Hi, all
I have a client that has upgraded from Datastage 4.0 to 4.2.
Now that they have upgraded it does not allow more than 2 Developers to access the system at one time.
Is this right?
I have followed datastage since 3.6 and never before seen a Developer restriction enforced and believed that it was not used in Licence agreements.
Has anyone else encountered this and if so what was your solution.
Thanks in anticipation.
Jack.
Licensing Issue Going from 4.0 to 4.2
We did not met the problem here as each of our developers have one licence... It should be the only solution...
Regards,
Steph.
--- Jack Luchjenbroers wrote:
> Hi, all
>
> I have a client that has upgraded from Datastage 4.0 to 4.2.
>
> Now that they have upgraded it does not allow more than 2 Developers
> to access the system at one time.
>
> Is this right?
>
> I have followed datastage since 3.6 and never before seen a Developer
> restriction enforced and believed that it was not used in Licence
> agreements.
>
> Has anyone else encountered this and if so what was your solution.
>
> Thanks in anticipation.
>
> Jack.
>
=====
|
@..@ |
(----) | - - - - - - - - - - - - - - - - - - - - - - -
( >__< ) | Stephane TISSOT
^^ ~~ ^^ | (stissot@yahoo.com) (stephane_tissot@aldec.fr)
__________________________________________________
Do You Yahoo!?
Make international calls for as low as $.04/minute with Yahoo! Messenger http://phonecard.yahoo.com/
Regards,
Steph.
--- Jack Luchjenbroers wrote:
> Hi, all
>
> I have a client that has upgraded from Datastage 4.0 to 4.2.
>
> Now that they have upgraded it does not allow more than 2 Developers
> to access the system at one time.
>
> Is this right?
>
> I have followed datastage since 3.6 and never before seen a Developer
> restriction enforced and believed that it was not used in Licence
> agreements.
>
> Has anyone else encountered this and if so what was your solution.
>
> Thanks in anticipation.
>
> Jack.
>
=====
|
@..@ |
(----) | - - - - - - - - - - - - - - - - - - - - - - -
( >__< ) | Stephane TISSOT
^^ ~~ ^^ | (stissot@yahoo.com) (stephane_tissot@aldec.fr)
__________________________________________________
Do You Yahoo!?
Make international calls for as low as $.04/minute with Yahoo! Messenger http://phonecard.yahoo.com/
DataStage 4.2 now enforces the user-limit on client licenses. It took several tries, but now clients and universe TCL prompts are managed by the user-limit.
-Ken
stissot@yahoo.com on 23-Jul-2001 07:27
Please respond to datastage-users@oliver.com
To: datastage-users
cc:
Subject: Re: Licensing Issue Going from 4.0 to 4.2
We did not met the problem here as each of our developers have one licence... It should be the only solution...
Regards,
Steph.
--- Jack Luchjenbroers wrote:
> Hi, all
>
> I have a client that has upgraded from Datastage 4.0 to 4.2.
>
> Now that they have upgraded it does not allow more than 2 Developers
> to access the system at one time.
>
> Is this right?
>
> I have followed datastage since 3.6 and never before seen a Developer
> restriction enforced and believed that it was not used in Licence
> agreements.
>
> Has anyone else encountered this and if so what was your solution.
>
> Thanks in anticipation.
>
> Jack.
>
=====
|
@..@ |
(----) | - - - - - - - - - - - - - - - - - - - - - - -
( >__< ) | Stephane TISSOT
^^ ~~ ^^ | (stissot@yahoo.com) (stephane_tissot@aldec.fr)
__________________________________________________
Do You Yahoo!?
Make international calls for as low as $.04/minute with Yahoo! Messenger http://phonecard.yahoo.com/
-Ken
stissot@yahoo.com on 23-Jul-2001 07:27
Please respond to datastage-users@oliver.com
To: datastage-users
cc:
Subject: Re: Licensing Issue Going from 4.0 to 4.2
We did not met the problem here as each of our developers have one licence... It should be the only solution...
Regards,
Steph.
--- Jack Luchjenbroers wrote:
> Hi, all
>
> I have a client that has upgraded from Datastage 4.0 to 4.2.
>
> Now that they have upgraded it does not allow more than 2 Developers
> to access the system at one time.
>
> Is this right?
>
> I have followed datastage since 3.6 and never before seen a Developer
> restriction enforced and believed that it was not used in Licence
> agreements.
>
> Has anyone else encountered this and if so what was your solution.
>
> Thanks in anticipation.
>
> Jack.
>
=====
|
@..@ |
(----) | - - - - - - - - - - - - - - - - - - - - - - -
( >__< ) | Stephane TISSOT
^^ ~~ ^^ | (stissot@yahoo.com) (stephane_tissot@aldec.fr)
__________________________________________________
Do You Yahoo!?
Make international calls for as low as $.04/minute with Yahoo! Messenger http://phonecard.yahoo.com/
if you only have a 2 developer licence then 4.2 will only allow you to connect 2 at once (full licensing was not enforced before, it is now). check what your licence limit is, if its more than 2, then contact support since it should allow all your purchased users to access the server.
Andrew Webb
Principal Presales Consultant
Ascential Software
Changing the Way the World Looks At Information www.ascentialsoftware.com
Mobile : +44 (0)777 5762347
Direct : +44 (0)20 8818 0717
Switchboard : +44 (0)20 8818 0700
Fax: +44 (0)20 8818 0701
Email: andrew.webb@ascentialsoftware.com
This message is intended for the sole use of the intended recipient and may contain information that is confidential and privileged and/or attorneys work product. Any review or distribution by any other person is prohibited. If you are not the intended recipient, please immediately contact the sender and delete all copies
> -----Original Message-----
> From: Jack Luchjenbroers [mailto:Jack@luchjenbroers.com]
> Sent: 23 July 2001 11:19 AM
> To: datastage-users@oliver.com
> Subject: Licensing Issue Going from 4.0 to 4.2
>
>
> Hi, all
>
> I have a client that has upgraded from Datastage 4.0 to 4.2.
>
> Now that they have upgraded it does not allow more than 2
> Developers to
> access the system at one time.
>
> Is this right?
>
> I have followed datastage since 3.6 and never before seen a Developer
> restriction enforced and believed that it was not used in Licence
> agreements.
>
> Has anyone else encountered this and if so what was your solution.
>
> Thanks in anticipation.
>
> Jack.
>
Andrew Webb
Principal Presales Consultant
Ascential Software
Changing the Way the World Looks At Information www.ascentialsoftware.com
Mobile : +44 (0)777 5762347
Direct : +44 (0)20 8818 0717
Switchboard : +44 (0)20 8818 0700
Fax: +44 (0)20 8818 0701
Email: andrew.webb@ascentialsoftware.com
This message is intended for the sole use of the intended recipient and may contain information that is confidential and privileged and/or attorneys work product. Any review or distribution by any other person is prohibited. If you are not the intended recipient, please immediately contact the sender and delete all copies
> -----Original Message-----
> From: Jack Luchjenbroers [mailto:Jack@luchjenbroers.com]
> Sent: 23 July 2001 11:19 AM
> To: datastage-users@oliver.com
> Subject: Licensing Issue Going from 4.0 to 4.2
>
>
> Hi, all
>
> I have a client that has upgraded from Datastage 4.0 to 4.2.
>
> Now that they have upgraded it does not allow more than 2
> Developers to
> access the system at one time.
>
> Is this right?
>
> I have followed datastage since 3.6 and never before seen a Developer
> restriction enforced and believed that it was not used in Licence
> agreements.
>
> Has anyone else encountered this and if so what was your solution.
>
> Thanks in anticipation.
>
> Jack.
>
Jack,
There is a "Users" value you would need to enter when
you install the DataStage components in 4.x versions.
This value is probably 2 for your license.
HTH
Bibhu
--- Jack Luchjenbroers wrote:
> Hi, all
>
> I have a client that has upgraded from Datastage
> 4.0 to 4.2.
>
> Now that they have upgraded it does not allow more
> than 2 Developers to
> access the system at one time.
>
> Is this right?
>
> I have followed datastage since 3.6 and never
> before seen a Developer
> restriction enforced and believed that it was not
> used in Licence
> agreements.
>
> Has anyone else encountered this and if so what was
> your solution.
>
> Thanks in anticipation.
>
> Jack.
>
__________________________________________________
Do You Yahoo!?
Make international calls for as low as $.04/minute with Yahoo! Messenger http://phonecard.yahoo.com/
There is a "Users" value you would need to enter when
you install the DataStage components in 4.x versions.
This value is probably 2 for your license.
HTH
Bibhu
--- Jack Luchjenbroers wrote:
> Hi, all
>
> I have a client that has upgraded from Datastage
> 4.0 to 4.2.
>
> Now that they have upgraded it does not allow more
> than 2 Developers to
> access the system at one time.
>
> Is this right?
>
> I have followed datastage since 3.6 and never
> before seen a Developer
> restriction enforced and believed that it was not
> used in Licence
> agreements.
>
> Has anyone else encountered this and if so what was
> your solution.
>
> Thanks in anticipation.
>
> Jack.
>
__________________________________________________
Do You Yahoo!?
Make international calls for as low as $.04/minute with Yahoo! Messenger http://phonecard.yahoo.com/
Thank You All for your contributions.
We are discussing it with our Account Manager.
Thanks Jack
----- Original Message -----
From: "Bibhu C"
To:
Sent: Tuesday, July 24, 2001 1:03 PM
Subject: Re: Licensing Issue Going from 4.0 to 4.2
> Jack,
>
> There is a "Users" value you would need to enter when
> you install the DataStage components in 4.x versions.
> This value is probably 2 for your license.
>
> HTH
> Bibhu
> --- Jack Luchjenbroers wrote:
> > Hi, all
> >
> > I have a client that has upgraded from Datastage
> > 4.0 to 4.2.
> >
> > Now that they have upgraded it does not allow more
> > than 2 Developers to
> > access the system at one time.
> >
> > Is this right?
> >
> > I have followed datastage since 3.6 and never
> > before seen a Developer
> > restriction enforced and believed that it was not
> > used in Licence
> > agreements.
> >
> > Has anyone else encountered this and if so what was
> > your solution.
> >
> > Thanks in anticipation.
> >
> > Jack.
> >
>
>
> __________________________________________________
> Do You Yahoo!?
> Make international calls for as low as $.04/minute with Yahoo!
> Messenger http://phonecard.yahoo.com/
We are discussing it with our Account Manager.
Thanks Jack
----- Original Message -----
From: "Bibhu C"
To:
Sent: Tuesday, July 24, 2001 1:03 PM
Subject: Re: Licensing Issue Going from 4.0 to 4.2
> Jack,
>
> There is a "Users" value you would need to enter when
> you install the DataStage components in 4.x versions.
> This value is probably 2 for your license.
>
> HTH
> Bibhu
> --- Jack Luchjenbroers wrote:
> > Hi, all
> >
> > I have a client that has upgraded from Datastage
> > 4.0 to 4.2.
> >
> > Now that they have upgraded it does not allow more
> > than 2 Developers to
> > access the system at one time.
> >
> > Is this right?
> >
> > I have followed datastage since 3.6 and never
> > before seen a Developer
> > restriction enforced and believed that it was not
> > used in Licence
> > agreements.
> >
> > Has anyone else encountered this and if so what was
> > your solution.
> >
> > Thanks in anticipation.
> >
> > Jack.
> >
>
>
> __________________________________________________
> Do You Yahoo!?
> Make international calls for as low as $.04/minute with Yahoo!
> Messenger http://phonecard.yahoo.com/