I am having some problems with DataStage Director; when I attempt to edit a Batch defined through the Director, I am not presented the text of the batch job in the Jobs window.
I am connecting to DataStage through a dial-up network connection.
The Version of DataStage is Server: Release 3.6.3r2
The Client is: Release 3.6.3r2.PA2
Running in Unverse 9.5
Unix is HP-UX 11.0
Here is what I am attempting:
From Director List of Jobs, I select a batch job (that I have previously defined). Selecting the Tools menu. Selecting the Batch menu. Selecting the Properties items.
When I wish to view the job text I get nothing but an empty text box. When I look at the dependencies list, there is a complete list of the items I previously added to the batch.
I have looked through the documentation to see if I have overlooked something in my options setup but can find nothing.
What am I doing incorrectly?
Thanks for your help.
Steve Jones
DataStage Batch Edits
Hi Steve,
I am wondering whether the problem you had as described in your previous email (below) were solved?
Hope to hear from you.
Thanks.
Best Regards,
William Tan
--------------------------------------------------------------
William Tan Wee Chai
Systems Engineer
Technical Department
Adtel Systems Sdn Bhd
34 & 36, Jalan SS22/21
Damansara Jaya
47400 Petaling Jaya
Selangor
Malaysia
Tel: +6 03-7727-7277
Fax: +6 03-7727-3198
Email: tanwill@adtel.esb.com.my
Steve Jones wrote:
> I am having some problems with DataStage Director; when I attempt to
> edit a Batch defined through the Director, I am not presented the text
> of the batch job in the Jobs window.
>
> I am connecting to DataStage through a dial-up network connection.
>
> The Version of DataStage is Server: Release 3.6.3r2
> The Client is: Release 3.6.3r2.PA2
> Running in Unverse 9.5
> Unix is HP-UX 11.0
>
> Here is what I am attempting:
>
> >From Director List of Jobs, I select a batch job (that I have
> >previously defined).
> Selecting the Tools menu.
> Selecting the Batch menu.
> Selecting the Properties items.
>
> When I wish to view the job text I get nothing but an empty text box.
> When I look at the dependencies list, there is a complete list of the
> items I previously added to the batch.
>
> I have looked through the documentation to see if I have overlooked
> something in my options setup but can find nothing.
>
> What am I doing incorrectly?
>
> Thanks for your help.
> Steve Jones
I am wondering whether the problem you had as described in your previous email (below) were solved?
Hope to hear from you.
Thanks.
Best Regards,
William Tan
--------------------------------------------------------------
William Tan Wee Chai
Systems Engineer
Technical Department
Adtel Systems Sdn Bhd
34 & 36, Jalan SS22/21
Damansara Jaya
47400 Petaling Jaya
Selangor
Malaysia
Tel: +6 03-7727-7277
Fax: +6 03-7727-3198
Email: tanwill@adtel.esb.com.my
Steve Jones wrote:
> I am having some problems with DataStage Director; when I attempt to
> edit a Batch defined through the Director, I am not presented the text
> of the batch job in the Jobs window.
>
> I am connecting to DataStage through a dial-up network connection.
>
> The Version of DataStage is Server: Release 3.6.3r2
> The Client is: Release 3.6.3r2.PA2
> Running in Unverse 9.5
> Unix is HP-UX 11.0
>
> Here is what I am attempting:
>
> >From Director List of Jobs, I select a batch job (that I have
> >previously defined).
> Selecting the Tools menu.
> Selecting the Batch menu.
> Selecting the Properties items.
>
> When I wish to view the job text I get nothing but an empty text box.
> When I look at the dependencies list, there is a complete list of the
> items I previously added to the batch.
>
> I have looked through the documentation to see if I have overlooked
> something in my options setup but can find nothing.
>
> What am I doing incorrectly?
>
> Thanks for your help.
> Steve Jones
Never hear one word from the list.
Talked with some "support specialist" with the vending company -- he suggested I upgrade from Windows 98. Really helpful.
Steve
----- Original Message -----
From: "William Tan"
To:
Sent: Monday, May 28, 2001 12:46 AM
Subject: Re: DataStage Batch Edits
> Hi Steve,
>
> I am wondering whether the problem you had as described in your
> previous
email (below) were solved?
>
> Hope to hear from you.
> Thanks.
>
>
> Best Regards,
> William Tan
>
> --------------------------------------------------------------
> William Tan Wee Chai
> Systems Engineer
> Technical Department
>
> Adtel Systems Sdn Bhd
> 34 & 36, Jalan SS22/21
> Damansara Jaya
> 47400 Petaling Jaya
> Selangor
> Malaysia
> Tel: +6 03-7727-7277
> Fax: +6 03-7727-3198
> Email: tanwill@adtel.esb.com.my
>
>
>
> Steve Jones wrote:
>
> > I am having some problems with DataStage Director; when I attempt
> > to
edit a Batch defined through the Director, I am not presented the text of the batch job in the Jobs window.
> >
> > I am connecting to DataStage through a dial-up network connection.
> >
> > The Version of DataStage is Server: Release 3.6.3r2
> > The Client is: Release 3.6.3r2.PA2
> > Running in Unverse 9.5
> > Unix is HP-UX 11.0
> >
> > Here is what I am attempting:
> >
> > >From Director List of Jobs, I select a batch job (that I have
previously defined).
> > Selecting the Tools menu.
> > Selecting the Batch menu.
> > Selecting the Properties items.
> >
> > When I wish to view the job text I get nothing but an empty text
> > box.
When I look at the dependencies list, there is a complete list of the items I previously added to the batch.
> >
> > I have looked through the documentation to see if I have overlooked
something in my options setup but can find nothing.
> >
> > What am I doing incorrectly?
> >
> > Thanks for your help.
> > Steve Jones
>
>
>
>
Talked with some "support specialist" with the vending company -- he suggested I upgrade from Windows 98. Really helpful.
Steve
----- Original Message -----
From: "William Tan"
To:
Sent: Monday, May 28, 2001 12:46 AM
Subject: Re: DataStage Batch Edits
> Hi Steve,
>
> I am wondering whether the problem you had as described in your
> previous
email (below) were solved?
>
> Hope to hear from you.
> Thanks.
>
>
> Best Regards,
> William Tan
>
> --------------------------------------------------------------
> William Tan Wee Chai
> Systems Engineer
> Technical Department
>
> Adtel Systems Sdn Bhd
> 34 & 36, Jalan SS22/21
> Damansara Jaya
> 47400 Petaling Jaya
> Selangor
> Malaysia
> Tel: +6 03-7727-7277
> Fax: +6 03-7727-3198
> Email: tanwill@adtel.esb.com.my
>
>
>
> Steve Jones wrote:
>
> > I am having some problems with DataStage Director; when I attempt
> > to
edit a Batch defined through the Director, I am not presented the text of the batch job in the Jobs window.
> >
> > I am connecting to DataStage through a dial-up network connection.
> >
> > The Version of DataStage is Server: Release 3.6.3r2
> > The Client is: Release 3.6.3r2.PA2
> > Running in Unverse 9.5
> > Unix is HP-UX 11.0
> >
> > Here is what I am attempting:
> >
> > >From Director List of Jobs, I select a batch job (that I have
previously defined).
> > Selecting the Tools menu.
> > Selecting the Batch menu.
> > Selecting the Properties items.
> >
> > When I wish to view the job text I get nothing but an empty text
> > box.
When I look at the dependencies list, there is a complete list of the items I previously added to the batch.
> >
> > I have looked through the documentation to see if I have overlooked
something in my options setup but can find nothing.
> >
> > What am I doing incorrectly?
> >
> > Thanks for your help.
> > Steve Jones
>
>
>
>
Our shop is also running release 3.6. Sounds like you somehow deleted your job control after you had everything set up. I created a batch of my own and then, after compiling it, deleted the job control. The dependencies remain once the job control is deleted, even though the details of the run arent there.
In this case, I would just delete the entire batch and recreate it from scratch with the job control setup. Have you tried that?
>>> sljones@smithville.net 05/29/01 07:42AM >>>
Never hear one word from the list.
Talked with some "support specialist" with the vending company -- he suggested I upgrade from Windows 98. Really helpful.
Steve
----- Original Message -----
From: "William Tan"
To:
Sent: Monday, May 28, 2001 12:46 AM
Subject: Re: DataStage Batch Edits
> Hi Steve,
>
> I am wondering whether the problem you had as described in your
> previous
email (below) were solved?
>
> Hope to hear from you.
> Thanks.
>
>
> Best Regards,
> William Tan
>
> --------------------------------------------------------------
> William Tan Wee Chai
> Systems Engineer
> Technical Department
>
> Adtel Systems Sdn Bhd
> 34 & 36, Jalan SS22/21
> Damansara Jaya
> 47400 Petaling Jaya
> Selangor
> Malaysia
> Tel: +6 03-7727-7277
> Fax: +6 03-7727-3198
> Email: tanwill@adtel.esb.com.my
>
>
>
> Steve Jones wrote:
>
> > I am having some problems with DataStage Director; when I attempt
> > to
edit a Batch defined through the Director, I am not presented the text of the batch job in the Jobs window.
> >
> > I am connecting to DataStage through a dial-up network connection.
> >
> > The Version of DataStage is Server: Release 3.6.3r2
> > The Client is: Release 3.6.3r2.PA2
> > Running in Unverse 9.5
> > Unix is HP-UX 11.0
> >
> > Here is what I am attempting:
> >
> > >From Director List of Jobs, I select a batch job (that I have
previously defined).
> > Selecting the Tools menu.
> > Selecting the Batch menu.
> > Selecting the Properties items.
> >
> > When I wish to view the job text I get nothing but an empty text
> > box.
When I look at the dependencies list, there is a complete list of the items I previously added to the batch.
> >
> > I have looked through the documentation to see if I have overlooked
something in my options setup but can find nothing.
> >
> > What am I doing incorrectly?
> >
> > Thanks for your help.
> > Steve Jones
>
>
>
>
In this case, I would just delete the entire batch and recreate it from scratch with the job control setup. Have you tried that?
>>> sljones@smithville.net 05/29/01 07:42AM >>>
Never hear one word from the list.
Talked with some "support specialist" with the vending company -- he suggested I upgrade from Windows 98. Really helpful.
Steve
----- Original Message -----
From: "William Tan"
To:
Sent: Monday, May 28, 2001 12:46 AM
Subject: Re: DataStage Batch Edits
> Hi Steve,
>
> I am wondering whether the problem you had as described in your
> previous
email (below) were solved?
>
> Hope to hear from you.
> Thanks.
>
>
> Best Regards,
> William Tan
>
> --------------------------------------------------------------
> William Tan Wee Chai
> Systems Engineer
> Technical Department
>
> Adtel Systems Sdn Bhd
> 34 & 36, Jalan SS22/21
> Damansara Jaya
> 47400 Petaling Jaya
> Selangor
> Malaysia
> Tel: +6 03-7727-7277
> Fax: +6 03-7727-3198
> Email: tanwill@adtel.esb.com.my
>
>
>
> Steve Jones wrote:
>
> > I am having some problems with DataStage Director; when I attempt
> > to
edit a Batch defined through the Director, I am not presented the text of the batch job in the Jobs window.
> >
> > I am connecting to DataStage through a dial-up network connection.
> >
> > The Version of DataStage is Server: Release 3.6.3r2
> > The Client is: Release 3.6.3r2.PA2
> > Running in Unverse 9.5
> > Unix is HP-UX 11.0
> >
> > Here is what I am attempting:
> >
> > >From Director List of Jobs, I select a batch job (that I have
previously defined).
> > Selecting the Tools menu.
> > Selecting the Batch menu.
> > Selecting the Properties items.
> >
> > When I wish to view the job text I get nothing but an empty text
> > box.
When I look at the dependencies list, there is a complete list of the items I previously added to the batch.
> >
> > I have looked through the documentation to see if I have overlooked
something in my options setup but can find nothing.
> >
> > What am I doing incorrectly?
> >
> > Thanks for your help.
> > Steve Jones
>
>
>
>
Thought that might be the case; however, when I look at the same batch job from a Windows NT Workstation connection everything is fine -- I can see the data, add jobs to the batch and otherwise perform various tasks on the batch.
----- Original Message -----
From: "Lindi Reichel"
To:
Sent: Tuesday, May 29, 2001 1:02 PM
Subject: Re: DataStage Batch Edits
> Our shop is also running release 3.6. Sounds like you somehow
> deleted
your job control after you had everything set up. I created a batch of my own and then, after compiling it, deleted the job control. The dependencies remain once the job control is deleted, even though the details of the run arent there.
> In this case, I would just delete the entire batch and recreate it
> from
scratch with the job control setup. Have you tried that?
>
> >>> sljones@smithville.net 05/29/01 07:42AM >>>
> Never hear one word from the list.
>
> Talked with some "support specialist" with the vending company -- he
> suggested I upgrade from Windows 98. Really helpful.
>
> Steve
>
>
> ----- Original Message -----
> From: "William Tan"
> To:
> Sent: Monday, May 28, 2001 12:46 AM
> Subject: Re: DataStage Batch Edits
>
>
> > Hi Steve,
> >
> > I am wondering whether the problem you had as described in your
> > previous
> email (below) were solved?
> >
> > Hope to hear from you.
> > Thanks.
> >
> >
> > Best Regards,
> > William Tan
> >
> > --------------------------------------------------------------
> > William Tan Wee Chai
> > Systems Engineer
> > Technical Department
> >
> > Adtel Systems Sdn Bhd
> > 34 & 36, Jalan SS22/21
> > Damansara Jaya
> > 47400 Petaling Jaya
> > Selangor
> > Malaysia
> > Tel: +6 03-7727-7277
> > Fax: +6 03-7727-3198
> > Email: tanwill@adtel.esb.com.my
> >
> >
> >
> > Steve Jones wrote:
> >
> > > I am having some problems with DataStage Director; when I attempt
> > > to
> edit a Batch defined through the Director, I am not presented the text
> of the batch job in the Jobs window.
> > >
> > > I am connecting to DataStage through a dial-up network connection.
> > >
> > > The Version of DataStage is Server: Release 3.6.3r2
> > > The Client is: Release 3.6.3r2.PA2
> > > Running in Unverse 9.5
> > > Unix is HP-UX 11.0
> > >
> > > Here is what I am attempting:
> > >
> > > >From Director List of Jobs, I select a batch job (that I have
> previously defined).
> > > Selecting the Tools menu.
> > > Selecting the Batch menu.
> > > Selecting the Properties items.
> > >
> > > When I wish to view the job text I get nothing but an empty text
> > > box.
> When I look at the dependencies list, there is a complete list of the
items
> I previously added to the batch.
> > >
> > > I have looked through the documentation to see if I have
> > > overlooked
> something in my options setup but can find nothing.
> > >
> > > What am I doing incorrectly?
> > >
> > > Thanks for your help.
> > > Steve Jones
> >
> >
> >
> >
>
>
----- Original Message -----
From: "Lindi Reichel"
To:
Sent: Tuesday, May 29, 2001 1:02 PM
Subject: Re: DataStage Batch Edits
> Our shop is also running release 3.6. Sounds like you somehow
> deleted
your job control after you had everything set up. I created a batch of my own and then, after compiling it, deleted the job control. The dependencies remain once the job control is deleted, even though the details of the run arent there.
> In this case, I would just delete the entire batch and recreate it
> from
scratch with the job control setup. Have you tried that?
>
> >>> sljones@smithville.net 05/29/01 07:42AM >>>
> Never hear one word from the list.
>
> Talked with some "support specialist" with the vending company -- he
> suggested I upgrade from Windows 98. Really helpful.
>
> Steve
>
>
> ----- Original Message -----
> From: "William Tan"
> To:
> Sent: Monday, May 28, 2001 12:46 AM
> Subject: Re: DataStage Batch Edits
>
>
> > Hi Steve,
> >
> > I am wondering whether the problem you had as described in your
> > previous
> email (below) were solved?
> >
> > Hope to hear from you.
> > Thanks.
> >
> >
> > Best Regards,
> > William Tan
> >
> > --------------------------------------------------------------
> > William Tan Wee Chai
> > Systems Engineer
> > Technical Department
> >
> > Adtel Systems Sdn Bhd
> > 34 & 36, Jalan SS22/21
> > Damansara Jaya
> > 47400 Petaling Jaya
> > Selangor
> > Malaysia
> > Tel: +6 03-7727-7277
> > Fax: +6 03-7727-3198
> > Email: tanwill@adtel.esb.com.my
> >
> >
> >
> > Steve Jones wrote:
> >
> > > I am having some problems with DataStage Director; when I attempt
> > > to
> edit a Batch defined through the Director, I am not presented the text
> of the batch job in the Jobs window.
> > >
> > > I am connecting to DataStage through a dial-up network connection.
> > >
> > > The Version of DataStage is Server: Release 3.6.3r2
> > > The Client is: Release 3.6.3r2.PA2
> > > Running in Unverse 9.5
> > > Unix is HP-UX 11.0
> > >
> > > Here is what I am attempting:
> > >
> > > >From Director List of Jobs, I select a batch job (that I have
> previously defined).
> > > Selecting the Tools menu.
> > > Selecting the Batch menu.
> > > Selecting the Properties items.
> > >
> > > When I wish to view the job text I get nothing but an empty text
> > > box.
> When I look at the dependencies list, there is a complete list of the
items
> I previously added to the batch.
> > >
> > > I have looked through the documentation to see if I have
> > > overlooked
> something in my options setup but can find nothing.
> > >
> > > What am I doing incorrectly?
> > >
> > > Thanks for your help.
> > > Steve Jones
> >
> >
> >
> >
>
>