"*DataStage*DSR_LOADSTRING" Internal data error.
Moderators: chulett, rschirm, roy
"*DataStage*DSR_LOADSTRING" Internal data error.
Hi folks, i have a job which reads the job statistics and loads them into a sequential file. The source stage used here is a universe stage. The file into which the details are loaded has been created by me and also the job is run by me so, i guess this should not be a permissions issue as mentioned in another topic related to DataStage*DSR_LOADSTRING.
DataStage Job 136 Phantom 16662
Program "*DataStage*DSR_LOADSTRING": Line 147, Internal data error.
Program "*DataStage*DSR_LOADSTRING": Line 151, Internal data error.
Program "*DataStage*DSR_LOADSTRING": Line 147, Internal data error.
Program "*DataStage*DSR_LOADSTRING": Line 151, Internal data error.
Program "*DataStage*DSR_LOADSTRING": Line 147, Internal data error.
Program "*DataStage*DSR_LOADSTRING": Line 151, Internal data error.
File '/home/dsadm/Ascential/DataStage/Projects/FDM89_TST/DS_RESENU/DATA.30':
Computed blink of 0x800 does not match expected blink of 0x0!
Detected within group starting at address 0x3F000!
Please let me know if you have any suggestions on how to resolve this.
Thanks,
Dinesh
DataStage Job 136 Phantom 16662
Program "*DataStage*DSR_LOADSTRING": Line 147, Internal data error.
Program "*DataStage*DSR_LOADSTRING": Line 151, Internal data error.
Program "*DataStage*DSR_LOADSTRING": Line 147, Internal data error.
Program "*DataStage*DSR_LOADSTRING": Line 151, Internal data error.
Program "*DataStage*DSR_LOADSTRING": Line 147, Internal data error.
Program "*DataStage*DSR_LOADSTRING": Line 151, Internal data error.
File '/home/dsadm/Ascential/DataStage/Projects/FDM89_TST/DS_RESENU/DATA.30':
Computed blink of 0x800 does not match expected blink of 0x0!
Detected within group starting at address 0x3F000!
Please let me know if you have any suggestions on how to resolve this.
Thanks,
Dinesh
Re: "*DataStage*DSR_LOADSTRING" Internal data erro
I get the above messages after the write is done into the file.djdinjan wrote:Hi folks, i have a job which reads the job statistics and loads them into a sequential file. The source stage used here is a universe stage. The file into which the details are loaded has been created by me and also the job is run by me so, i guess this should not be a permissions issue as mentioned in another topic related to DataStage*DSR_LOADSTRING.
DataStage Job 136 Phantom 16662
Program "*DataStage*DSR_LOADSTRING": Line 147, Internal data error.
Program "*DataStage*DSR_LOADSTRING": Line 151, Internal data error.
Program "*DataStage*DSR_LOADSTRING": Line 147, Internal data error.
Program "*DataStage*DSR_LOADSTRING": Line 151, Internal data error.
Program "*DataStage*DSR_LOADSTRING": Line 147, Internal data error.
Program "*DataStage*DSR_LOADSTRING": Line 151, Internal data error.
File '/home/dsadm/Ascential/DataStage/Projects/FDM89_TST/DS_RESENU/DATA.30':
Computed blink of 0x800 does not match expected blink of 0x0!
Detected within group starting at address 0x3F000!
Please let me know if you have any suggestions on how to resolve this.
Thanks,
Dinesh
Thanks,
-
- Participant
- Posts: 54607
- Joined: Wed Oct 23, 2002 10:52 pm
- Location: Sydney, Australia
- Contact:
Your DS_RESENU (resource) hashed file has become corrupted for some reason. This is highly unusual, as this file is completely used "read only" as far as I am aware.
Try this command and let us know what it says:
Try this command and let us know what it says:
Code: Select all
UVFIXFILE DS_RESENU
IBM Software Services Group
Any contribution to this forum is my own opinion and does not necessarily reflect any position that IBM may hold.
Any contribution to this forum is my own opinion and does not necessarily reflect any position that IBM may hold.
You need to be a charter member in order to see his reply as his replies are premium content and only visible to charter members.
The command he wanted you to run was
Also, dont forget to tell us what it said.
Cheers.
The command he wanted you to run was
Code: Select all
UVFIXFILE DS_RESENU
Cheers.
Creativity is allowing yourself to make mistakes. Art is knowing which ones to keep.
Hi all, The following are the results of the command
ID "DSTAGE_PLI_E_0089" doesn't hash to primary group 64
ID "DSTAGE_RUN_E_0379" doesn't hash to primary group 64
ID "DSTAGE_JOB_E_2033" doesn't hash to primary group 64
ID "DSTAGE_UDT_E_3018" doesn't hash to primary group 64
ID "DSTAGE_XML_I_6202" doesn't hash to primary group 64
ID "DSTAGE_IPC_E_7019" doesn't hash to primary group 64
ID "DSTAGE_JSG_M_0049" doesn't hash to primary group 64
ID "DSTAGE_REP_I_0183" doesn't hash to primary group 64
several more lines as above and
Error: Processing primary group 123, overflow group 0
Record length discrepancy at address 0x0003d800
Encoded size = 0, calculated size = 2048.
calculated BLINK = 0x00000800 (2048).
ID "" doesn't hash to primary group 122
few more message as above and
warning: file load discrepancy detected.
Thanks and regards,
Dinesh
[/img]
ID "DSTAGE_PLI_E_0089" doesn't hash to primary group 64
ID "DSTAGE_RUN_E_0379" doesn't hash to primary group 64
ID "DSTAGE_JOB_E_2033" doesn't hash to primary group 64
ID "DSTAGE_UDT_E_3018" doesn't hash to primary group 64
ID "DSTAGE_XML_I_6202" doesn't hash to primary group 64
ID "DSTAGE_IPC_E_7019" doesn't hash to primary group 64
ID "DSTAGE_JSG_M_0049" doesn't hash to primary group 64
ID "DSTAGE_REP_I_0183" doesn't hash to primary group 64
several more lines as above and
Error: Processing primary group 123, overflow group 0
Record length discrepancy at address 0x0003d800
Encoded size = 0, calculated size = 2048.
calculated BLINK = 0x00000800 (2048).
ID "" doesn't hash to primary group 122
few more message as above and
warning: file load discrepancy detected.
Thanks and regards,
Dinesh
[/img]
-
- Participant
- Posts: 54607
- Joined: Wed Oct 23, 2002 10:52 pm
- Location: Sydney, Australia
- Contact:
You might try to repair DS_RESENU using fixtool or uvfixfile. Results are not, however, guaranteed. You might be better to restore a good one from backup. Rename or move the corrupted copy first. There is a separate DS_RESENU hashed file in each project, so you can also copy a good one from another project, or the Template directory. Don't forget to perform a recursive copy, so that you also get the three files DATA.30, OVER.30 and .Type30. These files should total slightly over 300KB (337920 bytes on Linux).
IBM Software Services Group
Any contribution to this forum is my own opinion and does not necessarily reflect any position that IBM may hold.
Any contribution to this forum is my own opinion and does not necessarily reflect any position that IBM may hold.