Hi,
I have a problem with the following error message - Program "DSU.COMPARE.REC": Line 188, Exception raised in GCI subroutine: Access Violation.Attempting to Cleanup after ABORT raised in stage ARCOCCFILE.COMPARE DataStage Phantom Aborting with @ABORT.CODE = 3.
We had to reinstall our NT server therefore we loaded Datastage (version 4) as a new application.The datastage jobs ran fine before on version 4.
Does anyone out their know if we are maybe missing a dll or do we need to configure any other files so that this problem can be sorted out.
Your assistance is highly appreciated.
Regards
Doshian
CONFIDENTIALITY NOTICE: This e-mail may contain confidential information and is intended only for the use of the recipient named above. Should you receive this e-mail in error, please forward it to dmaharaj@netcare.co.za and delete from your in-box. Any disclosure, copying, distribution or action on the contents of this e-mail is strictly prohibited
Doshian Maharaj
TEL : 482 - 7202
Exception raised in GCI subroutine:Access violation. VERSION
Doshian,
In Manager try compiling the user written routine "COMPARE.REC"
Yours Jack
"Doshian
Maharaj" To:
Subject: Exception raised in GCI subroutine:Access violation.
VERSION 4
04/19/2001
11:44 PM
Please respond
to
informix-datas
tage
Hi,
I have a problem with the following error message - Program
"DSU.COMPARE.REC": Line 188, Exception raised in GCI subroutine: Access Violation.Attempting to Cleanup after ABORT raised in stage ARCOCCFILE.COMPARE DataStage Phantom Aborting with @ABORT.CODE = 3.
We had to reinstall our NT server therefore we loaded Datastage (version 4) as a new application.The datastage jobs ran fine before on version 4.
Does anyone out their know if we are maybe missing a dll or do we need to configure any other files so that this problem can be sorted out.
Your assistance is highly appreciated.
Regards
Doshian
CONFIDENTIALITY NOTICE: This e-mail may contain confidential information and is intended only for the use of the recipient named above. Should you receive this e-mail in error, please forward it to dmaharaj@netcare.co.za and delete from your in-box. Any disclosure, copying, distribution or action on the contents of this e-mail is strictly prohibited
Doshian Maharaj
TEL : 482 - 7202
CAUTION: This correspondence is confidential and intended for the named recipient(s) only. If you are not the named recipient and receive this correspondence in error, you must not copy, distribute or take any action in reliance on it and you should delete it from your system and notify the sender immediately. Thank you.
Unless otherwise stated, any views or opinions expressed are solely those of the author and do not represent those of Vodafone New Zealand Limited.
Vodafone New Zealand Limited
21 Pitt Street, Private Bag 92161, Auckland, 1020, New Zealand Telephone + 64 9 357 5100 Facsimile + 64 9 377 0962
In Manager try compiling the user written routine "COMPARE.REC"
Yours Jack
"Doshian
Maharaj" To:
Subject: Exception raised in GCI subroutine:Access violation.
VERSION 4
04/19/2001
11:44 PM
Please respond
to
informix-datas
tage
Hi,
I have a problem with the following error message - Program
"DSU.COMPARE.REC": Line 188, Exception raised in GCI subroutine: Access Violation.Attempting to Cleanup after ABORT raised in stage ARCOCCFILE.COMPARE DataStage Phantom Aborting with @ABORT.CODE = 3.
We had to reinstall our NT server therefore we loaded Datastage (version 4) as a new application.The datastage jobs ran fine before on version 4.
Does anyone out their know if we are maybe missing a dll or do we need to configure any other files so that this problem can be sorted out.
Your assistance is highly appreciated.
Regards
Doshian
CONFIDENTIALITY NOTICE: This e-mail may contain confidential information and is intended only for the use of the recipient named above. Should you receive this e-mail in error, please forward it to dmaharaj@netcare.co.za and delete from your in-box. Any disclosure, copying, distribution or action on the contents of this e-mail is strictly prohibited
Doshian Maharaj
TEL : 482 - 7202
CAUTION: This correspondence is confidential and intended for the named recipient(s) only. If you are not the named recipient and receive this correspondence in error, you must not copy, distribute or take any action in reliance on it and you should delete it from your system and notify the sender immediately. Thank you.
Unless otherwise stated, any views or opinions expressed are solely those of the author and do not represent those of Vodafone New Zealand Limited.
Vodafone New Zealand Limited
21 Pitt Street, Private Bag 92161, Auckland, 1020, New Zealand Telephone + 64 9 357 5100 Facsimile + 64 9 377 0962
Jack,
I have compile the routine in manager,It compiles without any errors.I have also tested the routine in manager and gave me a result.
Doshian
----- Original Message -----
From:
To:
Sent: 20 April 2001 12:15
Subject: Re: Exception raised in GCI subroutine:Access violation. VERSION 4
>
> Doshian,
>
> In Manager try compiling the user written routine "COMPARE.REC"
>
> Yours Jack
>
>
>
> "Doshian
> Maharaj" To:
> are.co.za> Subject: Exception raised in
GCI subroutine:Access violation.
> VERSION 4
> 04/19/2001
> 11:44 PM
> Please respond
> to
> informix-datas
> tage
>
>
>
>
>
>
> Hi,
>
> I have a problem with the following error message - Program
> "DSU.COMPARE.REC": Line 188, Exception raised in GCI subroutine:
> Access Violation.Attempting to Cleanup after ABORT raised in stage
> ARCOCCFILE.COMPARE DataStage Phantom Aborting with @ABORT.CODE = 3.
>
> We had to reinstall our NT server therefore we loaded Datastage
> (version
4)
> as a new application.The datastage jobs ran fine before on version 4.
>
> Does anyone out their know if we are maybe missing a dll or do we need
> to configure any other files so that this problem can be sorted out.
>
> Your assistance is highly appreciated.
>
> Regards
> Doshian
>
>
> CONFIDENTIALITY NOTICE: This e-mail may contain confidential
> information and is intended only for the use of the recipient named
> above. Should you receive this e-mail in error, please forward it to
> dmaharaj@netcare.co.za and delete from your in-box. Any disclosure,
> copying, distribution or action on the contents of this e-mail is
> strictly prohibited
>
> Doshian Maharaj
> TEL : 482 - 7202
>
>
>
>
>
> CAUTION: This correspondence is confidential and intended for the
> named
recipient(s) only. If you are not the named recipient and receive this correspondence in error, you must not copy, distribute or take any action in reliance on it and you should delete it from your system and notify the sender immediately. Thank you.
>
> Unless otherwise stated, any views or opinions expressed are solely
> those
of the author and do not represent those of Vodafone New Zealand Limited.
>
> Vodafone New Zealand Limited
> 21 Pitt Street, Private Bag 92161, Auckland, 1020, New Zealand
> Telephone + 64 9 357 5100 Facsimile + 64 9 377 0962
>
I have compile the routine in manager,It compiles without any errors.I have also tested the routine in manager and gave me a result.
Doshian
----- Original Message -----
From:
To:
Sent: 20 April 2001 12:15
Subject: Re: Exception raised in GCI subroutine:Access violation. VERSION 4
>
> Doshian,
>
> In Manager try compiling the user written routine "COMPARE.REC"
>
> Yours Jack
>
>
>
> "Doshian
> Maharaj" To:
> are.co.za> Subject: Exception raised in
GCI subroutine:Access violation.
> VERSION 4
> 04/19/2001
> 11:44 PM
> Please respond
> to
> informix-datas
> tage
>
>
>
>
>
>
> Hi,
>
> I have a problem with the following error message - Program
> "DSU.COMPARE.REC": Line 188, Exception raised in GCI subroutine:
> Access Violation.Attempting to Cleanup after ABORT raised in stage
> ARCOCCFILE.COMPARE DataStage Phantom Aborting with @ABORT.CODE = 3.
>
> We had to reinstall our NT server therefore we loaded Datastage
> (version
4)
> as a new application.The datastage jobs ran fine before on version 4.
>
> Does anyone out their know if we are maybe missing a dll or do we need
> to configure any other files so that this problem can be sorted out.
>
> Your assistance is highly appreciated.
>
> Regards
> Doshian
>
>
> CONFIDENTIALITY NOTICE: This e-mail may contain confidential
> information and is intended only for the use of the recipient named
> above. Should you receive this e-mail in error, please forward it to
> dmaharaj@netcare.co.za and delete from your in-box. Any disclosure,
> copying, distribution or action on the contents of this e-mail is
> strictly prohibited
>
> Doshian Maharaj
> TEL : 482 - 7202
>
>
>
>
>
> CAUTION: This correspondence is confidential and intended for the
> named
recipient(s) only. If you are not the named recipient and receive this correspondence in error, you must not copy, distribute or take any action in reliance on it and you should delete it from your system and notify the sender immediately. Thank you.
>
> Unless otherwise stated, any views or opinions expressed are solely
> those
of the author and do not represent those of Vodafone New Zealand Limited.
>
> Vodafone New Zealand Limited
> 21 Pitt Street, Private Bag 92161, Auckland, 1020, New Zealand
> Telephone + 64 9 357 5100 Facsimile + 64 9 377 0962
>
Doshian,
I would look at the routine "COMPARE.REC" and count down around 188 lines from the top.
If I remember rightly even if you use Include statements on Routines the Line number is within 1 or 2 lines of where the problem happens.
In any case if you place a obvious compile error arround where you believe the problem to be it will report that line. ie replace a blank line with: This is an Error Line, anf then compile.
This might narrow the search.
Thanks Jack
----- Original Message -----
From: "Doshian Maharaj"
To:
Sent: Friday, April 20, 2001 4:35 PM
Subject: Re: Exception raised in GCI subroutine:Access violation. VERSION 4
> Jack,
>
> I have compile the routine in manager,It compiles without any errors.I
have
> also tested the routine in manager and gave me a result.
>
> Doshian
> ----- Original Message -----
> From:
> To:
> Sent: 20 April 2001 12:15
> Subject: Re: Exception raised in GCI subroutine:Access violation.
> VERSION
4
>
>
> >
> > Doshian,
> >
> > In Manager try compiling the user written routine "COMPARE.REC"
> >
> > Yours Jack
> >
> >
> >
> > "Doshian
> > Maharaj" To:
>
> > > are.co.za> Subject: Exception raised
in
> GCI subroutine:Access violation.
> > VERSION 4
> > 04/19/2001
> > 11:44 PM
> > Please respond
> > to
> > informix-datas
> > tage
> >
> >
> >
> >
> >
> >
> > Hi,
> >
> > I have a problem with the following error message - Program
> > "DSU.COMPARE.REC": Line 188, Exception raised in GCI subroutine:
> > Access Violation.Attempting to Cleanup after ABORT raised in stage
> > ARCOCCFILE.COMPARE DataStage Phantom Aborting with @ABORT.CODE = 3.
> >
> > We had to reinstall our NT server therefore we loaded Datastage
> > (version
> 4)
> > as a new application.The datastage jobs ran fine before on version
> > 4.
> >
> > Does anyone out their know if we are maybe missing a dll or do we
> > need
to
> > configure any other files so that this problem can be sorted out.
> >
> > Your assistance is highly appreciated.
> >
> > Regards
> > Doshian
> >
> >
> > CONFIDENTIALITY NOTICE: This e-mail may contain confidential
> > information and is intended only for the use of the recipient named
> > above. Should
you
> > receive this e-mail in error, please forward it to
dmaharaj@netcare.co.za
> > and delete from your in-box. Any disclosure, copying, distribution
> > or action on the contents of this e-mail is strictly prohibited
> >
> > Doshian Maharaj
> > TEL : 482 - 7202
> >
> >
> >
> >
> >
> > CAUTION: This correspondence is confidential and intended for the
> > named
> recipient(s) only. If you are not the named recipient and receive
> this correspondence in error, you must not copy, distribute or take
> any action
in
> reliance on it and you should delete it from your system and notify
> the sender immediately. Thank you.
> >
> > Unless otherwise stated, any views or opinions expressed are solely
those
> of the author and do not represent those of Vodafone New Zealand
> Limited.
> >
> > Vodafone New Zealand Limited
> > 21 Pitt Street, Private Bag 92161, Auckland, 1020, New Zealand
> > Telephone + 64 9 357 5100 Facsimile + 64 9 377 0962
> >
>
>
I would look at the routine "COMPARE.REC" and count down around 188 lines from the top.
If I remember rightly even if you use Include statements on Routines the Line number is within 1 or 2 lines of where the problem happens.
In any case if you place a obvious compile error arround where you believe the problem to be it will report that line. ie replace a blank line with: This is an Error Line, anf then compile.
This might narrow the search.
Thanks Jack
----- Original Message -----
From: "Doshian Maharaj"
To:
Sent: Friday, April 20, 2001 4:35 PM
Subject: Re: Exception raised in GCI subroutine:Access violation. VERSION 4
> Jack,
>
> I have compile the routine in manager,It compiles without any errors.I
have
> also tested the routine in manager and gave me a result.
>
> Doshian
> ----- Original Message -----
> From:
> To:
> Sent: 20 April 2001 12:15
> Subject: Re: Exception raised in GCI subroutine:Access violation.
> VERSION
4
>
>
> >
> > Doshian,
> >
> > In Manager try compiling the user written routine "COMPARE.REC"
> >
> > Yours Jack
> >
> >
> >
> > "Doshian
> > Maharaj" To:
>
> > > are.co.za> Subject: Exception raised
in
> GCI subroutine:Access violation.
> > VERSION 4
> > 04/19/2001
> > 11:44 PM
> > Please respond
> > to
> > informix-datas
> > tage
> >
> >
> >
> >
> >
> >
> > Hi,
> >
> > I have a problem with the following error message - Program
> > "DSU.COMPARE.REC": Line 188, Exception raised in GCI subroutine:
> > Access Violation.Attempting to Cleanup after ABORT raised in stage
> > ARCOCCFILE.COMPARE DataStage Phantom Aborting with @ABORT.CODE = 3.
> >
> > We had to reinstall our NT server therefore we loaded Datastage
> > (version
> 4)
> > as a new application.The datastage jobs ran fine before on version
> > 4.
> >
> > Does anyone out their know if we are maybe missing a dll or do we
> > need
to
> > configure any other files so that this problem can be sorted out.
> >
> > Your assistance is highly appreciated.
> >
> > Regards
> > Doshian
> >
> >
> > CONFIDENTIALITY NOTICE: This e-mail may contain confidential
> > information and is intended only for the use of the recipient named
> > above. Should
you
> > receive this e-mail in error, please forward it to
dmaharaj@netcare.co.za
> > and delete from your in-box. Any disclosure, copying, distribution
> > or action on the contents of this e-mail is strictly prohibited
> >
> > Doshian Maharaj
> > TEL : 482 - 7202
> >
> >
> >
> >
> >
> > CAUTION: This correspondence is confidential and intended for the
> > named
> recipient(s) only. If you are not the named recipient and receive
> this correspondence in error, you must not copy, distribute or take
> any action
in
> reliance on it and you should delete it from your system and notify
> the sender immediately. Thank you.
> >
> > Unless otherwise stated, any views or opinions expressed are solely
those
> of the author and do not represent those of Vodafone New Zealand
> Limited.
> >
> > Vodafone New Zealand Limited
> > 21 Pitt Street, Private Bag 92161, Auckland, 1020, New Zealand
> > Telephone + 64 9 357 5100 Facsimile + 64 9 377 0962
> >
>
>