It can be done yes. Datastage Manager - Export - Datastage Components
On this screen you can choose if you want to export the "whole project" or just one "job design" Ive done this succesfully. You might have to go to Options and enable
(click) "By individual component". I had to do this because my version of Datastage defaulted to exporting the entire project only.
Hope this helps.
Dirk
-----Original Message-----
From: Nuno Pimenta [mailto:nuno.pimenta@tmn.pt]
Sent: Wednesday, October 17, 2001 9:48 AM
To: LIST-DataStage (E-mail)
Subject: Export only one Job
Hi again,
Can we export only one job from a project that have many jobs? Is dsexport limited by project, or we can achieve one job inside the project?
Thanks
NP
==========================================================
This message contains information intended for the perusal, and/or use (if so stated), by the stated addressee(s) only. The information is confidential and privileged. If you are not an intended recipient, do not peruse, use, disseminate, distribute, copy or in any manner rely upon the information contained in this message (directly or indirectly). The sender and/or the entity represented by the sender shall not be held accountable in the event that this prohibition is disregarded. If you receive this message in error, notify the sender immediately by e-mail, fax or telephone representations contained in this message, whether express or implied, are those of the sender only, unless that sender expressly states them to be the views or representations of an entity or person, who shall be named by the sender and who the sender shall state to represent. No liability shall otherwise attach to any other entity or person. ==========================================================
Export only one Job
Thanks Dirk, but there any utility that enables that in Unix shell? I have read the dsexport parameters and seems like it cant do that.
-----Original Message-----
From: Dirk Moolman [mailto:dirkm@reach.co.za]
Sent: quarta-feira, 17 de Outubro de 2001 14:35
To: datastage-users@oliver.com
Subject: RE: Export only one Job
It can be done yes. Datastage Manager - Export - Datastage Components
On this screen you can choose if you want to export the "whole project" or just one "job design" Ive done this succesfully. You might have to go to Options and enable
(click) "By individual component". I had to do this because my version of Datastage defaulted to exporting the entire project only.
Hope this helps.
Dirk
-----Original Message-----
From: Nuno Pimenta [mailto:nuno.pimenta@tmn.pt]
Sent: Wednesday, October 17, 2001 9:48 AM
To: LIST-DataStage (E-mail)
Subject: Export only one Job
Hi again,
Can we export only one job from a project that have many jobs? Is dsexport limited by project, or we can achieve one job inside the project?
Thanks
NP
==========================================================
This message contains information intended for the perusal, and/or use (if so stated), by the stated addressee(s) only. The information is confidential and privileged. If you are not an intended recipient, do not peruse, use, disseminate, distribute, copy or in any manner rely upon the information contained in this message (directly or indirectly). The sender and/or the entity represented by the sender shall not be held accountable in the event that this prohibition is disregarded. If you receive this message in error, notify the sender immediately by e-mail, fax or telephone representations contained in this message, whether express or implied, are those of the sender only, unless that sender expressly states them to be the views or representations of an entity or person, who shall be named by the sender and who the sender shall state to represent. No liability shall otherwise attach to any other entity or person. ==========================================================
-----Original Message-----
From: Dirk Moolman [mailto:dirkm@reach.co.za]
Sent: quarta-feira, 17 de Outubro de 2001 14:35
To: datastage-users@oliver.com
Subject: RE: Export only one Job
It can be done yes. Datastage Manager - Export - Datastage Components
On this screen you can choose if you want to export the "whole project" or just one "job design" Ive done this succesfully. You might have to go to Options and enable
(click) "By individual component". I had to do this because my version of Datastage defaulted to exporting the entire project only.
Hope this helps.
Dirk
-----Original Message-----
From: Nuno Pimenta [mailto:nuno.pimenta@tmn.pt]
Sent: Wednesday, October 17, 2001 9:48 AM
To: LIST-DataStage (E-mail)
Subject: Export only one Job
Hi again,
Can we export only one job from a project that have many jobs? Is dsexport limited by project, or we can achieve one job inside the project?
Thanks
NP
==========================================================
This message contains information intended for the perusal, and/or use (if so stated), by the stated addressee(s) only. The information is confidential and privileged. If you are not an intended recipient, do not peruse, use, disseminate, distribute, copy or in any manner rely upon the information contained in this message (directly or indirectly). The sender and/or the entity represented by the sender shall not be held accountable in the event that this prohibition is disregarded. If you receive this message in error, notify the sender immediately by e-mail, fax or telephone representations contained in this message, whether express or implied, are those of the sender only, unless that sender expressly states them to be the views or representations of an entity or person, who shall be named by the sender and who the sender shall state to represent. No liability shall otherwise attach to any other entity or person. ==========================================================
Sorry, you got me there ! Maybe someone else knows ... ?
-----Original Message-----
From: Nuno Pimenta [mailto:nuno.pimenta@tmn.pt]
Sent: Wednesday, October 17, 2001 4:01 PM
To: datastage-users@oliver.com
Subject: RE: Export only one Job
Thanks Dirk, but there any utility that enables that in Unix shell? I have read the dsexport parameters and seems like it cant do that.
-----Original Message-----
From: Dirk Moolman [mailto:dirkm@reach.co.za]
Sent: quarta-feira, 17 de Outubro de 2001 14:35
To: datastage-users@oliver.com
Subject: RE: Export only one Job
It can be done yes. Datastage Manager - Export - Datastage Components
On this screen you can choose if you want to export the "whole project" or just one "job design" Ive done this succesfully. You might have to go to Options and enable
(click) "By individual component". I had to do this because my version of Datastage defaulted to exporting the entire project only.
Hope this helps.
Dirk
-----Original Message-----
From: Nuno Pimenta [mailto:nuno.pimenta@tmn.pt]
Sent: Wednesday, October 17, 2001 9:48 AM
To: LIST-DataStage (E-mail)
Subject: Export only one Job
Hi again,
Can we export only one job from a project that have many jobs? Is dsexport limited by project, or we can achieve one job inside the project?
Thanks
NP
==========================================================
This message contains information intended for the perusal, and/or use (if so stated), by the stated addressee(s) only. The information is confidential and privileged. If you are not an intended recipient, do not peruse, use, disseminate, distribute, copy or in any manner rely upon the information contained in this message (directly or indirectly). The sender and/or the entity represented by the sender shall not be held accountable in the event that this prohibition is disregarded. If you receive this message in error, notify the sender immediately by e-mail, fax or telephone representations contained in this message, whether express or implied, are those of the sender only, unless that sender expressly states them to be the views or representations of an entity or person, who shall be named by the sender and who the sender shall state to represent. No liability shall otherwise attach to any other entity or person. ==========================================================
-----Original Message-----
From: Nuno Pimenta [mailto:nuno.pimenta@tmn.pt]
Sent: Wednesday, October 17, 2001 4:01 PM
To: datastage-users@oliver.com
Subject: RE: Export only one Job
Thanks Dirk, but there any utility that enables that in Unix shell? I have read the dsexport parameters and seems like it cant do that.
-----Original Message-----
From: Dirk Moolman [mailto:dirkm@reach.co.za]
Sent: quarta-feira, 17 de Outubro de 2001 14:35
To: datastage-users@oliver.com
Subject: RE: Export only one Job
It can be done yes. Datastage Manager - Export - Datastage Components
On this screen you can choose if you want to export the "whole project" or just one "job design" Ive done this succesfully. You might have to go to Options and enable
(click) "By individual component". I had to do this because my version of Datastage defaulted to exporting the entire project only.
Hope this helps.
Dirk
-----Original Message-----
From: Nuno Pimenta [mailto:nuno.pimenta@tmn.pt]
Sent: Wednesday, October 17, 2001 9:48 AM
To: LIST-DataStage (E-mail)
Subject: Export only one Job
Hi again,
Can we export only one job from a project that have many jobs? Is dsexport limited by project, or we can achieve one job inside the project?
Thanks
NP
==========================================================
This message contains information intended for the perusal, and/or use (if so stated), by the stated addressee(s) only. The information is confidential and privileged. If you are not an intended recipient, do not peruse, use, disseminate, distribute, copy or in any manner rely upon the information contained in this message (directly or indirectly). The sender and/or the entity represented by the sender shall not be held accountable in the event that this prohibition is disregarded. If you receive this message in error, notify the sender immediately by e-mail, fax or telephone representations contained in this message, whether express or implied, are those of the sender only, unless that sender expressly states them to be the views or representations of an entity or person, who shall be named by the sender and who the sender shall state to represent. No liability shall otherwise attach to any other entity or person. ==========================================================
THERE IS NO UNIX (server) SIZE EXPORT IN DATASTAGE!
YOU MUST INCUR ALL NETWORK OVERHEAD GOING BETWEEN YOUR
PC AND THE SERVER. THERE IS NO METHOD IN THE BASE
DATASTAGE PACKAGE. SORRY. HEAVEN FORBID YOU ARE
DIALED-UP ON A 56K MODEM. ALL EXPORT LOGIC IS IN YOUR
GUI Manager client (fat client model instead of thin),
so too bad.
You might check out the version control package ASCL offers...you might find it better on exports
Good luck!
-Ken
--- Dirk Moolman wrote:
> Sorry, you got me there ! Maybe someone else knows
> ... ?
>
> -----Original Message-----
> From: Nuno Pimenta [mailto:nuno.pimenta@tmn.pt]
> Sent: Wednesday, October 17, 2001 4:01 PM
> To: datastage-users@oliver.com
> Subject: RE: Export only one Job
>
>
> Thanks Dirk, but there any utility that enables that
> in Unix shell?
> I have read the dsexport parameters and seems like
> it cant do that.
>
>
> -----Original Message-----
> From: Dirk Moolman [mailto:dirkm@reach.co.za]
> Sent: quarta-feira, 17 de Outubro de 2001 14:35
> To: datastage-users@oliver.com
> Subject: RE: Export only one Job
>
>
> It can be done yes. Datastage Manager - Export -
> Datastage Components
>
> On this screen you can choose if you want to export
> the "whole project"
> or just one "job design"
> Ive done this succesfully. You might have to go to
> Options and enable
> (click) "By individual component". I had to do this
> because my version
> of Datastage defaulted to exporting the entire
> project only.
>
> Hope this helps.
> Dirk
>
> -----Original Message-----
> From: Nuno Pimenta [mailto:nuno.pimenta@tmn.pt]
> Sent: Wednesday, October 17, 2001 9:48 AM
> To: LIST-DataStage (E-mail)
> Subject: Export only one Job
>
>
> Hi again,
>
> Can we export only one job from a project that have
> many jobs?
> Is dsexport limited by project, or we can achieve
> one job inside the
> project?
>
> Thanks
>
> NP
>
>
>
>
>
==========================================================
> This message contains information intended for the
> perusal, and/or use (if
> so stated), by the stated addressee(s) only. The
> information is
> confidential and privileged. If you are not an
> intended recipient, do not
> peruse, use, disseminate, distribute, copy or in any
> manner rely upon the
> information contained in this message (directly or indirectly). The
> sender and/or the entity represented by the sender shall
> not be held accountable
> in the event that this prohibition is disregarded.
> If you receive this
> message in error, notify the sender immediately by
> e-mail, fax or telephone
> representations contained in this message, whether
> express or implied, are
> those of the sender only, unless that sender
> expressly states them to be
> the views or representations of an entity or person,
> who shall be named by
> the sender and who the sender shall state to
> represent. No liability shall
> otherwise attach to any other entity or person.
>
==========================================================
>
__________________________________________________
Do You Yahoo!?
Make a great connection at Yahoo! Personals. http://personals.yahoo.com
YOU MUST INCUR ALL NETWORK OVERHEAD GOING BETWEEN YOUR
PC AND THE SERVER. THERE IS NO METHOD IN THE BASE
DATASTAGE PACKAGE. SORRY. HEAVEN FORBID YOU ARE
DIALED-UP ON A 56K MODEM. ALL EXPORT LOGIC IS IN YOUR
GUI Manager client (fat client model instead of thin),
so too bad.
You might check out the version control package ASCL offers...you might find it better on exports
Good luck!
-Ken
--- Dirk Moolman wrote:
> Sorry, you got me there ! Maybe someone else knows
> ... ?
>
> -----Original Message-----
> From: Nuno Pimenta [mailto:nuno.pimenta@tmn.pt]
> Sent: Wednesday, October 17, 2001 4:01 PM
> To: datastage-users@oliver.com
> Subject: RE: Export only one Job
>
>
> Thanks Dirk, but there any utility that enables that
> in Unix shell?
> I have read the dsexport parameters and seems like
> it cant do that.
>
>
> -----Original Message-----
> From: Dirk Moolman [mailto:dirkm@reach.co.za]
> Sent: quarta-feira, 17 de Outubro de 2001 14:35
> To: datastage-users@oliver.com
> Subject: RE: Export only one Job
>
>
> It can be done yes. Datastage Manager - Export -
> Datastage Components
>
> On this screen you can choose if you want to export
> the "whole project"
> or just one "job design"
> Ive done this succesfully. You might have to go to
> Options and enable
> (click) "By individual component". I had to do this
> because my version
> of Datastage defaulted to exporting the entire
> project only.
>
> Hope this helps.
> Dirk
>
> -----Original Message-----
> From: Nuno Pimenta [mailto:nuno.pimenta@tmn.pt]
> Sent: Wednesday, October 17, 2001 9:48 AM
> To: LIST-DataStage (E-mail)
> Subject: Export only one Job
>
>
> Hi again,
>
> Can we export only one job from a project that have
> many jobs?
> Is dsexport limited by project, or we can achieve
> one job inside the
> project?
>
> Thanks
>
> NP
>
>
>
>
>
==========================================================
> This message contains information intended for the
> perusal, and/or use (if
> so stated), by the stated addressee(s) only. The
> information is
> confidential and privileged. If you are not an
> intended recipient, do not
> peruse, use, disseminate, distribute, copy or in any
> manner rely upon the
> information contained in this message (directly or indirectly). The
> sender and/or the entity represented by the sender shall
> not be held accountable
> in the event that this prohibition is disregarded.
> If you receive this
> message in error, notify the sender immediately by
> e-mail, fax or telephone
> representations contained in this message, whether
> express or implied, are
> those of the sender only, unless that sender
> expressly states them to be
> the views or representations of an entity or person,
> who shall be named by
> the sender and who the sender shall state to
> represent. No liability shall
> otherwise attach to any other entity or person.
>
==========================================================
>
__________________________________________________
Do You Yahoo!?
Make a great connection at Yahoo! Personals. http://personals.yahoo.com
You could write one - The issue would be keeping it up to date. You could test your code by exporting it via the client method and then with your code and diff the results.
-----Original Message-----
From: Kenneth Bland [mailto:kcbland_2000@yahoo.com]
Sent: Thursday, October 18, 2001 3:45 AM
To: datastage-users@oliver.com
Subject: RE: Export only one Job
THERE IS NO UNIX (server) SIZE EXPORT IN DATASTAGE!
YOU MUST INCUR ALL NETWORK OVERHEAD GOING BETWEEN YOUR
PC AND THE SERVER. THERE IS NO METHOD IN THE BASE
DATASTAGE PACKAGE. SORRY. HEAVEN FORBID YOU ARE
DIALED-UP ON A 56K MODEM. ALL EXPORT LOGIC IS IN YOUR
GUI Manager client (fat client model instead of thin),
so too bad.
You might check out the version control package ASCL offers...you might find it better on exports
Good luck!
-Ken
--- Dirk Moolman wrote:
> Sorry, you got me there ! Maybe someone else knows
> ... ?
>
> -----Original Message-----
> From: Nuno Pimenta [mailto:nuno.pimenta@tmn.pt]
> Sent: Wednesday, October 17, 2001 4:01 PM
> To: datastage-users@oliver.com
> Subject: RE: Export only one Job
>
>
> Thanks Dirk, but there any utility that enables that
> in Unix shell?
> I have read the dsexport parameters and seems like
> it cant do that.
>
>
> -----Original Message-----
> From: Dirk Moolman [mailto:dirkm@reach.co.za]
> Sent: quarta-feira, 17 de Outubro de 2001 14:35
> To: datastage-users@oliver.com
> Subject: RE: Export only one Job
>
>
> It can be done yes. Datastage Manager - Export -
> Datastage Components
>
> On this screen you can choose if you want to export
> the "whole project"
> or just one "job design"
> Ive done this succesfully. You might have to go to
> Options and enable
> (click) "By individual component". I had to do this
> because my version
> of Datastage defaulted to exporting the entire
> project only.
>
> Hope this helps.
> Dirk
>
> -----Original Message-----
> From: Nuno Pimenta [mailto:nuno.pimenta@tmn.pt]
> Sent: Wednesday, October 17, 2001 9:48 AM
> To: LIST-DataStage (E-mail)
> Subject: Export only one Job
>
>
> Hi again,
>
> Can we export only one job from a project that have
> many jobs?
> Is dsexport limited by project, or we can achieve
> one job inside the
> project?
>
> Thanks
>
> NP
>
>
>
>
>
==========================================================
> This message contains information intended for the
> perusal, and/or use (if
> so stated), by the stated addressee(s) only. The
> information is
> confidential and privileged. If you are not an
> intended recipient, do not
> peruse, use, disseminate, distribute, copy or in any
> manner rely upon the
> information contained in this message (directly or indirectly). The
> sender and/or the entity represented by the sender shall
> not be held accountable
> in the event that this prohibition is disregarded.
> If you receive this
> message in error, notify the sender immediately by
> e-mail, fax or telephone
> representations contained in this message, whether
> express or implied, are
> those of the sender only, unless that sender
> expressly states them to be
> the views or representations of an entity or person,
> who shall be named by
> the sender and who the sender shall state to
> represent. No liability shall
> otherwise attach to any other entity or person.
>
==========================================================
>
__________________________________________________
Do You Yahoo!?
Make a great connection at Yahoo! Personals. http://personals.yahoo.com
-----Original Message-----
From: Kenneth Bland [mailto:kcbland_2000@yahoo.com]
Sent: Thursday, October 18, 2001 3:45 AM
To: datastage-users@oliver.com
Subject: RE: Export only one Job
THERE IS NO UNIX (server) SIZE EXPORT IN DATASTAGE!
YOU MUST INCUR ALL NETWORK OVERHEAD GOING BETWEEN YOUR
PC AND THE SERVER. THERE IS NO METHOD IN THE BASE
DATASTAGE PACKAGE. SORRY. HEAVEN FORBID YOU ARE
DIALED-UP ON A 56K MODEM. ALL EXPORT LOGIC IS IN YOUR
GUI Manager client (fat client model instead of thin),
so too bad.
You might check out the version control package ASCL offers...you might find it better on exports
Good luck!
-Ken
--- Dirk Moolman wrote:
> Sorry, you got me there ! Maybe someone else knows
> ... ?
>
> -----Original Message-----
> From: Nuno Pimenta [mailto:nuno.pimenta@tmn.pt]
> Sent: Wednesday, October 17, 2001 4:01 PM
> To: datastage-users@oliver.com
> Subject: RE: Export only one Job
>
>
> Thanks Dirk, but there any utility that enables that
> in Unix shell?
> I have read the dsexport parameters and seems like
> it cant do that.
>
>
> -----Original Message-----
> From: Dirk Moolman [mailto:dirkm@reach.co.za]
> Sent: quarta-feira, 17 de Outubro de 2001 14:35
> To: datastage-users@oliver.com
> Subject: RE: Export only one Job
>
>
> It can be done yes. Datastage Manager - Export -
> Datastage Components
>
> On this screen you can choose if you want to export
> the "whole project"
> or just one "job design"
> Ive done this succesfully. You might have to go to
> Options and enable
> (click) "By individual component". I had to do this
> because my version
> of Datastage defaulted to exporting the entire
> project only.
>
> Hope this helps.
> Dirk
>
> -----Original Message-----
> From: Nuno Pimenta [mailto:nuno.pimenta@tmn.pt]
> Sent: Wednesday, October 17, 2001 9:48 AM
> To: LIST-DataStage (E-mail)
> Subject: Export only one Job
>
>
> Hi again,
>
> Can we export only one job from a project that have
> many jobs?
> Is dsexport limited by project, or we can achieve
> one job inside the
> project?
>
> Thanks
>
> NP
>
>
>
>
>
==========================================================
> This message contains information intended for the
> perusal, and/or use (if
> so stated), by the stated addressee(s) only. The
> information is
> confidential and privileged. If you are not an
> intended recipient, do not
> peruse, use, disseminate, distribute, copy or in any
> manner rely upon the
> information contained in this message (directly or indirectly). The
> sender and/or the entity represented by the sender shall
> not be held accountable
> in the event that this prohibition is disregarded.
> If you receive this
> message in error, notify the sender immediately by
> e-mail, fax or telephone
> representations contained in this message, whether
> express or implied, are
> those of the sender only, unless that sender
> expressly states them to be
> the views or representations of an entity or person,
> who shall be named by
> the sender and who the sender shall state to
> represent. No liability shall
> otherwise attach to any other entity or person.
>
==========================================================
>
__________________________________________________
Do You Yahoo!?
Make a great connection at Yahoo! Personals. http://personals.yahoo.com
The job designs are passed to your DS Manager client,
where the design information is then encoded by VB
logic into the dsx or xml formats. Almost no activity
takes place server side.
If you write your own server side export logic, you
will have to recode all of that VB code into Universe
BASIC so that you reproduce the dsx or xml formats
exactly. If you choose your own format, you will have
an easier time of it. The problem becomes importing,
as a custom export format will not be version
friendly. At least the dsx or xml formats allow older
jobs to be upgraded. Writing your own really locks
you into your specific version. Not that I havent
done that already.....
I have put my 2cents worth in with engineering for
totally changing the export logic. If you have
recommendations I encourage you to give feedback. I
think anyone who has tried an export or import via
dial-up to know what Im talking about. Leaving a PC
logged in to do unmonitorred exports is another
security issue, not to mention a pain in the butt.
Good luck!
-Ken
--- Phil Walker wrote:
> You could write one - The issue would be keeping it
> up to date. You could
> test your code by exporting it via the client method
> and then with your code
> and diff the results.
>
> -----Original Message-----
> From: Kenneth Bland [mailto:kcbland_2000@yahoo.com]
> Sent: Thursday, October 18, 2001 3:45 AM
> To: datastage-users@oliver.com
> Subject: RE: Export only one Job
>
>
> THERE IS NO UNIX (server) SIZE EXPORT IN DATASTAGE!
> YOU MUST INCUR ALL NETWORK OVERHEAD GOING BETWEEN
> YOUR
> PC AND THE SERVER. THERE IS NO METHOD IN THE BASE
> DATASTAGE PACKAGE. SORRY. HEAVEN FORBID YOU ARE
> DIALED-UP ON A 56K MODEM. ALL EXPORT LOGIC IS IN
> YOUR
> GUI Manager client (fat client model instead of
> thin),
> so too bad.
>
> You might check out the version control package ASCL offers...you
> might find it better on exports
>
> Good luck!
> -Ken
>
>
> --- Dirk Moolman wrote:
> > Sorry, you got me there ! Maybe someone else knows
> > ... ?
> >
> > -----Original Message-----
> > From: Nuno Pimenta [mailto:nuno.pimenta@tmn.pt]
> > Sent: Wednesday, October 17, 2001 4:01 PM
> > To: datastage-users@oliver.com
> > Subject: RE: Export only one Job
> >
> >
> > Thanks Dirk, but there any utility that enables
> that
> > in Unix shell?
> > I have read the dsexport parameters and seems like
> > it cant do that.
> >
> >
> > -----Original Message-----
> > From: Dirk Moolman [mailto:dirkm@reach.co.za]
> > Sent: quarta-feira, 17 de Outubro de 2001 14:35
> > To: datastage-users@oliver.com
> > Subject: RE: Export only one Job
> >
> >
> > It can be done yes. Datastage Manager - Export -
> > Datastage Components
> >
> > On this screen you can choose if you want to
> export
> > the "whole project"
> > or just one "job design"
> > Ive done this succesfully. You might have to go
> to
> > Options and enable
> > (click) "By individual component". I had to do
> this
> > because my version
> > of Datastage defaulted to exporting the entire
> > project only.
> >
> > Hope this helps.
> > Dirk
> >
> > -----Original Message-----
> > From: Nuno Pimenta [mailto:nuno.pimenta@tmn.pt]
> > Sent: Wednesday, October 17, 2001 9:48 AM
> > To: LIST-DataStage (E-mail)
> > Subject: Export only one Job
> >
> >
> > Hi again,
> >
> > Can we export only one job from a project that
> have
> > many jobs?
> > Is dsexport limited by project, or we can achieve
> > one job inside the
> > project?
> >
> > Thanks
> >
> > NP
> >
> >
> >
> >
> >
>
==========================================================
> > This message contains information intended for the
> > perusal, and/or use (if
> > so stated), by the stated addressee(s) only. The information is
> > confidential and privileged. If you are not an
> > intended recipient, do not
> > peruse, use, disseminate, distribute, copy or in
> any
> > manner rely upon the
> > information contained in this message (directly or indirectly). The
> > sender and/or the entity represented by the sender shall
> > not be held accountable
> > in the event that this prohibition is disregarded.
> > If you receive this
> > message in error, notify the sender immediately by
> > e-mail, fax or telephone
> > representations contained in this message, whether
> > express or implied, are
> > those of the sender only, unless that sender
> > expressly states them to be
> > the views or representations of an entity or
> person,
> > who shall be named by
> > the sender and who the sender shall state to
> > represent. No liability shall
> > otherwise attach to any other entity or person.
> >
>
==========================================================
> >
>
>
> __________________________________________________
> Do You Yahoo!?
> Make a great connection at Yahoo! Personals.
> http://personals.yahoo.com
>
>
__________________________________________________
Do You Yahoo!?
Make a great connection at Yahoo! Personals. http://personals.yahoo.com
where the design information is then encoded by VB
logic into the dsx or xml formats. Almost no activity
takes place server side.
If you write your own server side export logic, you
will have to recode all of that VB code into Universe
BASIC so that you reproduce the dsx or xml formats
exactly. If you choose your own format, you will have
an easier time of it. The problem becomes importing,
as a custom export format will not be version
friendly. At least the dsx or xml formats allow older
jobs to be upgraded. Writing your own really locks
you into your specific version. Not that I havent
done that already.....
I have put my 2cents worth in with engineering for
totally changing the export logic. If you have
recommendations I encourage you to give feedback. I
think anyone who has tried an export or import via
dial-up to know what Im talking about. Leaving a PC
logged in to do unmonitorred exports is another
security issue, not to mention a pain in the butt.
Good luck!
-Ken
--- Phil Walker wrote:
> You could write one - The issue would be keeping it
> up to date. You could
> test your code by exporting it via the client method
> and then with your code
> and diff the results.
>
> -----Original Message-----
> From: Kenneth Bland [mailto:kcbland_2000@yahoo.com]
> Sent: Thursday, October 18, 2001 3:45 AM
> To: datastage-users@oliver.com
> Subject: RE: Export only one Job
>
>
> THERE IS NO UNIX (server) SIZE EXPORT IN DATASTAGE!
> YOU MUST INCUR ALL NETWORK OVERHEAD GOING BETWEEN
> YOUR
> PC AND THE SERVER. THERE IS NO METHOD IN THE BASE
> DATASTAGE PACKAGE. SORRY. HEAVEN FORBID YOU ARE
> DIALED-UP ON A 56K MODEM. ALL EXPORT LOGIC IS IN
> YOUR
> GUI Manager client (fat client model instead of
> thin),
> so too bad.
>
> You might check out the version control package ASCL offers...you
> might find it better on exports
>
> Good luck!
> -Ken
>
>
> --- Dirk Moolman wrote:
> > Sorry, you got me there ! Maybe someone else knows
> > ... ?
> >
> > -----Original Message-----
> > From: Nuno Pimenta [mailto:nuno.pimenta@tmn.pt]
> > Sent: Wednesday, October 17, 2001 4:01 PM
> > To: datastage-users@oliver.com
> > Subject: RE: Export only one Job
> >
> >
> > Thanks Dirk, but there any utility that enables
> that
> > in Unix shell?
> > I have read the dsexport parameters and seems like
> > it cant do that.
> >
> >
> > -----Original Message-----
> > From: Dirk Moolman [mailto:dirkm@reach.co.za]
> > Sent: quarta-feira, 17 de Outubro de 2001 14:35
> > To: datastage-users@oliver.com
> > Subject: RE: Export only one Job
> >
> >
> > It can be done yes. Datastage Manager - Export -
> > Datastage Components
> >
> > On this screen you can choose if you want to
> export
> > the "whole project"
> > or just one "job design"
> > Ive done this succesfully. You might have to go
> to
> > Options and enable
> > (click) "By individual component". I had to do
> this
> > because my version
> > of Datastage defaulted to exporting the entire
> > project only.
> >
> > Hope this helps.
> > Dirk
> >
> > -----Original Message-----
> > From: Nuno Pimenta [mailto:nuno.pimenta@tmn.pt]
> > Sent: Wednesday, October 17, 2001 9:48 AM
> > To: LIST-DataStage (E-mail)
> > Subject: Export only one Job
> >
> >
> > Hi again,
> >
> > Can we export only one job from a project that
> have
> > many jobs?
> > Is dsexport limited by project, or we can achieve
> > one job inside the
> > project?
> >
> > Thanks
> >
> > NP
> >
> >
> >
> >
> >
>
==========================================================
> > This message contains information intended for the
> > perusal, and/or use (if
> > so stated), by the stated addressee(s) only. The information is
> > confidential and privileged. If you are not an
> > intended recipient, do not
> > peruse, use, disseminate, distribute, copy or in
> any
> > manner rely upon the
> > information contained in this message (directly or indirectly). The
> > sender and/or the entity represented by the sender shall
> > not be held accountable
> > in the event that this prohibition is disregarded.
> > If you receive this
> > message in error, notify the sender immediately by
> > e-mail, fax or telephone
> > representations contained in this message, whether
> > express or implied, are
> > those of the sender only, unless that sender
> > expressly states them to be
> > the views or representations of an entity or
> person,
> > who shall be named by
> > the sender and who the sender shall state to
> > represent. No liability shall
> > otherwise attach to any other entity or person.
> >
>
==========================================================
> >
>
>
> __________________________________________________
> Do You Yahoo!?
> Make a great connection at Yahoo! Personals.
> http://personals.yahoo.com
>
>
__________________________________________________
Do You Yahoo!?
Make a great connection at Yahoo! Personals. http://personals.yahoo.com
Export only one Job
I would have used server side routines to do this and then these could have been called from a suitably defined server routine to do the same thing.
Phil
-----Original Message-----
From: Kenneth Bland [mailto:kcbland_2000@yahoo.com]
Sent: Thursday, October 18, 2001 9:29 AM
To: datastage-users@oliver.com
Subject: RE: Export only one Job
The job designs are passed to your DS Manager client,
where the design information is then encoded by VB
logic into the dsx or xml formats. Almost no activity
takes place server side.
If you write your own server side export logic, you
will have to recode all of that VB code into Universe
BASIC so that you reproduce the dsx or xml formats
exactly. If you choose your own format, you will have
an easier time of it. The problem becomes importing,
as a custom export format will not be version
friendly. At least the dsx or xml formats allow older
jobs to be upgraded. Writing your own really locks
you into your specific version. Not that I havent
done that already.....
I have put my 2cents worth in with engineering for
totally changing the export logic. If you have
recommendations I encourage you to give feedback. I
think anyone who has tried an export or import via
dial-up to know what Im talking about. Leaving a PC
logged in to do unmonitorred exports is another
security issue, not to mention a pain in the butt.
Good luck!
-Ken
--- Phil Walker wrote:
> You could write one - The issue would be keeping it
> up to date. You could
> test your code by exporting it via the client method
> and then with your code
> and diff the results.
>
> -----Original Message-----
> From: Kenneth Bland [mailto:kcbland_2000@yahoo.com]
> Sent: Thursday, October 18, 2001 3:45 AM
> To: datastage-users@oliver.com
> Subject: RE: Export only one Job
>
>
> THERE IS NO UNIX (server) SIZE EXPORT IN DATASTAGE!
> YOU MUST INCUR ALL NETWORK OVERHEAD GOING BETWEEN
> YOUR
> PC AND THE SERVER. THERE IS NO METHOD IN THE BASE
> DATASTAGE PACKAGE. SORRY. HEAVEN FORBID YOU ARE
> DIALED-UP ON A 56K MODEM. ALL EXPORT LOGIC IS IN
> YOUR
> GUI Manager client (fat client model instead of
> thin),
> so too bad.
>
> You might check out the version control package ASCL offers...you
> might find it better on exports
>
> Good luck!
> -Ken
>
>
> --- Dirk Moolman wrote:
> > Sorry, you got me there ! Maybe someone else knows
> > ... ?
> >
> > -----Original Message-----
> > From: Nuno Pimenta [mailto:nuno.pimenta@tmn.pt]
> > Sent: Wednesday, October 17, 2001 4:01 PM
> > To: datastage-users@oliver.com
> > Subject: RE: Export only one Job
> >
> >
> > Thanks Dirk, but there any utility that enables
> that
> > in Unix shell?
> > I have read the dsexport parameters and seems like
> > it cant do that.
> >
> >
> > -----Original Message-----
> > From: Dirk Moolman [mailto:dirkm@reach.co.za]
> > Sent: quarta-feira, 17 de Outubro de 2001 14:35
> > To: datastage-users@oliver.com
> > Subject: RE: Export only one Job
> >
> >
> > It can be done yes. Datastage Manager - Export -
> > Datastage Components
> >
> > On this screen you can choose if you want to
> export
> > the "whole project"
> > or just one "job design"
> > Ive done this succesfully. You might have to go
> to
> > Options and enable
> > (click) "By individual component". I had to do
> this
> > because my version
> > of Datastage defaulted to exporting the entire
> > project only.
> >
> > Hope this helps.
> > Dirk
> >
> > -----Original Message-----
> > From: Nuno Pimenta [mailto:nuno.pimenta@tmn.pt]
> > Sent: Wednesday, October 17, 2001 9:48 AM
> > To: LIST-DataStage (E-mail)
> > Subject: Export only one Job
> >
> >
> > Hi again,
> >
> > Can we export only one job from a project that
> have
> > many jobs?
> > Is dsexport limited by project, or we can achieve
> > one job inside the
> > project?
> >
> > Thanks
> >
> > NP
> >
> >
> >
> >
> >
>
==========================================================
> > This message contains information intended for the
> > perusal, and/or use (if
> > so stated), by the stated addressee(s) only. The information is
> > confidential and privileged. If you are not an
> > intended recipient, do not
> > peruse, use, disseminate, distribute, copy or in
> any
> > manner rely upon the
> > information contained in this message (directly or indirectly). The
> > sender and/or the entity represented by the sender shall
> > not be held accountable
> > in the event that this prohibition is disregarded.
> > If you receive this
> > message in error, notify the sender immediately by
> > e-mail, fax or telephone
> > representations contained in this message, whether
> > express or implied, are
> > those of the sender only, unless that sender
> > expressly states them to be
> > the views or representations of an entity or
> person,
> > who shall be named by
> > the sender and who the sender shall state to
> > represent. No liability shall
> > otherwise attach to any other entity or person.
> >
>
==========================================================
> >
>
>
> __________________________________________________
> Do You Yahoo!?
> Make a great connection at Yahoo! Personals.
> http://personals.yahoo.com
>
>
__________________________________________________
Do You Yahoo!?
Make a great connection at Yahoo! Personals. http://personals.yahoo.com
Phil
-----Original Message-----
From: Kenneth Bland [mailto:kcbland_2000@yahoo.com]
Sent: Thursday, October 18, 2001 9:29 AM
To: datastage-users@oliver.com
Subject: RE: Export only one Job
The job designs are passed to your DS Manager client,
where the design information is then encoded by VB
logic into the dsx or xml formats. Almost no activity
takes place server side.
If you write your own server side export logic, you
will have to recode all of that VB code into Universe
BASIC so that you reproduce the dsx or xml formats
exactly. If you choose your own format, you will have
an easier time of it. The problem becomes importing,
as a custom export format will not be version
friendly. At least the dsx or xml formats allow older
jobs to be upgraded. Writing your own really locks
you into your specific version. Not that I havent
done that already.....
I have put my 2cents worth in with engineering for
totally changing the export logic. If you have
recommendations I encourage you to give feedback. I
think anyone who has tried an export or import via
dial-up to know what Im talking about. Leaving a PC
logged in to do unmonitorred exports is another
security issue, not to mention a pain in the butt.
Good luck!
-Ken
--- Phil Walker wrote:
> You could write one - The issue would be keeping it
> up to date. You could
> test your code by exporting it via the client method
> and then with your code
> and diff the results.
>
> -----Original Message-----
> From: Kenneth Bland [mailto:kcbland_2000@yahoo.com]
> Sent: Thursday, October 18, 2001 3:45 AM
> To: datastage-users@oliver.com
> Subject: RE: Export only one Job
>
>
> THERE IS NO UNIX (server) SIZE EXPORT IN DATASTAGE!
> YOU MUST INCUR ALL NETWORK OVERHEAD GOING BETWEEN
> YOUR
> PC AND THE SERVER. THERE IS NO METHOD IN THE BASE
> DATASTAGE PACKAGE. SORRY. HEAVEN FORBID YOU ARE
> DIALED-UP ON A 56K MODEM. ALL EXPORT LOGIC IS IN
> YOUR
> GUI Manager client (fat client model instead of
> thin),
> so too bad.
>
> You might check out the version control package ASCL offers...you
> might find it better on exports
>
> Good luck!
> -Ken
>
>
> --- Dirk Moolman wrote:
> > Sorry, you got me there ! Maybe someone else knows
> > ... ?
> >
> > -----Original Message-----
> > From: Nuno Pimenta [mailto:nuno.pimenta@tmn.pt]
> > Sent: Wednesday, October 17, 2001 4:01 PM
> > To: datastage-users@oliver.com
> > Subject: RE: Export only one Job
> >
> >
> > Thanks Dirk, but there any utility that enables
> that
> > in Unix shell?
> > I have read the dsexport parameters and seems like
> > it cant do that.
> >
> >
> > -----Original Message-----
> > From: Dirk Moolman [mailto:dirkm@reach.co.za]
> > Sent: quarta-feira, 17 de Outubro de 2001 14:35
> > To: datastage-users@oliver.com
> > Subject: RE: Export only one Job
> >
> >
> > It can be done yes. Datastage Manager - Export -
> > Datastage Components
> >
> > On this screen you can choose if you want to
> export
> > the "whole project"
> > or just one "job design"
> > Ive done this succesfully. You might have to go
> to
> > Options and enable
> > (click) "By individual component". I had to do
> this
> > because my version
> > of Datastage defaulted to exporting the entire
> > project only.
> >
> > Hope this helps.
> > Dirk
> >
> > -----Original Message-----
> > From: Nuno Pimenta [mailto:nuno.pimenta@tmn.pt]
> > Sent: Wednesday, October 17, 2001 9:48 AM
> > To: LIST-DataStage (E-mail)
> > Subject: Export only one Job
> >
> >
> > Hi again,
> >
> > Can we export only one job from a project that
> have
> > many jobs?
> > Is dsexport limited by project, or we can achieve
> > one job inside the
> > project?
> >
> > Thanks
> >
> > NP
> >
> >
> >
> >
> >
>
==========================================================
> > This message contains information intended for the
> > perusal, and/or use (if
> > so stated), by the stated addressee(s) only. The information is
> > confidential and privileged. If you are not an
> > intended recipient, do not
> > peruse, use, disseminate, distribute, copy or in
> any
> > manner rely upon the
> > information contained in this message (directly or indirectly). The
> > sender and/or the entity represented by the sender shall
> > not be held accountable
> > in the event that this prohibition is disregarded.
> > If you receive this
> > message in error, notify the sender immediately by
> > e-mail, fax or telephone
> > representations contained in this message, whether
> > express or implied, are
> > those of the sender only, unless that sender
> > expressly states them to be
> > the views or representations of an entity or
> person,
> > who shall be named by
> > the sender and who the sender shall state to
> > represent. No liability shall
> > otherwise attach to any other entity or person.
> >
>
==========================================================
> >
>
>
> __________________________________________________
> Do You Yahoo!?
> Make a great connection at Yahoo! Personals.
> http://personals.yahoo.com
>
>
__________________________________________________
Do You Yahoo!?
Make a great connection at Yahoo! Personals. http://personals.yahoo.com