Failed to connect to host

[admin]

Hi all,

I ve problem logging in DataStage 4.2 server on NT, by the client. The error is "Failed to connect to host: project: (The connection was refused or RPC daemon
is not running (81016))".

Ive checked and all services are running (also "Uni RPC service"); I have also stop and start the services, but still have problem.

Have any of you ever run into such a problem?

Thanx in advance.


Giovanni Boccia
Sales Engineer
Direzione Industria e Servizi
Datamat - Enabling Your Future

[admin]

Doublecheck your hostname. Try a direct IP address xxx.xxx.xx.xxx to find the server. Go to a MS-DOS box and ping the servers IP address. Try to telnet to the servers IP address from the MS-DOS command line. Telnet will try to connect to Universes telnet service. Your problem sounds like you dont have the right hostname or IP.

Good luck!
-Ken





boccia@datamat.it on 06-Sep-2001 08:21



Please respond to datastage-users@oliver.com

To: datastage-users
cc:
Subject: Failed to connect to host



Hi all,

I ve problem logging in DataStage 4.2 server on NT, by the client. The error is "Failed to connect to host: project: (The connection was refused or RPC daemon is not running (81016))".

Ive checked and all services are running (also "Uni RPC service"); I have also stop and start the services, but still have problem.

Have any of you ever run into such a problem?

Thanx in advance.


Giovanni Boccia
Sales Engineer
Direzione Industria e Servizi
Datamat - Enabling Your Future

[admin]

Hi Ken,

Thank you for your reply.

Yes Ive tried to telnet to the server and it works. And Im using the IP address to connect to the server.

Thanks

Giovanni Boccia
Sales Engineer
Direzione Industria e Servizi
Datamat - Enabling Your Future



----- Original Message -----
From:
To:
Sent: Thursday, September 06, 2001 2:55 PM
Subject: Re: Failed to connect to host


>
> Doublecheck your hostname. Try a direct IP address xxx.xxx.xx.xxx to
> find the server. Go to a MS-DOS box and ping the servers IP address.
> Try to telnet to the servers IP address from the MS-DOS command line.
> Telnet
will
> try to connect to Universes telnet service. Your problem sounds like
> you dont have the right hostname or IP.
>
> Good luck!
> -Ken
>
>
>
>
>
> boccia@datamat.it on 06-Sep-2001 08:21
>
>
>
> Please respond to datastage-users@oliver.com
>
> To: datastage-users
> cc:
> Subject: Failed to connect to host
>
>
>
> Hi all,
>
> I ve problem logging in DataStage 4.2 server on NT, by the client.
> The error is "Failed to connect to host: project:
> (The connection was refused or RPC daemon is not
> running (81016))".
>
> Ive checked and all services are running (also "Uni RPC service"); I
> have also stop and start the services, but still have problem.
>
> Have any of you ever run into such a problem?
>
> Thanx in advance.
>
>
> Giovanni Boccia
> Sales Engineer
> Direzione Industria e Servizi
> Datamat - Enabling Your Future
>
>
>
>
>
>
>
>

[admin]

Hi again,

About the problem that Ive to logon to datastage, Ive made some more test.

Working with a client installed on DataStage sever, I can connect to the project only if I omit username and password (Im logged to NT with Administrator User). If I try to write the same Administrator UserName and password on the proper field the error "Failed to connect to host: project: (The connection was refused or RPC daemon is not running (81016))" occur. The error occur also if I try to log to DS with DS User.

Working from remote client i cant log to DS in any way.

From Telnet everythink work fine.

All the services running good also after the re-start.

Thats my problem for the datastage-users.

Thanx

Giovanni Boccia
Sales Engineer
Direzione Industria e Servizi
Datamat - Enabling Your Future

----- Original Message -----
From: "Giovanni Boccia"
To:
Sent: Thursday, September 06, 2001 3:03 PM
Subject: Fw: Failed to connect to host


> Hi Ken,
>
> Thank you for your reply.
>
> Yes Ive tried to telnet to the server and it works. And Im using the
> IP address to connect to the server.
>
> Thanks
>
> Giovanni Boccia
> Sales Engineer
> Direzione Industria e Servizi
> Datamat - Enabling Your Future
>
>
>
> ----- Original Message -----
> From:
> To:
> Sent: Thursday, September 06, 2001 2:55 PM
> Subject: Re: Failed to connect to host
>
>
> >
> > Doublecheck your hostname. Try a direct IP address xxx.xxx.xx.xxx
> > to
find
> > the server. Go to a MS-DOS box and ping the servers IP address.
> > Try
to
> > telnet to the servers IP address from the MS-DOS command line.
> > Telnet
> will
> > try to connect to Universes telnet service. Your problem sounds
> > like
you
> > dont have the right hostname or IP.
> >
> > Good luck!
> > -Ken
> >
> >
> >
> >
> >
> > boccia@datamat.it on 06-Sep-2001 08:21
> >
> >
> >
> > Please respond to datastage-users@oliver.com
> >
> > To: datastage-users
> > cc:
> > Subject: Failed to connect to host
> >
> >
> >
> > Hi all,
> >
> > I ve problem logging in DataStage 4.2 server on NT, by the client.
> > The error is "Failed to connect to host: project:
> > (The connection was refused or RPC daemon is not
> > running (81016))".
> >
> > Ive checked and all services are running (also "Uni RPC service");
> > I
have
> > also stop and start the services, but still have problem.
> >
> > Have any of you ever run into such a problem?
> >
> > Thanx in advance.
> >
> >
> > Giovanni Boccia
> > Sales Engineer
> > Direzione Industria e Servizi
> > Datamat - Enabling Your Future
> >
> >
> >
> >
> >
> >
> >
> >
>
>

[admin]

Hi Giovanni,

Does it work if you log on as DOMAIN rather than just ?

Regards

- Chris Thornton