Hi again,
About the problem that Ive to logon to datastage, Ive made some more test.
Working with a client installed on DataStage sever, I can connect to the project only if I omit username and password (Im logged to NT with Administrator User). If I try to write the same Administrator UserName and password on the proper field the error "Failed to connect to host: project: (The connection was refused or RPC daemon is not running (81016))" occur. The error occur also if I try to log to DS with DS User.
Working from remote client i cant log to DS in any way.
From Telnet everythink work fine.
All the services running good also after the re-start.
Thats my problem for the datastage-users.
Thanx
Giovanni Boccia
Sales Engineer
Direzione Industria e Servizi
Datamat - Enabling Your Future
----- Original Message -----
From: "Giovanni Boccia"
To:
Sent: Thursday, September 06, 2001 3:03 PM
Subject: Fw: Failed to connect to host
> Hi Ken,
>
> Thank you for your reply.
>
> Yes Ive tried to telnet to the server and it works. And Im using the
> IP address to connect to the server.
>
> Thanks
>
> Giovanni Boccia
> Sales Engineer
> Direzione Industria e Servizi
> Datamat - Enabling Your Future
>
>
>
> ----- Original Message -----
> From:
> To:
> Sent: Thursday, September 06, 2001 2:55 PM
> Subject: Re: Failed to connect to host
>
>
> >
> > Doublecheck your hostname. Try a direct IP address xxx.xxx.xx.xxx
> > to
find
> > the server. Go to a MS-DOS box and ping the servers IP address.
> > Try
to
> > telnet to the servers IP address from the MS-DOS command line.
> > Telnet
> will
> > try to connect to Universes telnet service. Your problem sounds
> > like
you
> > dont have the right hostname or IP.
> >
> > Good luck!
> > -Ken
> >
> >
> >
> >
> >
> >
boccia@datamat.it on 06-Sep-2001 08:21
> >
> >
> >
> > Please respond to
datastage-users@oliver.com
> >
> > To: datastage-users
> > cc:
> > Subject: Failed to connect to host
> >
> >
> >
> > Hi all,
> >
> > I ve problem logging in DataStage 4.2 server on NT, by the client.
> > The error is "Failed to connect to host: project:
> > (The connection was refused or RPC daemon is not
> > running (81016))".
> >
> > Ive checked and all services are running (also "Uni RPC service");
> > I
have
> > also stop and start the services, but still have problem.
> >
> > Have any of you ever run into such a problem?
> >
> > Thanx in advance.
> >
> >
> > Giovanni Boccia
> > Sales Engineer
> > Direzione Industria e Servizi
> > Datamat - Enabling Your Future
> >
> >
> >
> >
> >
> >
> >
> >
>
>