* $: $1 < @ $(domaintable $2 $) > $3

# pass UUCP addresses straight through
R$* < @ $+ . UUCP > $* $@ $1 < @ $2 . UUCP . > $3
# hostnames ending in class P are always canonical
R$* < @ $* $=P > $* $: $1 < @ $2 $3 . > $4
R$* < @ $* $~P > $* $: $&{daemon_flags} $| $1 < @ $2 $3 > $4
R$* CC $* $| $* < @ $+.$+ > $* $: $3 < @ $4.$5 . > $6
R$* CC $* $| $* $: $3
# pass to name server to make hostname canonical
R$* $| $* < @ $* > $* $: $2 < @ $[ $3 $] > $4
R$* $| $* $: $2

# local host aliases and pseudo-domains are always canonical
R$* < @ $=w > $* $: $1 < @ $2 . > $3
R$* < @ $=M > $* $: $1 < @ $2 . > $3
R$* < @ $={VirtHost} > $* $: $1 < @ $2 . > $3
R$* < @ $=G > $* $: $1 < @ $2 . > $3
R$* < @ $* . . > $* $1 < @ $2 . > $3

##################################################
### Ruleset 4 -- Final Output Post-rewriting ###
##################################################
Sfinal=4

R$+ :; <@> $@ $1 : handle <list:;>
R$* <@> $@ handle <> and list:;

# strip trailing dot off possibly canonical name
R$* < @ $+ . > $* $1 < @ $2 > $3

# eliminate internal code
R$* < @ *LOCAL* > $* $1 < @ $j > $2

# externalize local domain info
R$* < $+ > $* $1 $2 $3 defocus
R@ $+ : @ $+ : $+ @ $1 , @ $2 : $3 <route-addr> canonical
R@ $* $@ @ $1 ... and exit

# UUCP must always be presented in old form
R$+ @ $- . UUCP $2!$1 u@h.UUCP => h!u

# Added for (AIX)
# put x400 back
R$+:/C=$+ $:/C=$2
R$+.UUCP/C=$+ $:/C=$2
# put DECnet back in :: form
R$+ @ $+ . DECNET $2 :: $1 u@h.DECNET => h::u

# delete duplicate local names
R$+ % $=w @ $=w $1 @ $2 u%host@host => u@host

##############################################################
### Ruleset 97 -- recanonicalize and call ruleset zero ###
### (used for recursive calls) ###
##############################################################

SRecurse=97
R$* $: $>canonify $1
R$* $@ $>parse $1

################################################################################
# #
# S6: Parsing addresses for nameserver queries #
# #
# This ruleset is applied to an address before querying the nameserver #
# for any MB, MR, or MG records that match the address. It will only #
# parse an address of the form "user@domain"; it returns the result in #
# the form "user.domain", which is suitable for the nameserver query, #
# and it prepends a "$#" token to indicate success. #
#
# Added for AIX
#
################################################################################
S6

#
# Pass only addresses consisting of exactly one token, an '@', and one
# or more tokens.
#
R$-@$+ $#$1.$2

######################################
### Ruleset 0 -- Parse Address ###
######################################

Sparse=0

R$* $: $>Parse0 $1 initial parsing
R<@> $#local $: <@> special case error msgs
R$* $: $>ParseLocal $1 handle local hacks
R$* $: $>Parse1 $1 final parsing

#
# Parse0 -- do initial syntax checking and eliminate local addresses.
# This should either return with the (possibly modified) input
# or return with a #error mailer. It should not return with a
# #mailer other than the #error mailer.
#

SParse0
R<@> $@ <@> special case error msgs
R$* : $* ; <@> $#error $@ 5.1.3 $: "553 List:; syntax illegal for recipient addresses"
R@ <@ $* > < @ $1 > catch "@@host" bogosity
R<@ $+> $#error $@ 5.1.3 $: "553 User address required"
R$+ <@> $#error $@ 5.1.3 $: "553 Hostname required"
R$* $: <> $1
R<> $* < @ [ $* ] : $+ > $* $1 < @ [ $2 ] : $3 > $4
R<> $* < @ [ $* ] , $+ > $* $1 < @ [ $2 ] , $3 > $4
R<> $* < @ [ $* ] $+ > $* $#error $@ 5.1.2 $: "553 Invalid address"
R<> $* < @ [ $+ ] > $* $1 < @ [ $2 ] > $3
R<> $* <$* : $* > $* $#error $@ 5.1.3 $: "553 Colon illegal in host name part"
R<> $* $1
R$* < @ . $* > $* $#error $@ 5.1.2 $: "553 Invalid host name"
R$* < @ $* .. $* > $* $#error $@ 5.1.2 $: "553 Invalid host name"
R$* < @ $* @ > $* $#error $@ 5.1.2 $: "553 Invalid route address"
R$* @ $* < @ $* > $* $#error $@ 5.1.3 $: "553 Invalid route address"
R$* , $~O $* $#error $@ 5.1.3 $: "553 Invalid route address"

# now delete the local info -- note $=O to find characters that cause forwarding
R$* < @ > $* $@ $>Parse0 $>canonify $1 user@ => user
R< @ $=w . > : $* $@ $>Parse0 $>canonify $2 @here:... -> ...
R$- < @ $=w . > $: $(dequote $1 $) < @ $2 . > dequote "foo"@here
R< @ $+ > $#error $@ 5.1.3 $: "553 User address required"
R$* $=O $* < @ $=w . > $@ $>Parse0 $>canonify $1 $2 $3 ...@here -> ...
R$- $: $(dequote $1 $) < @ *LOCAL* > dequote "foo"
R< @ *LOCAL* > $#error $@ 5.1.3 $: "553 User address required"
R$* $=O $* < @ *LOCAL* >
$@ $>Parse0 $>canonify $1 $2 $3 ...@*LOCAL* -> ...
R$* < @ *LOCAL* > $: $1

#
# Parse1 -- the bottom half of ruleset 0.
#

SParse1

# handle numeric address spec
R$* < @ [ $+ ] > $* $: $>ParseLocal $1 < @ [ $2 ] > $3 numeric internet spec
R$* < @ [ $+ ] > $* $: $1 < @ [ $2 ] : $S > $3 Add smart host to path
R$* < @ [ $+ ] : > $* $#esmtp $@ [$2] $: $1 < @ [$2] > $3 no smarthost: send
R$* < @ [ $+ ] : $- : $*> $* $#$3 $@ $4 $: $1 < @ [$2] > $5 smarthost with mailer
R$* < @ [ $+ ] : $+ > $* $#esmtp $@ $3 $: $1 < @ [$2] > $4 smarthost without mailer

# handle virtual users
#R$+ $: <!> $1 Mark for lookup
#R<!> $+ < @ $={VirtHost} . > $: < $(virtuser $1 @ $2 $@ $1 $: @ $) > $1 < @ $2 . >
#R<!> $+ < @ $=w . > $: < $(virtuser $1 @ $2 $@ $1 $: @ $) > $1 < @ $2 . >
#R<@> $+ + $+ < @ $* . >
$: < $(virtuser $1 + + @ $3 $@ $1 $@ $2 $@ +$2 $: @ $) > $1 + $2 < @ $3 . >
#R<@> $+ + $* < @ $* . >
$: < $(virtuser $1 + * @ $3 $@ $1 $@ $2 $@ +$2 $: @ $) > $1 + $2 < @ $3 . >
#R<@> $+ + $* < @ $* . >
$: < $(virtuser $1 @ $3 $@ $1 $@ $2 $@ +$2 $: @ $) > $1 + $2 < @ $3 . >
#R<@> $+ + $+ < @ $+ . > $: < $(virtuser + + @ $3 $@ $1 $@ $2 $@ +$2 $: @ $) > $1 + $2 < @ $3 . >
#R<@> $+ + $* < @ $+ . > $: < $(virtuser + * @ $3 $@ $1 $@ $2 $@ +$2 $: @ $) > $1 + $2 < @ $3 . >
#R<@> $+ + $* < @ $+ . > $: < $(virtuser @ $3 $@ $1 $@ $2 $@ +$2 $: ! $) > $1 + $2 < @ $3 . >
#R<@> $+ < @ $+ . > $: < $(virtuser @ $2 $@ $1 $: @ $) > $1 < @ $2 . >
#R<@> $+ $: $1
#R<!> $+ $: $1
#R< error : $-.$-.$- : $+ > $* $#error $@ $1.$2.$3 $: $4
#R< error : $- $+ > $* $#error $@ $(dequote $1 $) $: $2
#R< $+ > $+ < @ $+ > $: $>Recurse $1

# short circuit local delivery so forwarded email works
R$=L < @ $=w . > $#local $: @ $1 special local names
# Added for x400 (AIX)
R/C=$+/S=$-$*<@$=w.$*> $#local$:$2 x400 addressed local mail
R$+ < @ $=w . > $#local $: $1 regular local name

# not local -- try mailer table lookup
#R$* <@ $+ > $* $: < $2 > $1 < @ $2 > $3 extract host name
#R< $+ . > $* $: < $1 > $2 strip trailing dot
#R< $+ > $* $: < $(mailertable $1 $) > $2 lookup
#R< $~[ : $* > $* $>MailerToTriple < $1 : $2 > $3 check -- resolved?
#R< $+ > $* $: $>Mailertable <$1> $2 try domain

# resolve x400 mail (AIX)
R</C=$*> $#987gateway$:/C=$1

# resolve locally connected UUCP links
R$* < @ $=Z . UUCP. > $* $#uucp-uudom $@ $2 $: $1 < @ $2 .UUCP. > $3
R$* < @ $=Y . UUCP. > $* $#uucp-new $@ $2 $: $1 < @ $2 .UUCP. > $3
R$* < @ $=U . UUCP. > $* $#uucp-old $@ $2 $: $1 < @ $2 .UUCP. > $3

# resolve remotely connected UUCP links (if any)

# resolve fake top level domains by forwarding to other hosts

# Added for AIX
# resolve and RSCS relays. Note that relay is canonicalized.
R$+ < @ $- .$=V > $: $>95 < $V > $1 < @ $2.$3 >
R< @$+ .$=V > : $+ $: $>95 < $V > < @ $1.$2 > : $3

# forward non-local UUCP traffic to our UUCP relay
R$*<@$*.UUCP.>$* $: $>MailerToTriple < $Y > $1 <@$2.UUCP.> $3 uucp mail

# Added for AIX
# figure out what should stay in our local mail system
# Comment out this rule if you want all mail to go to the
# Smart-Host relay defined by "DS" macro.
R$* < @ $* .$=m. > $* $#esmtp $@ $2.$3. $: $1 < @ $2.$3. > $4

# pass names that still have a host to a smarthost (if defined)
R$* < @ $* > $* $: $>MailerToTriple < $S > $1 < @ $2 > $3 glue on smarthost name

# deal with other remote names
R$* < @$* > $* $#esmtp $@ $2 $: $1 < @ $2 > $3 user@host.domain

# handle locally delivered names
R$=L $#local $: @ $1 special local names
R$+ $#local $: $1 regular local names

###########################################################################
### Ruleset 5 -- special rewriting after aliases have been expanded ###
###########################################################################

SLocal_localaddr
Slocaladdr=5
R$+ $: $1 $| $>"Local_localaddr" $1
R$+ $| $#ok $@ $1 no change
R$+ $| $#$* $#$2
R$+ $| $* $: $1

# deal with plussed users so aliases work nicely
R$+ + * $#local $@ $&h $: $1
R$+ + $* $#local $@ + $2 $: $1 + *

# prepend an empty "forward host" on the front
R$+ $: <> $1

# Added for AIX
# send unrecognized local users to a relay host
#R< > $+ + $* $: < $L . > $( user $1 $) + $2
#R< > $+ $: < $L . > $( user $1 $) look up user
#R< $* > $+ <> $* $: < > $2 $3 found; strip $L
#R< $* . > $+ $: < $1 > $2 strip extra dot

# see if we have a relay or a hub
R< > $+ $: < $H > $1 try hub
R< > $+ $: < $R > $1 try relay
R< > $+ $: < > < $1 <> $&h > nope, restore +detail
R< > < $+ <> + $* > $: < > < $1 + $2 > check whether +detail
R< > < $+ <> $* > $: < > < $1 > else discard
R< > < $+ + $* > $* < > < $1 > + $2 $3 find the user part
R< > < $+ > + $* $#local $@ $2 $: @ $1 strip the extra +
R< > < $+ > $@ $1 no +detail
R$+ $: $1 <> $&h add +detail back in
R$+ <> + $* $: $1 + $2 check whether +detail
R$+ <> $* $: $1 else discard
R< local : $* > $* $: $>MailerToTriple < local : $1 > $2 no host extension
R< error : $* > $* $: $>MailerToTriple < error : $1 > $2 no host extension

R< $~[ : $+ > $+ $: $>MailerToTriple < $1 : $2 > $3 < @ $2 >

R< $+ > $+ $@ $>MailerToTriple < $1 > $2 < @ $1 >

###################################################################
### Ruleset 90 -- try domain part of mailertable entry ###
###################################################################

SMailertable=90
R$* <$- . $+ > $* $: $1$2 < $(mailertable .$3 $@ $1$2 $@ $2 $) > $4
R$* <$~[ : $* > $* $>MailerToTriple < $2 : $3 > $4 check -- resolved?
R$* < . $+ > $* $@ $>Mailertable $1 . <$2> $3 no -- strip & try again
R$* < $* > $* $: < $(mailertable . $@ $1$2 $) > $3 try "."
R< $~[ : $* > $* $>MailerToTriple < $1 : $2 > $3 "." found?
R< $* > $* $@ $2 no mailertable match

###################################################################
### Ruleset 95 -- canonify mailer:[user@]host syntax to triple ###
###################################################################

SMailerToTriple=95
R< > $* $@ $1 strip off null relay
R< error : $-.$-.$- : $+ > $* $#error $@ $1.$2.$3 $: $4
R< error : $- : $+ > $* $#error $@ $(dequote $1 $) $: $2
R< error : $+ > $* $#error $: $1
R< local : $* > $* $>CanonLocal < $1 > $2
R< $~[ : $+ @ $+ > $*<$*>$* $# $1 $@ $3 $: $2<@$3> use literal user
R< $~[ : $+ > $* $# $1 $@ $2 $: $3 try qualified mailer
R< $=w > $* $@ $2 delete local host
R< $+ > $* $#relay $@ $1 $: $2 use unqualified mailer

###################################################################
### Ruleset CanonLocal -- canonify local: syntax ###
###################################################################

SCanonLocal
# strip local host from routed addresses
R< $* > < @ $+ > : $+ $@ $>Recurse $3
R< $* > $+ $=O $+ < @ $+ > $@ $>Recurse $2 $3 $4

# strip trailing dot from any host name that may appear
R< $* > $* < @ $* . > $: < $1 > $2 < @ $3 >

# handle local: syntax -- use old user, either with or without host
R< > $* < @ $* > $* $#local $@ $1@$2 $: $1
R< > $+ $#local $@ $1 $: $1

# handle local:user@host syntax -- ignore host part
R< $+ @ $+ > $* < @ $* > $: < $1 > $3 < @ $4 >

# handle local:user syntax
R< $+ > $* <@ $* > $* $#local $@ $2@$3 $: $1
R< $+ > $* $#local $@ $2 $: $1

###################################################################
### Ruleset 93 -- convert header names to masqueraded form ###
###################################################################

SMasqHdr=93

# handle generics database
R$+ < @ $=G . > $: < $1@$2 > $1 < @ $2 . > @ mark
R$+ < @ *LOCAL* > $: < $1@$j > $1 < @ *LOCAL* > @ mark
R< $+ > $+ < $* > @ $: < $(generics $1 $: @ $1 $) > $2 < $3 >
R<@$+ + $* @ $+> $+ < @ $+ >
$: < $(generics $1+*@$3 $@ $2 $:@$1 + $2@$3 $) > $4 < @ $5 >
R<@$+ + $* @ $+> $+ < @ $+ >
$: < $(generics $1@$3 $: $) > $4 < @ $5 >
R<@$+ > $+ < @ $+ > $: < > $2 < @ $3 >
R< > $+ < @ $+ . > $: < $(generics @$2 $@ $1 $: $) > $1 < @ $2 . >
R< > $+ < @ $+ > $: < $(generics $1 $: $) > $1 < @ $2 >
R< > $+ + $* < @ $+ > $: < $(generics $1+* $@ $2 $: $) > $1 + $2 < @ $3 >
R< > $+ + $* < @ $+ > $: < $(generics $1 $: $) > $1 + $2 < @ $3 >
R< $* @ $* > $* < $* > $@ $>canonify $1 @ $2 found qualified
R< $+ > $* < $* > $: $>canonify $1 @ *LOCAL* found unqualified
R< > $* $: $1 not found

# do not masquerade anything in class N
R$* < @ $* $=N . > $@ $1 < @ $2 $3 . >

R$* < @ *LOCAL* > $@ $1 < @ $j . >

###################################################################
### Ruleset 94 -- convert envelope names to masqueraded form ###
###################################################################

SMasqEnv=94
R$* < @ *LOCAL* > $* $: $1 < @ $j . > $2

###################################################################
### Ruleset 98 -- local part of ruleset zero (can be null) ###
###################################################################

SParseLocal=98

# addresses sent to foo@host.REDIRECT will give a 551 error code
R$* < @ $+ .REDIRECT. > $: $1 < @ $2 . REDIRECT . > < ${opMode} >
R$* < @ $+ .REDIRECT. > <i> $: $1 < @ $2 . REDIRECT. >
R$* < @ $+ .REDIRECT. > < $- > $#error $@ 5.1.1 $: "551 User has moved; please try " <$1@$2>

# Added for AIX
# DECNET delivery
R$* < @ $=w .DECNET. > $#local $: $1 local DECnet
R$+ < @ $+ .DECNET. > $#mail11 $@ $2 $: $1 DECnet user

######################################################################
### CanonAddr -- Convert an address into a standard form for
### relay checking. Route address syntax is
### crudely converted into a %-hack address.
###
### Parameters:
### $1 -- full recipient address
###
### Returns:
### parsed address, not in source route form
######################################################################

SCanonAddr
R$* $: $>Parse0 $>canonify $1 make domain canonical

######################################################################
### ParseRecipient -- Strip off hosts in $=R as well as possibly
### $* $=m or the access database.
### Check user portion for host separators.
###
### Parameters:
### $1 -- full recipient address
###
### Returns:
### parsed, non-local-relaying address
######################################################################

SParseRecipient
R$* $: <?> $>CanonAddr $1
R<?> $* < @ $* . > <?> $1 < @ $2 > strip trailing dots
R<?> $- < @ $* > $: <?> $(dequote $1 $) < @ $2 > dequote local part

# if no $=O character, no host in the user portion, we are done
R<?> $* $=O $* < @ $* > $: <NO> $1 $2 $3 < @ $4>
R<?> $* $@ $1

R<NO> $* < @ $* $=R > $: <RELAY> $1 < @ $2 $3 >

R<RELAY> $* < @ $* > $@ $>ParseRecipient $1
R<$+> $* $@ $2

######################################################################
### check_relay -- check hostname/address on SMTP startup
######################################################################

SLocal_check_relay
Scheck_relay
R$* $: $1 $| $>"Local_check_relay" $1
R$* $| $* $| $#$* $#$3
R$* $| $* $| $* $@ $>"Basic_check_relay" $1 $| $2

SBasic_check_relay
# check for deferred delivery mode
R$* $: < $&{deliveryMode} > $1
R< d > $* $@ deferred
R< $* > $* $: $2

######################################################################
### check_mail -- check SMTP `MAIL FROM:' command argument
######################################################################

SLocal_check_mail
Scheck_mail
R$* $: $1 $| $>"Local_check_mail" $1
R$* $| $#$* $#$2
R$* $| $* $@ $>"Basic_check_mail" $1

SBasic_check_mail
# check for deferred delivery mode
R$* $: < $&{deliveryMode} > $1
R< d > $* $@ deferred
R< $* > $* $: $2

# authenticated?
R$* $: $1 $| $>"tls_client" $&{verify} $| MAIL
R$* $| $#$+ $#$2
R$* $| $* $: $1

R<> $@ <OK> we MUST accept <> (RFC 1123)
R$+ $: <?> $1
R<?><$+> $: <@> <$1>
R<?>$+ $: <@> <$1>
R$* $: $&{daemon_flags} $| $1
R$* f $* $| <@> < $* @ $- > $: < ? $&{client_name} > < $3 @ $4 >
R$* u $* $| <@> < $* > $: <?> < $3 >
R$* $| $* $: $2
# handle case of @localhost on address
R<@> < $* @ localhost > $: < ? $&{client_name} > < $1 @ localhost >
R<@> < $* @ [127.0.0.1] >
$: < ? $&{client_name} > < $1 @ [127.0.0.1] >
R<@> < $* @ localhost.$m >
$: < ? $&{client_name} > < $1 @ localhost.$m >
R<@> < $* @ localhost.UUCP >
$: < ? $&{client_name} > < $1 @ localhost.UUCP >
R<@> $* $: $1 no localhost as domain
R<? $=w> $* $: $2 local client: ok
R<? $+> <$+> $#error $@ 5.5.4 $: "553 Real domain name required for sender address"
R<?> $* $: $1
R$* $: <?> $>CanonAddr $1 canonify sender address and mark it
R<?> $* < @ $+ . > <?> $1 < @ $2 > strip trailing dots
# handle non-DNS hostnames (*.bitnet, *.decnet, *.uucp, etc)
R<?> $* < @ $* $=P > $: <OKR> $1 < @ $2 $3 >
R<?> $* < @ $j > $: <OKR> $1 < @ $j >
R<?> $* < @ $+ > $: <? $(resolve $2 $: $2 <PERM> $) > $1 < @ $2 >
R<? $* <$->> $* < @ $+ >
$: <$2> $3 < @ $4 >

# handle case of no @domain on address
R<?> $* $: $&{daemon_flags} $| <?> $1
R$* u $* $| <?> $* $: <OKR> $3
R$* $| $* $: $2
R<?> $* $: < ? $&{client_addr} > $1
R<?> $* $@ <OKR> ...local unqualed ok
R<? $+> $* $#error $@ 5.5.4 $: "553 Domain name required for sender address " $&f
...remote is not
# check results
R<?> $* $: @ $1 mark address: nothing known about it
R<$={ResOk}> $* $: @ $2 domain ok
R<TEMP> $* $#error $@ 4.1.8 $: "451 Domain of sender address " $&f " does not resolve"
R<PERM> $* $#error $@ 5.1.8 $: "553 Domain of sender address " $&f " does not exist"

######################################################################
### check_rcpt -- check SMTP `RCPT TO:' command argument
######################################################################

SLocal_check_rcpt
Scheck_rcpt
R$* $: $1 $| $>"Local_check_rcpt" $1
R$* $| $#$* $#$2
R$* $| $* $@ $>"Basic_check_rcpt" $1

SBasic_check_rcpt
# empty address?
R<> $#error $@ nouser $: "553 User address required"
R$@ $#error $@ nouser $: "553 User address required"
# check for deferred delivery mode
R$* $: < $&{deliveryMode} > $1
R< d > $* $@ deferred
R< $* > $* $: $2

######################################################################
R$* $: $1 $| @ $>"Rcpt_ok" $1
R$* $| @ $#TEMP $+ $: $1 $| T $2
R$* $| @ $#$* $#$2
R$* $| @ RELAY $@ RELAY
R$* $| @ $* $: O $| $>"Relay_ok" $1
R$* $| T $+ $: T $2 $| $>"Relay_ok" $1
R$* $| $#TEMP $+ $#error $2
R$* $| $#$* $#$2
R$* $| RELAY $@ RELAY
R T $+ $| $* $#error $1
# anything else is bogus
R$* $#error $@ 5.7.1 $: "550 Relaying denied"

######################################################################
### Rcpt_ok: is the recipient ok?
######################################################################
SRcpt_ok
R$* $: $>ParseRecipient $1 strip relayable hosts

# authenticated via TLS?
R$* $: $1 $| $>RelayTLS client authenticated?
R$* $| $# $+ $# $2 error/ok?
R$* $| $* $: $1 no

R$* $: $1 $| $>"Local_Relay_Auth" $&{auth_type}
R$* $| $# $* $# $2
R$* $| NO $: $1
R$* $| $* $: $1 $| $&{auth_type}
R$* $| $: $1
R$* $| $={TrustAuthMech} $# RELAY
R$* $| $* $: $1
# anything terminating locally is ok
R$+ < @ $=w > $@ RELAY
R$+ < @ $* $=R > $@ RELAY

# check for local user (i.e. unqualified address)
R$* $: <?> $1
R<?> $* < @ $+ > $: <REMOTE> $1 < @ $2 >
# local user is ok
R<?> $+ $@ RELAY
R<$+> $* $: $2

######################################################################
### Relay_ok: is the relay/sender ok?
######################################################################
SRelay_ok
# anything originating locally is ok
# check IP address
R$* $: $&{client_addr}
R$@ $@ RELAY originated locally
R0 $@ RELAY originated locally
R127.0.0.1 $@ RELAY originated locally
RIPv6:::1 $@ RELAY originated locally
R$=R $* $@ RELAY relayable IP address
R$* $: [ $1 ] put brackets around it...
R$=w $@ RELAY ... and see if it is local

# check client name: first: did it resolve?
R$* $: < $&{client_resolve} >
R<TEMP> $#TEMP $@ 4.4.0 $: "450 Relaying temporarily denied. Cannot resolve PTR record for " $&{client_addr}
R<FORGED> $#error $@ 5.7.1 $: "550 Relaying denied. IP name possibly forged " $&{client_name}
R<FAIL> $#error $@ 5.7.1 $: "550 Relaying denied. IP name lookup failed " $&{client_name}
R$* $: <@> $&{client_name}
# pass to name server to make hostname canonical
R<@> $* $=P $:<?> $1 $2
R<@> $+ $:<?> $[ $1 $]
R$* . $1 strip trailing dots
R<?> $=w $@ RELAY
R<?> $* $=R $@ RELAY

######################################################################
### trust_auth: is user trusted to authenticate as someone else?
###
### Parameters:
### $1: AUTH= parameter from MAIL command
######################################################################

SLocal_trust_auth
Strust_auth
R$* $: $&{auth_type} $| $1
# required by RFC 2554 section 4.
R$@ $| $* $#error $@ 5.7.1 $: "550 not authenticated"
R$* $| $&{auth_authen} $@ identical
R$* $| <$&{auth_authen}> $@ identical
R$* $| $* $: $1 $| $>"Local_trust_auth" $2
R$* $| $#$* $#$2
R$* $#error $@ 5.7.1 $: "550 " $&{auth_authen} " not allowed to act as " $&{auth_author}

######################################################################
### Relay_Auth: allow relaying based on authentication?
###
### Parameters:
### $1: ${auth_type}
######################################################################
SLocal_Relay_Auth

######################################################################
### srv_features: which features to offer to a client?
### (done in server)
######################################################################
Ssrv_features

######################################################################
### try_tls: try to use STARTTLS?
### (done in client)
######################################################################
Stry_tls

######################################################################
### tls_rcpt: is connection with server "good" enough?
### (done in client, per recipient)
###
### Parameters:
### $1: recipient
######################################################################
Stls_rcpt

######################################################################
### tls_client: is connection with client "good" enough?
### (done in server)
###
### Parameters:
### ${verify} $| (MAIL|STARTTLS)
######################################################################
Stls_client
R$* $| $* $@ $>"TLS_connection" $1

######################################################################
### tls_server: is connection with server "good" enough?
### (done in client)
###
### Parameter:
### ${verify}
######################################################################
Stls_server
R$* $@ $>"TLS_connection" $1

######################################################################
### TLS_connection: is TLS connection "good" enough?
###
### Parameters:
### ${verify}
### Requirement: RHS from access map, may be ? for none.
######################################################################
STLS_connection
RSOFTWARE $#error $@ 4.7.0 $: "403 TLS handshake."

######################################################################
### RelayTLS: allow relaying based on TLS authentication
###
### Parameters:
### none
######################################################################
SRelayTLS
# authenticated?

######################################################################
### authinfo: lookup authinfo in the access map
###
### Parameters:
### $1: {server_name}
### $2: {server_addr}
######################################################################
Sauthinfo

#
######################################################################
######################################################################
#####
##### MAIL FILTER DEFINITIONS
#####
######################################################################
######################################################################

#
######################################################################
######################################################################
#####
##### MAILER DEFINITIONS
#####
######################################################################
######################################################################

##################################################
### Local and Program Mailer specification ###
##################################################

##### $Id: local.m4,v 8.59 2004/11/23 00:37:25 ca Exp $ #####

#
# Envelope sender rewriting
#
SEnvFromL
R<@> $n errors to mailer-daemon
R@ <@ $*> $n temporarily bypass Sun bogosity
R$+ $: $>AddDomain $1 add local domain if needed
R$* $: $>MasqEnv $1 do masquerading

#
# Envelope recipient rewriting
#
SEnvToL
R$+ < @ $* > $: $1 strip host part
R$+ + $* $: < $&{addr_type} > $1 + $2 mark with addr type
R<e s> $+ + $* $: $1 remove +detail for sender
R< $* > $+ $: $2 else remove mark

#
# Header sender rewriting
#
SHdrFromL
R<@> $n errors to mailer-daemon
R@ <@ $*> $n temporarily bypass Sun bogosity
R$+ $: $>AddDomain $1 add local domain if needed
R$* $: $>MasqHdr $1 do masquerading

#
# Header recipient rewriting
#
SHdrToL
R$+ $: $>AddDomain $1 add local domain if needed
R$* $: $>MasqHdr $1 do all-masquerading

#
# Common code to add local domain name (only if always-add-domain)
#
SAddDomain

Mlocal, P=/bin/bellmail, F=lsDFMAw5:/|@qmn9, S=EnvFromL/HdrFromL, R=EnvToL/HdrToL,
T=DNS/RFC822/X-Unix,
A=mail -F $g $u
Mprog, P=/bin/sh, F=lsDFMoqeu9, S=EnvFromL/HdrFromL, R=EnvToL/HdrToL, D=$z:/,
T=X-Unix/X-Unix/X-Unix,
A=sh -c $u

#####################################
### SMTP Mailer specification ###
#####################################

##### $Id: smtp.m4,v 8.65 2006/07/12 21:08:10 ca Exp $ #####

#
# common sender and masquerading recipient rewriting
#
SMasqSMTP
R$* < @ $* > $* $@ $1 < @ $2 > $3 already fully qualified
R$+ $@ $1 < @ *LOCAL* > add local qualification

#
# convert pseudo-domain addresses to real domain addresses
#
SPseudoToReal

# pass <route-addr>s through
R< @ $+ > $* $@ < @ $1 > $2 resolve <route-addr>

# output fake domains as user%fake@relay

# do UUCP heuristics; note that these are shared with UUCP mailers
R$+ < @ $+ .UUCP. > $: < $2 ! > $1 convert to UUCP form
R$+ < @ $* > $* $@ $1 < @ $2 > $3 not UUCP form

# leave these in .UUCP form to avoid further tampering
R< $&h ! > $- ! $+ $@ $2 < @ $1 .UUCP. >
R< $&h ! > $-.$+ ! $+ $@ $3 < @ $1.$2 >
R< $&h ! > $+ $@ $1 < @ $&h .UUCP. >
R< $+ ! > $+ $: $1 ! $2 < @ $Y > use relayhostname
R$+ < @ $~[ $* : $+ > $@ $1 < @ $4 > strip mailer: part
R$+ < @ > $: $1 < @ *LOCAL* > if no relayhostname

#
# envelope sender rewriting
#
SEnvFromSMTP
R$+ $: $>PseudoToReal $1 sender/recipient common
R$* :; <@> $@ list:; special case
R$* $: $>MasqSMTP $1 qualify unqual'ed names
R$+ $: $>MasqEnv $1 do masquerading

#
# envelope recipient rewriting --
# also header recipient if not masquerading recipients
#
SEnvToSMTP
R$+ $: $>PseudoToReal $1 sender/recipient common
R$+ $: $>MasqSMTP $1 qualify unqual'ed names
R$* < @ *LOCAL* > $* $: $1 < @ $j . > $2

#
# header sender and masquerading header recipient rewriting
#
SHdrFromSMTP
R$+ $: $>PseudoToReal $1 sender/recipient common
R:; <@> $@ list:; special case

# do special header rewriting
R$* <@> $* $@ $1 <@> $2 pass null host through
R< @ $* > $* $@ < @ $1 > $2 pass route-addr through
R$* $: $>MasqSMTP $1 qualify unqual'ed names
R$+ $: $>MasqHdr $1 do masquerading

#
# relay mailer header masquerading recipient rewriting
#
SMasqRelay
R$+ $: $>MasqSMTP $1
R$+ $: $>MasqHdr $1

Msmtp, P=[IPC], F=mDFMuX, S=EnvFromSMTP/HdrFromSMTP, R=EnvToSMTP/HdrFromSMTP, E=\r\n, L=990,
T=DNS/RFC822/SMTP,
A=TCP $h
Mesmtp, P=[IPC], F=mDFMuXa, S=EnvFromSMTP/HdrFromSMTP, R=EnvToSMTP/HdrFromSMTP, E=\r\n, L=990,
T=DNS/RFC822/SMTP,
A=TCP $h
Msmtp8, P=[IPC], F=mDFMuX8, S=EnvFromSMTP/HdrFromSMTP, R=EnvToSMTP/HdrFromSMTP, E=\r\n, L=990,
T=DNS/RFC822/SMTP,
A=TCP $h
Mdsmtp, P=[IPC], F=mDFMuXa%, S=EnvFromSMTP/HdrFromSMTP, R=EnvToSMTP/HdrFromSMTP, E=\r\n, L=990,
T=DNS/RFC822/SMTP,
A=TCP $h
Mrelay, P=[IPC], F=mDFMuXa8, S=EnvFromSMTP/HdrFromSMTP, R=MasqSMTP/MasqRelay, E=\r\n, L=2040,
T=DNS/RFC822/SMTP,
A=TCP $h

#####################################
### UUCP Mailer specification ###
#####################################

##### $Id: uucp.m4,v 8.44 2001/08/24 19:49:08 ca Exp $ #####

#
# envelope and header sender rewriting
#
SFromU

# handle error address as a special case
R<@> $n errors to mailer-daemon

# list:; syntax should disappear
R:; <@> $@

R$* < @ $* . > $* $1 < @ $2 > $3 strip trailing dots
R$* < @ $=w > $1 strip local name
R<@ $- . UUCP > : $+ $1 ! $2 convert to UUCP format
R<@ $+ > : $+ $1 ! $2 convert to UUCP format
R$* < @ $- . UUCP > $2 ! $1 convert to UUCP format
R$* < @ $+ > $2 ! $1 convert to UUCP format
R$&h ! $+ ! $+ $@ $1 ! $2 $h!...!user => ...!user
R$&h ! $+ $@ $&h ! $1 $h!user => $h!user
R$+ $: $U ! $1 prepend our name
R! $+ $: $k ! $1 in case $U undefined

#
# envelope recipient rewriting
#
SEnvToU

# list:; should disappear
R:; <@> $@

R$* < @ $* . > $* $1 < @ $2 > $3 strip trailing dots
R$* < @ $=w > $1 strip local name
R<@ $- . UUCP > : $+ $1 ! $2 convert to UUCP format
R<@ $+ > : $+ $1 ! $2 convert to UUCP format
R$* < @ $- . UUCP > $2 ! $1 convert to UUCP format
R$* < @ $+ > $2 ! $1 convert to UUCP format

#
# header recipient rewriting
#
SHdrToU

# list:; syntax should disappear
R:; <@> $@

R$* < @ $* . > $* $1 < @ $2 > $3 strip trailing dots
R$* < @ $=w > $1 strip local name
R<@ $- . UUCP > : $+ $1 ! $2 convert to UUCP format
R<@ $+ > : $+ $1 ! $2 convert to UUCP format
R$* < @ $- . UUCP > $2 ! $1 convert to UUCP format
R$* < @ $+ > $2 ! $1 convert to UUCP format
R$&h ! $+ ! $+ $@ $1 ! $2 $h!...!user => ...!user
R$&h ! $+ $@ $&h ! $1 $h!user => $h!user
R$+ $: $U ! $1 prepend our name
R! $+ $: $k ! $1 in case $U undefined

#
# envelope sender rewriting for uucp-dom mailer
#
SEnvFromUD

# handle error address as a special case
R<@> $n errors to mailer-daemon

# pass everything to standard SMTP mailer rewriting
R$* $@ $>EnvFromSMTP $1

#
# envelope sender rewriting for uucp-uudom mailer
#
SEnvFromUUD

# handle error address as a special case
R<@> $n errors to mailer-daemon

# do standard SMTP mailer rewriting
R$* $: $>EnvFromSMTP $1

R$* < @ $* . > $* $1 < @ $2 > $3 strip trailing dots
R<@ $- . UUCP > : $+ $@ $1 ! $2 convert to UUCP format
R<@ $+ > : $+ $@ $1 ! $2 convert to UUCP format
R$* < @ $- . UUCP > $@ $2 ! $1 convert to UUCP format
R$* < @ $+ > $@ $2 ! $1 convert to UUCP format

#
# There are innumerable variations on the UUCP mailer. It really
# is rather absurd.
#

# old UUCP mailer (two names)
Muucp, P=/usr/bin/uux, F=DFMhuUd, S=FromU, R=EnvToU/HdrToU,
M=100000, T=X-UUCP/X-UUCP/X-Unix,
A=uux - -r -a$g -gC $h!rmail ($u)
Muucp-old, P=/usr/bin/uux, F=DFMhuUd, S=FromU, R=EnvToU/HdrToU,
M=100000, T=X-UUCP/X-UUCP/X-Unix,
A=uux - -r -a$g -gC $h!rmail ($u)

# smart UUCP mailer (handles multiple addresses) (two names)
Msuucp, P=/usr/bin/uux, F=mDFMhuUd, S=FromU, R=EnvToU/HdrToU,
M=100000, T=X-UUCP/X-UUCP/X-Unix,
A=uux - -r -a$g -gC $h!rmail ($u)
Muucp-new, P=/usr/bin/uux, F=mDFMhuUd, S=FromU, R=EnvToU/HdrToU,
M=100000, T=X-UUCP/X-UUCP/X-Unix,
A=uux - -r -a$g -gC $h!rmail ($u)

# domain-ized UUCP mailer
Muucp-dom, P=/usr/bin/uux, F=mDFMhud, S=EnvFromUD/HdrFromSMTP, R=EnvToSMTP/HdrFromSMTP,
M=100000, T=X-UUCP/X-UUCP/X-Unix,
A=uux - -r -a$g -gC $h!rmail ($u)

# domain-ized UUCP mailer with UUCP-style sender envelope
Muucp-uudom, P=/usr/bin/uux, F=mDFMhud, S=EnvFromUUD/HdrFromSMTP, R=EnvToSMTP/HdrFromSMTP,
M=100000, T=X-UUCP/X-UUCP/X-Unix,
A=uux - -r -a$g -gC $h!rmail ($u)

# Everything below was added for AIX

###########################################
### UTK-MAIL11 Mailer specification ###
###########################################

##### @(#)mail11.m4 8.1 (Berkeley) 5/23/95 #####

Mmail11, P=/usr/etc/mail11, F=nsFx, S=15, R=25,
A=mail11 $g $x $h $u

S15
R$+ $: $>25 $1 preprocess
R$w :: $+ $@ $w :: $1 ready to go

S25
R$+ < @ $- .UUCP > $: $2 ! $1 back to old style
R$+ < @ $- .DECNET > $: $2 :: $1 convert to DECnet style
R$+ < @ $- .LOCAL > $: $2 :: $1 convert to DECnet style
R$+ < @ $=w. > $: $2 :: $1 convert to DECnet style
R$=w :: $+ $2 strip local names
R$+ :: $+ $@ $1 :: $2 already qualified

#############################################################
### The RFC987 gateway mailer specification ###
### ###
### The RFC987 gateway simulation program and its path ###
### can be renamed to any name and path by modifying the ###
### following Mailer definition below. ###
### ###
#############################################################
M987gateway, P=/usr/lpp/osimf/etc/x400mailer, F=sBFMhulmnSC, S=16, R=26,
A=gateway -f /etc/x400gw.cfg $f $u

S16

# fully qualify nonlocal host names in our local domain.
R$+<@$-> $@$1<@$2.$m>

# leave all other typical domain addresses alone.
R$+<$+> $@$1<$2>

S26
R$+ $:<$1>

Thanks,

Christian C.

ArndW · Post by **ArndW** » Mon Aug 27, 2012 9:48 pm

Well - I guess I asked for it.... but if you look at the file you will see that you didn't actually add any information; the first section is the base configuration and nothing is specified. At a minimum you need to specify a real relay, perhaps "mail.yourdomain.com"

chulett · Post by **chulett** » Tue Aug 28, 2012 6:08 am

I'll say it again - if your error is coming from the stage rather than the command line, leave the mail server property there empty if you aren't doing that already. See if that fixes things.

If you can't get it to work from the command line then you've got bigger problems and need to involve your SysAdmins.